Will iTunes 10.7 play my 720p HD movies on my Core Duo Mac mini that are currently on my iTunes movies playlist and playing perfectly fine in iTunes 10.6.3?

Will iTunes 10.7 play my 720p HD movies on my Core Duo Mac mini that are currently on my iTunes movies playlist and playing perfectly fine in the older iTunes 10.6.3?
Please let me know so I do not update to iTunes 10.7 and lose the ability to playback my 720p HD collection from my Core Duo Mac Mini to my Apple TV.
In the requirements it says:
• To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.

Performed the AppleTV update yesterday.  Haven't had a problem since...though it's only been one day.  Am I just hopelessly optimistic to think that AppleTV just needed to be updated to match iTunes and iOS for home sharing and airplay?
Fingers crossed...

Similar Messages

  • Will 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?

    I kinda asked this as a follow up in another thread. But I really should have asked it in a separate thread here.
    Will a 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?
    Additionally, it comes with 10.4 and IPhone needs 10.5.4 or better. Can I download and upgrade to 10.5.4 free from Apple or will I have to purchase the upgrade?
    Jerry

    The hardware is more than sufficient. You will have to buy 10.5 (Apple does not have upgrade pricing).

  • If I clean-install my mac mini that is currently running at 10.5.8, will i be able to install mountain lion?

    Please help, because I have searched everywhere, and apparently, 10.6 (Snow Leopard), is not sold in the Apple Store anymore. If i were to buy it at Amazon, it would cost me about $105~$200, which is an absolute rip-off

    Upgrading to Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions.  The cost is $29.99 (as it was before) plus tax.  It's a download.
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • Will iSight work with Intel Core Duo Mac Mini?

    Maybe it's a stupid question?

    yes yes yes yes yes. it will work. but not need to make yourself feel stupid

  • HT2729 i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer.  is this related to not having the proper itunes version vs ios?  I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...

    i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer.  is this related to not having the proper itunes version vs ios?  I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...any ideas what's wrong?

    Hi Dennis!
    I have a couple of steps for you to try in order to get those songs transferred to your iPod touch. First, make sure all of your software is updated with the latest versions. If the songs were downloaded from iTunes, you will also want to delete the songs from your library and then download them again from the list of past purchases on your iTunes account. An article about doing that can be found here:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If you try a sync after those two steps and are still seeing the issue, then I would like you to try syncing the iPod by setting it to manually manage. An article outlining more information on manually managing your iPod sync can be found here:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    If you are still having issues after that, I have another article that can outline some other reasons why your songs may not transfer to your iPod, and it can be found here:
    Some songs in iTunes won't copy to iPod
    http://support.apple.com/kb/TS1420
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to hose sons anymore. Is there a way to sync my Touch with my new

    My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to those songs anymore. Is there a way to sync my Touch with my New laptop withoit erasing my I touch?

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

    Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

    Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released.  As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

  • Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

    Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
    What else would I need? Please advise...

    Yes for keyboard and mouse.
    The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

  • I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone.  Will the base mini model run these programs?

    I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone.  Will the base mini model run these programs?

    The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

  • If I do a repair the windows small business server 2011 standard repair console, will I loose the user's and computer's that are currently setup on the server ?

     will I loose the user's and computer's that are currently setup on the server?

    Hi,
    Based on your description, I understand you want to repair SBS 2011 console (please refer to
    the TechNet article:
    Repair the Windows Small Business Server 2011 Standard Console). However, worry about losing users and groups that be created by Windows SBS Console. As far as I know, those will not lose.
    Since, when you create users and groups via SBS console, those are added to Activity Directory.
    The SBS console is a GUI component, which makes it easy to configure and manage your Windows SBS 2011 Standard network. When you repair the SBS console, this component will be affected.
    In view of your concerns, please back up before operation. It will help us to avoid some unexpected
    issue.
    Hope this helps.
    Best regards,
    Justin Gu

  • Looking for Mac mini that will run OS9

    I'm looking for a Mac mini that will run OS9 for a legacy accounting application. If anyone has one for sale please let me know. Thanks.

    For the amount of money you'd spend on VMWare, you could get a Mac that does boot Mac OS 9. Plus you need one just extract the ROM file necessary to run 9 on VMWare. Doing so, may be illegal, because the ROM chip is a proprietary design. Just get a Mac that boots into Mac OS 9, unless you know Classic is all you need. To learn the difference and what pitfalls to not run into when buying Used and Refurbished, see my FAQs*:
    http://www.macmaps.com/usedrefurbished.html
    http://www.macmaps.com/macosxnative.html
    - * Links to my pages may give me compensation.

  • Certain albums won't play on Iphone but still play perfectly fine in Itunes

    Since I updated my Iphone to IOS5, certain albums won't play. They work perfectly fine in Itunes on my imac and the still appear in my library on the Iphone, but it won't start playing. The strange thing is, they are all albums from this year. All the rest is working properly.
    Allready tried importing the whole library again but that was a waste of time.

    Having the same problem with only a few albums.
    Any news on this issue?

  • Music that plays perfectly fine in my library will skip around within the song on ipod.

    Every song begins halfway through, then skips back to the beginning, then skips to the end, and then back to the middle until the song's time runs out. Then it will go onto the next and repeat the same thing. It's getting rather frustrating and I can't seem to find anyone else who is having similar issues. All I can find is people who have problems with the ipod skipping the songs themselves, but not each individual song skipping or stuttering around like this. It is every single song I add. I have the ipod touch 4th gen. I'd just like to know what is going on. Any help would be greatly appreciated. Thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT1727 how do i register my new pc so it can transfer use my itunes songs I already paid for that are currently on my ipad2

    i have bought songs from  itunes
    they are currently on my ipad2
    i want to play them on my new pc
    cant figure out how to do it

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Will I have OSX Server in my App Store if I buy a "Mac Mini with OSX Server"?

    I am planning on buying Mac Mini for a Home Media Server, and I am curious if the OSX Server will be added to my account. Or do you think I would better get the same system configuration without the OSX Server, then buy it from the App Store? Is there going to be a difference between the two different processes.

    It won't automatically be added to your account unless you supply your account details when you buy.  But once you've received your server you can phone Apple Sales and give your details (including order number or server serial number) and they should add Server to your account for you.
    What you actually get will be identical.

Maybe you are looking for

  • Systemd does not umount in spite of StopWhenUnneeded=true

    Before going into details I have to say that although I am a seasoned Linux user, I am a noob to both systemd and Arch. My goal is to setup a backup routine that starts automatically upon connection of the relevant USB storage which cleans up after i

  • Ref.2 field of JE not updated through A/P Credit Memo

    Hi Experts, I am using SBO 8.81 PL 07. I have observed that when I create A/P Credit Memo, SAP doesnot save the Vendor Ref. (NumAtCard) field in the corresponding JE's ref.2 or any other field. It happens when we create A/P Invoice. I believe it is i

  • Can't publish to Azure Cloud Service from Visual Studio 2013

    I have a VS project that I upgraded from VS 2012 to VS 2013. I can run it locally, and had no issues publishing to Azure when I was using VS 2012. When I attempt to publish the upgraded app to an Azure Cloud Service that already exists, I am getting

  • Clearing the entries of SDCR transcation types in crm_dno_monitor

    Hi all, In the phase of charm configuration i tried to check the flow with the several request and the flow is successful . Now the charm flow is working fine. Very happy from that Now the probelm is there are many SDCR request in crm_dno_monitor. I

  • Y Error Bars

    So for my biology class i have to graph a great deal of statistic based ecology stuff. Doing these graphs is very easy, but since it is statistically based, I have to do "Y Error Bars" which means the actual Y value could be between the "Y Error Bar.