Will iTunes work with a laptop running windows 7 and 64bit?

Trying to get a system started and I'm not sure if iTunes will work with a windows 7 laptop. It has 64 bit not 32.

Yes, iTunes is compatible with 64-bit Windows 7 systems.

Similar Messages

  • Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling :(

    keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling
    I recently bought some new albums and can't play them on my ipod

    I just encountered the same problem on my 2 month old MBPro.  I found a work around by changing USB ports.  As for the actual cause or the reason why that worked, I dont know.  The USB port I was using works fine with my phone or other USB devices.

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

    I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Product key will not work with this edition of Windows 7

    I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
    The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
    services but instead I got cut off.
    At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

    Post your issue to the Windows 7 Genuine Issues forum.  Here are the instructions on how to produce a diagnostic:
    MGA
    Diagnostic Report:
    To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
    Once downloaded, run the tool.
    Click on the Continue button, after a short time, the Continue button will change to a Copy button.
    Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
    One
    Issue Per Thread:
    Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
    don't post your issue in another person's thread). 
    It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
    New
    to the Forums?
    Instructions
    by  Kamin of Ressik 
    Wanikiya and Dyami--Team Zigzag

  • TS1490 will iTunes work with a COBY mp3 player?

    will iTunes work with a COBY mp3 player?

    iTunes will only manage the content on Apple branded devices.
    For a 3rd party product use the tools that came with it, Windows Media Player or Windows Explorer. I used to use SyncToy with my iRiver H140 to copy over the compatible files from the music folder of my library into the device.
    If you decide to use Windows Media Player read this post first.
    tt2

  • Have just install itunes on a new PC running windows 8 and I am getting very bad distortion when playing music, any ideas

    Have just install itunes on a new PC running windows 8 and I am getting very bad distortion when playing music, any ideas. Music on web (youtube) is working fine.

    Use a different browser.
    iTunes can only be installed and run in desktop mode.

  • Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

    Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

    Hi,
    You can check system requirement for CS5 in link : http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
    Regards,
    Jatin Dembla

  • Voyager Legend will not work with my laptop

    I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine. 
            Bluetooth AV                                               Ready to use
            Bluetooth Remote Control                       Ready to use
            Bluetooth AV Remote Control Target   Ready to use
            Bluetooth Peripheral Device                   No Driver Found
            Bluetooth Hands-free                               Ready to use
    I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
    "Thank you for contacting Plantronics Technical Support.
    If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
    If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
    Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
    I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

    Hi Nt_winters,
    Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My I Pod will not download all content  to my laptop. running windows 7 and I Pod ver. 6.1.6.

    My I Pod will not download all music contents to my I Tunes on my Lap top when I sync.  I have tried auto sync and manual download.  i am running Windows 7 and my I Pod is updated to version6.1.6.  I have tried to sync on two different lap tops and have deleted and reinstalled I Tunes on both lap tops.
    Any suggestions?

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method   Maye you did this by "manual download"
    Managing content manually on iPhone, iPad, and iPod
    You can only sync to one computer/iTunes library so try:
    Backing up the iPOd and then restore from that backup
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • Sharing a printer attached to an iMac with a laptop running windows 7

    Hi, I have a an HP LaserJet P1005 running off my Mac - this is connected via USB. I have a laptop running Windows 7. I have printer sharing active on the Mac. The Mac can see the laptop but not connect to it. The laptop can not see the Mac. I simply want to be able to print to the LaserJet printer from the laptop but can't seem to be able to create the link. If anyone has a suggestion I would be extremely grateful. Thnx. Adam

    Hello Adam,
    If you download and install Bonjour for Windows, this will assist the Win7 laptop with locating the shared LJ on the Mac.
    Pahu

  • Why wont itunes download on my laptop running windows vista, keep getting error message 127, help

    Why wont itunes download on my laptop running on windows vista, keep getting Windows error127, can anyone help please this is driving me insane, tried 9 times already without
    success.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Need help, itunes freezing on PC laptop running windows 7.

    I have itunes 10.6 on my pc laptop running windows 7.  today itunes freezes as soon as it opens and doesn't open fully to the itunes store or my music.  what's happening?  how do I fix it?

    do you mean its not recognized, or you do not know how to connect it properly ?>

  • BlackBerry Link will not install on new Laptop running Windows 8

    I have been trying to download Link from BlackBerry.com over several days now. on a new laptop running Windows 8 
    I get a message saying the *Wizard was interrupted before BB Link could be completely installed. * it suggests that * the system has not been modified and that I try again at another time and run the set up again.* I have done so at least 1/2 doz.. times with no success.
    Pleas advise as to corrective actions to take and/or solutions to this problem.
    Thanks in advance
    Robert Mathieson

    Hello robertian047, 
    Sorry to hear about your issue. 
    Have a look at the following article which may help you out. 
    Wizard was interrupted before software could be completely installed
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Will iTunes work with an old IBM Thinkpad and Windows 2000?

    I am trying to set up my daughter's old ThinkPad 380XD so she can use it with her new iPod Nano. I have loaded Windows 2000 SP 4, with the latest MS updates. I have tried the iTunes setup that came on the CD with the iPod as well as downloading iTunes from the Apple website.
    I have been able to get both iTunes and QuickTime installed and can launch QuickTime ok. When I try to launch iTunes, I get a message that says "iTunes.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is being created." When I check the event log, I do not find any entries that match the time or description of the iTunes message.
    I have looked at previous posts for this problem and do not see a clear solution except to disable firewalls or anti virus programs. I don't have either operating but I do see that I only have 32Meg of RAM and iTunes would like 128Meg. Is this the cause of the problem and would it affect iTunes and not QuickTime? If RAM is the problem, is there any solution other than increasing the physical RAM?
    Thanks in advance.
      Windows 2000  

    Sorry, no. You would have to have 2000 at least to be compatible.
    Also, iTunes will not work without QT, as QT is the playback software used by iTunes.
    Message was edited by: StarDeb55

Maybe you are looking for

  • Can Crystal Server 2011 run on a Windows 2012, R2 server?

    Hey, I purchased Crystal Server 2011 in April 2013.  Unfortunately, due to a heavy workload I'm just now ready to install it in a test environment.  Will Crystal Server 2011 run on a Windows 2012, R2 server?

  • Site to Site VPN between Cisco ASA 5520 and Avaya VPN Phone

    Hi, I am wondering if anyone can assist me on configuring Cisco ASA 5520 site to site vpn with Avaya VPN Phone? According to Avaya, the Avaya 9630 phone acts as a VPN client so a VPN router or firewall is not needed. The scanario: Avaya System ------

  • HT201272 How do I get my music to play after iMatch?

    I just purchased new computer and transfered all info from one iMac to new iMac. Now I'm unable to play music because iTunes can't locate music. I'm not able to download previously purchased music/movies because a "downloaded" button is showing on ea

  • Launch DS in compact fieldpoint

    Hi, I have two simple VIs that uses datasocket, Write DS.vi and Read DS.vi. I'm using the function  Launch DS Server if Local URL. In my computer works ok, but when I execute my VI in a compact FIeldPoint (cFP-2020), DS server don't works. It appears

  • Putting videos into iTunes library

    For some reason, my iTunes doesn't recognize .avi or other video files except for .mpg ones and it doesn't put them in the library. I have currently 3 video's, all .mpg. Can you help me please?