Will iweb continue to work with other web host after june 2012

will iweb continue to work with other web host after june 2012

as long as osx supports it, iweb should work beyond june 2012 as an app by itself.
however, the some of the currently published code will break when mme servers are to shut down; unless apple comes up with a patches by then.
most of mme features can be replaced and fully implemented on other host servers.
Password protection
can be implemented with apache server.
Blog and photo comments
with Intense Debate commenting system, ex:
http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12_Dynamically_Resize _iFrame.html
no need for manually resizing iframe.
if you have comments on mme servers and value them then you should find ways to archive them, because they'll be gone:
https://discussions.apple.com/message/15528258#15528258
Blog search
with google search, as long as your site is indexed with google search engines.
Hit counter
with statcounter and can have the same look as mme hit counter:
http://home.cyclosaurus.com/Cyclosaurus.html
as for photos page's popup slideshows, everything can be packaged in an installer so there is no need for editing, find+replace of anything.
if i feel good i just may release my installer for iweb slideshow patch.

Similar Messages

  • Will MobileMe mail continue to work with OSX 10.5 after June 30, 2012?

    Since I can't upgrade a PowerBook G4 beyond Leopard (OSX 10.5), I'm not able to migrate MobileMe services such as Mail to iCloud. Although I understand the .mac and .me email domains will continue to exist, it's not clear whether my Mail App (Mail 3.6) will still work. Has anyone found a KB posting or other info that addresses this?

    I don't believe this is correct. The configuration for the iCloud mail server is published in the KnowledgeBase.
    http://support.apple.com/kb/HT4864
    "iCloud Mail uses IMAP and SMTP standards supported by most modern email applications..."
    I believe there is no reason that my current Mail App 3.6 won't be able to continue to work with the iCloud Mail servers.

  • Will airport extreme card work on other wireless systems

    will airport extreme card work with other networking systems such as time warner cable with a router?

    Note, Airport Extreme on PowerMacs is limited to 802.11g.  If you find you get a router that is 802.11n, and have devices that need 802.11n speed, they should be on a different wireless network.  Otherwise you can set the network to be 802.11n and 802.11g for both 'n' and 'g' devices to hook up to it from the router in question.  Be sure the PowerMac in question does support Extreme, and not just the original Airport by visiting this article:
    http://support.apple.com/kb/ht1621
    And identifying your Mac in this article:
    http://support.apple.com/kb/HT3082
    If you can't find your Mac on the article, go to Apple menu -> About This Mac and tell us the Machine ID. If it is a notebook, the name of the machine is on the screen frame. If it is a machine with a display and a built-in optical drive that has no name, it may be an iMac.  That is significant as well.  Since you posted in the PowerMac forum, without telling us your machine, we can't help you further until you do.

  • When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

    When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

    I have exactly the same settings in Options (in both computers)
    for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
    It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
    Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
    so I changed 4 settings in about.config
    browser.tabs.warn on close true
    browser.warn on quit true
    browser.warn on restart true
    browser.show.quit warning true
    but the problem with sessions appeared only 1 week ago.
    So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

  • Does ws adapter only work with asynchronous web service?

    Hi all,
    can you please confirm whether or not ws adapter (PI 7.1) only works with asynchronous web service?
    I have created an async. outbound service interface in PI 7.1, generated the client proxy in ECC, created an web service based on the proxy, wrote a test program to call the web service (PI scenario uses ws adapter in the sender CC). Everything works fine.
    Then I did the same thing with sync. outbound service interface. I got exception while calling the web service in ECC.
    I've heard that ws adapter is designed for async. communication. Does it mean that it won't work with sync. web service?
    I haven't seen any official SAP document saying taht ws adapter only works for async. web service. If you have any, can you please share it?
    Thanks
    Jayson

    Thank you all for your information.
    The error I got when calling the proxy with logical port (web service) is:
    SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404  : Not Found") 
    I will debug it to see what exactly happens. And will keep you guys updated.
    Just debugged, the error is because the http header's content type is text/html while it should be test/xml. However this type is set by the ws runtime, not by the application. Anybody has an idea about this?
    Jayson
    Edited by: Jayson on Feb 18, 2009 10:04 AM
    Edited by: Jayson on Feb 18, 2009 12:11 PM

  • Game center wont recognise my apple ID but works with other accounts? On mountain Lion?

    Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

    Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

  • Will my ipod classic work with windows 8

    I am finally updating my Windows XP desktop to a Windows 8 laptop.  Will my ipod classic work with Windows 8?  I've seen a ton of problems from other users with regard to compatibility.

    Do yourself a big favor. Switch to Windows 7. (Or buy a Mac.)

  • Will the Linksys WRT160N work with windows vista at all?

    Will the Linksys WRT160N work with windows vista at all? 
    Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
    I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
    E.g.(Comments like These 'which are not my own')----------
    "When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run." 
     "It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
     "It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .." 
    E.g. (CommentContradicting to what has been said above)------
    "Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
    So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
    So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks 

    It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

  • ISight not working with other apps

    I've currently been having a problem with my Intel iMac (specs in signature) since the iSight works with iChat (the green light turns on and everything), but it doesn't work with other apps such Delicious Library or Photo Booth. I also have a Windows XP partition on here, and it works just fine.
    With Photo Booth, I just get a green screen and no message. On Delicious Library I get a white screen and no message either. I've tried deleting the .plist file for Photo Booth, but that hasn't worked. Any ideas on how to fix this issue?

    If nothing above solves your problem, try all relevant suggestions from http://docs.info.apple.com/article.html?artnum=93240
    If the problem continues, you may have a hardware or software conflict. Some users report that plug-ins installed by Delicious Library cause conflicts with iSight.
    If your problem remains after trying all relevant Troubleshooting suggestions, uninstall D/L (or at least remove any QuickTime plug-ins D/L installs) to see if your system has a D/L conflict.

  • How to work with others in a same workspace (I mean collaboration)?

    I need to work with others in a same workspace.
    Is there any mechanism support collaboration in JDeveploper?
    Many thanks.
    Ben

    You can use a version management software to do this.
    JDeveloper has excellent support for CVS which is a free version management tool.
    You need to install CVS on a server that will provide access to all the users and then you can check-in your workspace and others can check it out.
    In addition you can download extensions to JDeveloper that support Subversion, Clearcase, Perforce, and Serena Dimension as version management software.
    For a basic introduction to working in teams with JDeveloper and a CVS repository see:
    http://www.oracle.com/technology/products/jdev/viewlets/1013/cvs_viewlet_swf.html

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

  • Will a WRE54G repeater work with a WRT160N router?

    I'm using a WRT160N router and only getting 2 bars out of 5; fair signal. A friend has offered to sell me a WRE54G range expander. Will a G repeater work with an N router?

    Yes,the WRE54G should work with WRT160N...You need to match all the wireless settings of the router to the range expander and it should work then.

  • HT4059 Will iBook Author books work with an iPad 1?

    Will iBook Author books work with an iPad 1?

    Look at these.
    http://bluemic.com/snowball/
    http://www.lifeisaprayer.com/articles/photography/iphone-4-ipad-external-mic-aud io-input
     Cheers, Tom

  • Will the Cinema Display work with an older MacBook Air?

    My wife has an older MacBook Air (circa late 2009) with one USB 2.0 port and one Mini Display port. Will the Cinema display work with this model Air?

    It looks to me like the cinema display is a DVI connection.  If  you have a MiniDisplay port to DVI adapter that connected the MBpro to the display then you have everything you need.  (plus a DVI cable).   The MDP adapter plugs into the Thunderbolt port of the MBair.

  • Will Microsoft Office 2001 work with the Lion upgrade?

    Will Microsoft Office 2001 work with the Lion upgrade?
    Will one have to reinstall after the Lion upgrade?

    Office 2001 will not work with Lion. That is a Power PC App which is no longer supprted in Lion. You should upgrade to Office 2011, Apple iWork, or Open Office.

Maybe you are looking for

  • KB3008923 Makes Microsoft Dynamic CRM 2013 add/change javascript in Form Dialog impossible - Fix is use CHROME or remove update.

    After KB3008923 was installed on my computer we found out that in Microsoft Dynamic Crm 2013 we could not change Form Script or add Form scripts as the dialog adding/maintaining this did not work any more. The dropdown box is empty and the function a

  • Moving layers between contact sheets?

    Created a hard copy portfolio of 60 images for photoshow purposes and 3 (CS3) contact sheets to go with it. Trying to shift\move selected thumbnails between contact sheets, but what the program seems to be copying rather than moving. I can deal with

  • 5D Mark III and SD Card Speeds

    Is there any truth to the claims in this link that the SD Card speeds are limited by the 5D Mark III to 133x? Canon 5D Mark III and SD Cards Thanks! Nothing is more simple than greatness ~ Ralph Waldo Emerson

  • Can't get through installation?

    I've been in the midst of downloading iTunes+Quicktime for quite some time now. I've re-dled it over and over, but it won't go through or continue after it says Status:Stopping Services An error then pops out saying to make sure I have the right priv

  • Autom. Gruppenamenzuweisen bei ASCIILoad

    Hallo Zusammen, ich lade mein ASCII-File mit dem Befehl ASCIILoad, dabei wird aber der Name von ASCII-File nicht automatisch in die Kanalgruppe zugewiesen(was mit DataFileLoad passiert). Hat jemand da eine Idee? Eine generelle Frage, wo finde ich die