Will iWork apps update, when the OS is taken up from 10.8.5 to 10.10?
Have installed iWork '09 in 10.8.5. Does someone know: will the iWork apps update, when I take the machine to 10.10?
Thanks, David Allen
Thanks, Niel.
Is the separate download a whole new purchase, despite having already purchased? Or, is this one of those cases of apps that have to be 'accepted' in the software update process, to then be available for actual update?
Similar Messages
-
I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!
Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh. -
When trying to perform apps updates, says the apps are no longer available. Microsoft office Word, Excel, PowerPoint and Chrome?
Not sure how I got in AppleWorks. I was having slow internet issues as well. I checked the apps later, and they were able to update.
-
IWork Apps Quitting when asking for "help"
All iWork Apps quit when I tap the Help Icon. Anyone have any idea what's up?
— ThanksTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
I'm trying to submit my app update to the store and I get the following error:
Error
The submission can only contain one appx or one appxbundle.
So I thought I should maybe utilize the "Delete" option to allow me to submit an updated appx or appxbundle (since these are the only file types that App Studio allows us to build). However, when I do, I get the
following message:
Can't delete this package
You must have at least one 8.1 package in your submission.
... So I'm basically stuck. Can't delete to upload a new one. Can't upload a new one because there's one already there. It would be nice if you could automatically sunset the old appx/appxbundle package in favor of the new
one.
Update: Solved! Solution below.Since this is still an issue, shouldn't it be escalated for a fix so that the page works on any modern browser?
I see two independent problems here:
- Hitting Delete should work, not bash the user with a "You must have at least one 8.1 package in your submission." message (i.e. allow the developer to delete and then add a new file, if so desired). After all, when making the initial submission
we are in the same situation (no file yet), so it can't be that bad, as long as this is checked for at a later stage.
- Show that Replace button which seems to be hiding! If it is a Silverlight issue, why require Silverlight in the first place?
P.S.: I am experiencing this with IE (no Replace button, Windows 8.1 x64 and latest updates). -
My ipod touch was downloading a update when the battery went dead now it only has a blue screen
my ipod was making a update when the battery went dead and now my ipod shows only blue
See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
You may need a computer app like the free HandBrake to convert the format to one compatible with the iPod. -
Tring to launch iBooks just flashes an goes back to launch icon My iBooks is refusing to launch on the new iPad. Worked yesterday. . I have restarted the iPad and nothing. Latest os and no app update in the store. Help
Have you tried closing the iBooks app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with iBooks 'open' on-screen, though it sounds like you can't get it to be open anyway) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset (not sure whether this is what you meant by a restart) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?
spicer_the_coalman wrote:
I cannot export projects from GB in my MacBook into GB on my iPad3
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
(Let the page FULLY load. The link to your answer is at the top of your screen)
spicer_the_coalman wrote:
nor can I export from IPad to my MacBook.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen) -
PowerMac G5 will ONLY boot up when the side panel is removed
Hi,
We have a PowerMac G5 Dual 2.5GHZ . This mac will ONLY boot up when the side panel and the clear plastic panel are removed. If the Mac is assembled, the Mac will start and Chime, but thats it. No display and the fans are dead quite. Any Suggestions? Thanks in advanceHi, I realised that this problem has ONLY occured AFTER I installed Leopard. I then reformated the hard drive and installed 10.34 ( the OS that came with the G5) and it is as good as gold. I then reformated the hard drive and installed Leopard. After a few minutes the G5 became noisy and unstable. I then reformatted the hard drive AGAIN and reinstalled 10.34 and it stable. How can I install Leopard without the machine behaving erratic? Thanks for any advice in advance
-
Will data be updated in the infocube if char. are added after instalation
Will data be updated in the infocube if charecteristics are added after instalation? can any one help me.
Nag,
do you mean tat the IO is added to te cube after data has been loaded ? ( I am not sure if you can do this )
If it means customizing the delivered version of Business content , you will have to add te IO o the update rules as well , and add the same if required to the Transfer rules and data source to populate date.
BW is not that intelligent enough to realize what IOBJ you have added and how you want it filled without you specifying the same.
Arun
Assign points if helpful -
WRT54g v3 firmware update when the power was interrupted.
I have a WRT54G v3 modem. firmware update when the power was interrupted. now is access the router's web-based setup page not open and power led are flashing. DMZ led 5 seconds are flashing.
Help me please!As the power light on the router is flashing,it means the firmware of the router is corrupted...Try this link and try to re-flash the firmware once again....Once done,reset the router for 30 seconds,power cycle the router and check..
-
When the option to buy music from israel will be available?
Hello
I want to know when the option to buy music from Israel will be available
Because I want to buy music from itunes and I noticed that it is impossible for Israel
Thank you for considerationHow would anyone here know that?
I beleive it's against the rules of these discussions to speculate on Apple policy. -
I am tring to import files into Aperture, permanently, from files on my desktop. Aperture will import them, but when I take those files away from the desktop they also then leave Aperture? Help appreciated thanks joanlvh
You can seelct to leace the files where they are, copy into Aperture or else put them someplace else on the HD.
What is your setting? -
Until the most recent update when the url that I wanted in the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?
cor-el, thank you so much. That fixed it, but does this mean I can't use AVG Safe Search.Is there a substitute? I do like the security (hopefully real) that it offers. What now? How do I get out of Safe Mode?
Sherry -
How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer
When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.
Maybe you are looking for
-
hi, Is there any report from where i can fetch the offcycle payments made to employees on different dates in a particular period. Also the amount of offcycle payments made along with the tax on offcycle payment as and when made.(we have configured in
-
Hey SAPians, i am stuck here with an issue. i am trying to print a report using spool in Russian, its status ends in error. however when i try printing same in english its status is complete. where am i going wrong, how do i make this work? THANKS IN
-
"Use iTunes to restore" - Doesn't recognize
My 1 GB iPod nano (first generation? says 2006 on the back) just stopped working while I was skipping to the next song. A message came up (in several different languages) that said USE iTUNES TO RESTORE. I connected to iTunes and did a restore. Then
-
Generating an SWF using Javascript
Has anyone had any success generating an swf using nothing but javascript. Is there a module or an API that I can tap into to accomplish this feat. Thank you for your time
-
[solved]Trouble with Grub
Hi, I just installed Arch a few hours back. The only problem I had was the grub wouldnt install. My old grub(from ubuntu) is intact though it has no arch in the menu and it has a old Windows option(I deleted windows partition while installing arch, w