Will LabVIEW 6.0.2 professional development system install on WIndows XP?

I wrote a small state machine in LV 6.0.2 under Windows 2000 for controlling and communicating with an instrument via RS232 port.
I own the 6.0.2 professional development system.
1. Will I have problems porting it to Windows XP?
2. Can I develop 6.0.2 applications on Windows XP?
3. Can I use the 6.0.2 run-time engine on Windows XP?
4. Any known issues with using the 6.0.2 Measurement and Automation Explorer with XP?
Regards,
Larry Taibbi
Projects Manager
Ashton Services
35 State Street
Northampton, MA  01060
[email protected]
[email protected]

Some people have reporting having issues while others reported that it worked fine.  I'm not sure what caused the distinction between the two.
Have you tried installing and using it?
R

Similar Messages

  • How to create a standalone executable in LabVIEW 2009 Professional Development System?

    How to create a standalone executable in LabVIEW 2009 Professional Development System?
    Solved!
    Go to Solution.

    This should help you out http://zone.ni.com/devzone/cda/tut/p/id/3303
    Also remember that quick search with Google in many cases will be quicker than asking in this forum. I always use Google before I ask for help in any forum. It is much quicker
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Free (?) upgrade because Acrobat 7.0 professional won't install in Windows 7

    I have Acrobat 7.0 Professional running under Windows XP pro with no problem. I understand from user forums that this version does not run under Windows 7. Does Adobe offer me a free upgrade to a version compatible with Windows 7 or am I forced to buy yet another piece of software from Adobe in order to be able to use Acrobat under Windows 7 ???

    Thank you Bill for replying.
    I have been able to install the disc but it tells me that I have to activate it with a time limit of 30 days and counting.  Activation fails each time I've tried.  As I'm nearing the end of the time limit I decided to contact Adobe for advice.  They gave me a download package and new serial number but it's only suitable for OS XP and Windows 2000 so I'm unable to download it.  I was told by the advisor if I still had problems to use the forum as a means of support so that's why I'm talking to people here.
    I have uninstalled Adobe Acrobate Pro 7, so I might try reinstalling the disc to see if it gives me another 30 days grace, that, at least, would be a way around it.
    I'll now follow the link you've given me.   Though I do suspect I'm in a bit of a cul de sac.

  • AE 7.0 Professional won't install on Windows 7 64bit

    When I insert the disc and the Autoplay comes up, I click on the first option "Install After Effects 7.0".
    A window pops up asking me what language I am using. I select English and then the setup window comes up with an error message window behind it. I have to move the setup window to read it. It says:
    "Runtime Error
    Program: D:\Adobe After Effects 7.0\Setup.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    What can I do?
    Thanks!

    After reading your post I tried messing around a little bit and discovered I could install it just fine in safe mode. It worked just fine after it was installed. I appreciate you responding though. Thanks!

  • Labview 8.5.1 Professional for sale

    We no longer have a need for our copy of Labview 8.5.1 Professional Development.  There are two discs that say 8.6, so there may be an upgrade.  Would like to get $2100 for it.  If interested, please e-mail [email protected]
    Thanks,
    Mitch

    ascaples wrote:
    1. do you still have it?  I can upgrade to the current Labview for $2500 so 2100 seems a bit steep.
    [email protected]
    You do realize this thread is 4 years old, right?  Just buy the new version for yourself.  You'll be better off that way.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Removing Professional Development Suite

    I want to totally remove all traces of the Professional Development System from my PC.  There is nothing shown in the "Programs and Features", so Ii need to do some kind of brute force method of removal.  Can someone provide a step-by-step guide that I can follow?

    hartzde wrote:
    I want to totally remove all traces of the Professional Development System from my PC.  There is nothing shown in the "Programs and Features", so Ii need to do some kind of brute force method of removal.  Can someone provide a step-by-step guide that I can follow?
    There should be a National Instruments Software in the Programs and Features.  You can uninstall NI products with that.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

    I submitted this support request to NI on 8/12/2010.
    When I compile my LV 8.6 app in LV2010 I get this error:
    "LabVIEW 10.0 Development System has encountered a problem and needs to close.  We are sorry for the inconvenience."
    I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
    I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile.  I then sent NI tech support "my code".  The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
    My LV 8.6 app compiles and runs great in LV 8.6.  I don't want to be left behind with the newer upgrades and I want to move to LV2010.  I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
    I was told this will be looked @ in LV2010 SP1.
    One note...back up your LV8.6 data before you move to LV2010.  Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
    I restored all of my LV8.6 code and I'm back working with LV8.6.
    It's a tough call, do I stay in LV8.6 and get left behind?
    Do I bite the bullet and try to debug this mess in LV2010?
    I was told the compiler is completely different in LV2010.  That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software.  I can't afford to re-compile LV code every few years.  Like most people, maintaining my Apps with customer's revisions, and modifications is enough work.  I don't want more work!
    I was told LV2010 SP1 would likely appear in May or June of 2011.  I'd hate to break out my old Turbo Pascal apps again...but hey...they still work!  My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution.  But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
    I found another Bug with LV2010...you are going to love this one!
    There is a new "LV Update Service".  Perfect!  I like updating my LV software when new patches are available.  When I click "update" the update spins over and over "Checking for New Version".  I have let it run ALL day with no results...just sits and spins over and over.
    OK, I know give NI a break!  Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement.  I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
    Thanks,
    Doug

    For your update service problem
    Unable to Update Current Version of NI Update Service
    Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

  • LabVIEW Base Development System for Windows

    Hello,
    I want to buy "LabVIEW Base Development System for Windows", but i have some questions, include this version functi...
    a)TDMS streaming VIs
    b)Wavefoem VIs
    and the last question, is it possible with this version do some executable code?
    thanks for all..

    Here is a decent list of the differences between the versions of LabVIEW.  Since you want to create executables, you will need to add the Application Builder.  If you find there are other functions that you may need, I would just bump up to the Professional version.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

    I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
    ErrorCode: -17600,
    Failed to load a required step's associated module.
    LabVIEW Run-Time Engine version 9.0.1f3.
    When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
    My TestStand Engine Version is 2012 f1 (5.0.0.262).
    I'd appreciate any help on this issue.
    Roman

    Hi Roman,
    There are a couple of things you can try:
    1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
    Check if the simple VI is loadable and runs without errors in TestStand.
    If the step generates the same error, you should try a re-install of the LabVIEW development system.
    If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
    1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
    Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
    Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
    2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
        Right-click "Build Specifications" and choose "New->Application(EXE)".
        In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
        Save the properties.
        Right-click on the newly created build specification and choose Build.
    Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
    You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
    Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
    If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
    Regards,
    TRJ

  • SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

    Hello Experts
    I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
    I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
    Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
    Regards
    Atush Rohan
    Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

    hi,
    actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority...   now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ...  also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
    ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
    ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
    so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will  schedule the date..... yes they can do that.
    hope this will surely help you!!!
    thanks & regards,
    Punit Raval.

  • Labview Full Developement System 8.2 on Windows 7

    Hi there,
    I have a question about the compatibility of Labview Full Developement System 8.2 and Windows 7.
    Is it possible to run this system without problems on a PC that is using Windows 7?
    I am also using the Labview DSC module (version 8.2.1).
    I'm just wondering if I will get problems when I am going to run programs that I made, in Windows 7.
    Or is there a new version of Labview that is compatible with Windows 7?
    If so, is it possible to use older versions of Labview in this new version (bij transfering the files).
    I hope to hear soon from some of you.
    Regards,
    Kenny

    LabVIEW 2009 is the first LabVIEW version officially compatible with Windows 7 (see also)
    Quote: Starting with 6.0.2, LabVIEW should run on newer, unlisted versions of Windows without error messages, but these are not officially supported.
    (However, I was able to run LabVIEW 8.2 just fine under windows 7 64 bit. I don't know if there are potential DSC issues. Another option is the windows XP compatibility mode virtual PC available for some version of Windows 7).
    LabVIEW 2009 and 2010 are fully compatible with Windows 7. You should be able to open your LabVIEW 8.2 files fin in any newer version. For details, have a look at the LabVIEW version compatibility matrix.
    LabVIEW Champion . Do more with less code and in less time .

  • Error message:" labview 7.1 development system has encountunered an error"

    sir,
    I had written program which had compiled earlier successfully, now i had improved the program for having some external diaplay by including sub vi 's consisting of DIO lines, the program when compiled now is shutting down abruptly giving a message " Labview 7.1 development system had encountered a problem and windows  is shutting it down" . I have checked the program again by removing that sub vi's of DIO lines and again its getting compiled. I will be very thankful if u could help me to solve this problem.
    vamsi

    This post is a duplicate. Please follow replies here.
    -thanks-
    Travis M
    LabVIEW R&D
    National Instruments

  • NI LabVIEW Base Development System for Windows and NI CVS-1454

    I have NI CVS-1454 and NI LabVIEW Base Development System for Windows (LabVIEW 8.5, no LabVIEW Real-Time Module and Vision Development Module). How can I build a LabView-program and run it on my CVS-1454?
    Kirill Kostousov

    Hi Kirill,
    In order to use your CVS-1454 you will need to buy the LabVIEW Real-Time Module and Vision Development Module as these features are not supported in your version of LabVIEW.
    Thomas Clark
    Applications Engineer
    National Instruments UK & Ireland

  • How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

    I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

    We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available).  Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
    If I have to downgrade to LabView 2012, where can I get the installation for this?

  • LabVIEW 2011 Development System fails to install

    I have just tried several times to install my new copy of LabVIEW 2011 Dev Suite, but get an unknown exception (with no details - see attached picture) right at the start of installing the development system (English 32-bit).  I have rebooted and closed all applications including virus scanning but still the same.  I am using WinXP Pro SP3, and already have LV 8.6, 2009, and 2010 installed.  I'm completely baffled as this type of problem has never occurred before and there is no information about the cause of the exception.
    Mike
    Solved!
    Go to Solution.
    Attachments:
    LV2011 Unknown Exception.JPG ‏10 KB

    Hi John,
    After clicking on Details, the words "No information" or similar are displayed.  I have tried again today but with the same result.  I have attached a new screenshot showing the installer initialisation progress window.  I have checked the DVD and it looks undamaged, and there is plenty of free disk space.
    Attachments:
    LV2011 Unknown Exception.JPG ‏64 KB

Maybe you are looking for