Will Lightroom 3 run under Windows 7 Home Premium?

I'm about to upgrade my OS to Windows 7 Home Premium and wonder if Lightroom 3 will run under this OS? The Release Notes identify "Home Premium" as a suitable version of Vista, but don't make any mention of the "flavours" within Windows 7 - just "Windows 7". I don't want to upgrade to an OS that won't support Lightroom 3.

People have reported online that they have had no issues with the LR3 on Win 7 Home Premium.
http://www.dpreview.com/forums/thread/3143875

Similar Messages

System Restore will not run on Vista Home Premium

I cannot get system restore to run on my T61 using Vista Home Premium I get messages like:
"The Restore point could not be created for the following reason: The writer experienced a transient error. If the backup process is retried the error may not reoccur". It did.
I also get "Rescue and Recovery Backup Service stopped working and was closed. A problem caused the applicaion to stop working correctly. Windows will notify you if a solution is available." It did not.
I have also been advised no restore points are available.
The net effect is I cannot use System Restore at all!
Has anyone else had a problem like this with system restore? Lenovo has been no help.I have had a number of Dell computers and this is my first (and last) Lenovo. When it was quite new and the problem occurred , I contacted them but they just blew me off..
RHM

So i assume that your T61 originally came with Vista Home premium installed??? Did you make the Recovery Media disks when you first got your machine??? If not call Lenovo up and obtain those disks, and then use them to reinstall your service partition and your OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

ColdFusion 5 - will it run under Windows 2003 Enterprise Server R2?

I currently have ColdFusion 5 running on Windows 2000 and
need to upgrade the os
to 2003 Enterprise R2. I don't know, but I'm guessing, it
will easier to continue using 5
than to upgrade to 7 or 8.

It could be a couple things;
CTC only runs (and / or only runs well) on the specified version of JRE. It doesn't like anything older, it doesn't like anything newer ... the suggested version (1.3.something last time I looked - I don't remember off the top of my head).
CTC takes forever to initialize (in some cases on our Lab stuff, I'm talking minutes ... up to 5-7 MINUTES before anything comes up).
Start it and go have lunch, if it's not up when you get back, downrev your JRE and try again (then go home for the night, and see if it's up in the morning).
If it's still not up, then try it on Windows 2000 server (or a VMware / VirtualPC session on S2003).
If you're running it through something like a Citrix server, take a vacation for a few days ....
This is not one of Cisco's finest software endeavours.
Good Luck
Scott

Reposcan x64 will not run under Windows 2008 Server R2....

Hello,
When i run from the command line
reposcan.exe -dbdriver sqlserverdatabasesubsytem -connect u201CUID=xx;PWD=xxxxxxx;DSN=xxxxxxxxu201D -dbkey xxxxxxx -inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D -outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D -outputdir "c:\reposcan logs" -repair true
reposcan pops up for 1 second and closes, no log outputed
I have also tried...
A text file called Reposcan.txt
-dbdriver sqlserverdatabasesubsytem
-connect u201CUID=xx;PWD=xxxxxx;DSN=xxxxxxxxxu201D
-dbkey Linfxxxxxxx
-inputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Inputu201D
-outputfrsdir u201CC:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Outputu201D
-repair false
"C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
none of the above work, any ideas?
I am running with admin privliage
Edited by: davitali on Dec 28, 2011 3:58 PM

Problem solved.
Solution:
1. Create two files, Reposcan.bat and Reposcan.txt
2. In windows 2008 x64, right click on reposcan.bat and select "Run as Administrator"
3. When running the first time, remove the "-repair" option from reposcan.txt. Check the results in the ouput diectory
4. Before inserting the repair option, backup CMS, CMS_Audit tables and also the entire Business Objects Directory
Reposcan.bat
"C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.exe" -optionsfile "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\reposcan.txt"
Reposcan.txt
-dbdriver sqlserverdatabasesubsystem
-connect "UID=xx;PWD=xxxxxx;DSN=xxxxxxxxx"
-dbkey xxxx
-repair
-inputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Input"
-outputfrsdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\FileStore\Output"
-outputdir "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\reposcan"

I bought a new Windows 7 computer. I currently have Lightroom 3.6. Will this run on WIndows 7 and how do I download it onto my new computer?

I bought a new Windows 7 computer. I currently have Lightroom 3.6 on the old computer. Will this run on Windows 7 and how do I download it to the new computer?

Yes, Lightroom 3.6 runs on Windows 7
Go to Google, type in:
Lightroom 3.6 Download Windows

Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

yes, though you may need to use compatibility mode to install.

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

JavaSoundRenderer now running under Windows

Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomas

Hi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Does Photoshop Elements 13 run under Windows XP?

After going thru hell with Support on the serial number issue, I find out that PS Elements 13 doesn't run under Win XP? Is this correct? Please don't tell me to upgrade, I KNOW.

That's correct. Elements 13 will not run on Windows XP.
Photoshop Elements 13 requires Windows 7 or Windows 8.
System requirements | Adobe Photoshop Elements

Is CS5.5 ok to run under window 8?

Dear Sir / Madam
I will buy new computer with OS window 8 Pro (64bit).
So my existing CS5.5 is running under window XP in my old computer
Could you please advise about questions as below:
1. How to transfer CS5.5 to new computer with OS window 8 Pro (64bit)?
2. How to solve this error from running Adobe Illustrator CS5.1?
I am looking forward to your reply
Andrew

If you do not own discs for CS5.5, you can download CS5.5 trials versions to your new computer from the web site page linked below and then use your current serial number to activate it. You need to follow the Very Important Instructions to do that properly
http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
You are allowed to maintain two machines with activated installations of Adobe software as long as they are not both using the same software at the same time. If you prefer to remove the software from the older machine you should deactivate it first (under the Help options) before uninstalling.

I install compatibility reporter in my Mozilla firefox 5 running under Windows 7 and get message - TypeError: Components.classes[cid] is undefined, what is causing it please?

I am having to install Compatibility reporter so that Google toolbars will work. This used to be ok, but now I am getting the message-TypeError: Components.classes[cid] is undefined. I am running under Windows 7 any idea how |I can get round it please?

If you force an extension to install by overriding the compatibility then the result can be unpredicted.<br />
The extension may work or may not work or cause error messages like you posted.<br />
You always need to be careful with forcing extensions to install.
You may need to check extensions.checkCompatibility prefs on the <b>about:config</b> page.
* http://kb.mozillazine.org/extensions.checkCompatibility

How do I re install windows home premium OA?

I had windows home premium OA on my computer , but I believe it was accidentally uninstalled from my hard drive. I have the product key that is on my computer. I was having trouble finding the correct link to reinstall it on my lap top.
When I went to the microsoft Website all I found was support for windows 8 . Can you give help me with the proper link? thank you

Please provide the manufacturer and model of your pc.
It is possible you have a hidden recovery partition on your hard drive which may be used instead of a recovery disk to restore your system (and Windows) to factory defaults.
Recovery procedures vary from manufacturer to manufacturer.
You should also search for any recovery disk/s that were supplied with your pc. Manufacturers invariably charge a significant fee to supply replacements.
If you decide to use borrowed/downloaded media to reinstall Windows on an OEM pc, the process may not be straightforward. Without some experience and patience you may end up with no other option than to pay a professional to finish the job.
Microsoft does not publicly provide download links for Windows. While you may stumble upon an official download source, beware that many unofficial sources will come pre-loaded with viruses, trojans etc.

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

HT1414 I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my OC runs under Windows 8.1. IOS 7.1. Someone can help me, please?

I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?

It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant.

I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.

I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.

Will Lightroom 3 run under Windows 7 Home Premium?

Similar Messages

Maybe you are looking for