Will Lion Install Consume a lot of Disk Space in my Time Capsule?

I have a 500 GB iMac which is about 2/3 full and a 1T Time Capsule which is a little over half full.  I'm getting ready to install Lion.  As far as by backups go, is this just another backup or will it consume a much bigger part of my TC since it is a major upgrade? 
Should I just upgrade and not worry about disk space?

After installing Lion TM will then backup all the new system files which can amount to about 6-8 GBs.

Similar Messages

  • NFS consumes a lot of disk space on server

    I have solaris 10 on sparc. I have encountered problem with hdd disk space when running NFS. When Nfs client has mounted nfs resources. On the server I can observe that each day utilisation on mounted filesystem grows. When I unshare NFS resources the file system usage is much smaller. It is strange, because the size of files located on the shared filesytem doesnt grow so much.
    Does anybody know how to deal with it ? Is there any nfs cache which makes the reservation of hdd resources ?

    I had same problem. when resource was mounted used space grown but returned to initial state when the file system was umounted. That was because nfs daemon created temporaly files when were opened and removed those files when the file system were unmounted.
    search files with .nfs extension in the nfs share resource
    EXAMPLE:
    # pwd
    /data
    # find . |grep -i nfs
    Good luck

  • "internal disk space needs repair" Time Capsule error message

    I had successfully transfered my entire iTunes library to my TC. Worked without a hitch for a week.
    Today, I downloaded an album FROM iTunes. In the middle of the download, it froze. I noticed I was dismounted and my TC light had turned orange (now blinking) and I received the mesage "internal disk space needs repair."
    From what I've read on this board, I'm supposed to reformat my TC and start again. That's an unacceptable solution. Is there another way?
    Also does anyone have experience in archiving their TC? And will that preserve my precious (to me anyway) iTunes library?

    vwozniak wrote:
    Thank you, honestly it is all over my head!! Will pull out the books and see if I can figure out how to do what I need to do. But, thanks!!
    If you don't understand something, ask!
    Your backups are in a +sparse bundle+ on your Time Capsule's internal HD. That's what appears on your desktop and/or Finder sidebar when Time Machine is doing a backup (unless you've told the Finder not to show them). If it currently appears, just eject it, then right-click the TM icon in your Dock and select +Back Up Now.+
    For the +TM Buddy+ widget, click your mouse on the words "Click here" in my previous post (anything on these forums that's shown in blue or purple, and is underlined when your mouse passes over it, is a "clickable link" -- clicking on it will take you to that web page.
    On that page, click the Download button towards the upper right. That will download and install it. Then press whatever key or mouse button you have set up for Dashboard and select +Time Machine Buddy.+ You'll see a display like the one pictured on the web page.
    If it doesn't show the box with messages, click the "disclosure" triangle to the left of the word Messages. That should show the messages for the last backup attempt. Click in the message area, and it should be outlined in blue (as shown on the web page). Then click Cmd-A to +Select All+ (and the whole background will turn blue), then Cmd-C to Copy to your clipboard.
    Then come here to post a reply, and when this box is outlined in blue, press Cmd-V (or select Edit > Paste from the menubar) to paste the messages here.

  • I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time.  However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

    The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
    My new Mac Book Pro does not have home vault open.  But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available.  Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop? 
    When I go into the time capsule - it shows me NOTHING as being in the backup datas.  So, I don't know where to begin to delete all the old data off the
    time Capsule and start with a completely empty machine. 

    Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
    Here is how to do this:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Disks icon at the top of the AirPort Utility window
    Click the Disks tab below the icons
    Click Erase
    The "Quick Erase" option will only take a moment or two
    Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

  • Will Lion install correctly handle multiple accounts from Snow Leopard?

    Will Lion install correctly handle multiple accounts from Snow Leopard? Will current settings, DOCS etc be carried over?

    I found the solution to my problem after I upgraded and it lies with the X509 Anchors.
    SOLUTION:  Go to /Library/Preferences/com.apple.security-common.plist (it may be a hidden file) and change it to /Library/Preferences/com.apple.security-common.plist.bak.  This should remove the system calling to old outdated anchors and allow it to use the new security protocols under Lion's sandboxing feature.
    It worked for me and mail runs fine.

  • How can I select the minimum size of Elements 10? It won't install due to lack of disk space on C:

    I have just purchased and downloaded Elements 10. Can't install it due to insufficient disk space on my C drive. I have enough space on my D drive, but it will not install there, probably because my sustem files are on C drive. The Install wisard does not provide for a selection of the size of Elements 10. Is there a way to select the minimum size? If so, how can I do this?

    There is not an option to customize the installation.  The system requirements for Photoshop Elements 10 request that you at least have 4 gigabytes free, plus more for installation, how much free space do you have on your C drive?

  • Does Spotlight use a lot of disk space?

    I'm new to Macs — in fact, my first one hasn't arrived yet — and I'm wondering if Spotlight will tie up a lot of disk space? I'm getting a MacBook Pro with a 100GB drive (modest by desktop standards), and I've noticed that Windows search products (e.g., Google Desktop, MSN Desktop) can create 3-5 GB of data after indexing even a modest 30GB hard drive. If Spotlight is going to "waste" gigs of space on my limited laptop drive, I might look into disabling it. Thanks.

    Do not worry about it. On my book disk (100Gb with 60Gb occupied) spotlight uses the following space:
    big:~ mtsouk$ ls -l /.Spotlight-V100/
    total 278972
    -rw------- 1 root admin 219443200 Apr 15 07:23 ContentIndex.db
    -rw------- 1 root admin 238 Feb 28 18:56 _IndexPolicy.plist
    -rw------- 1 root admin 304 Apr 3 23:42 _exclusions.plist
    -rw------- 1 root admin 378 May 28 2005 _rules.plist
    -rw------- 1 root admin 66211840 Apr 15 07:23 store.db
    big:~ mtsouk$
    Mihalis.
    Dual G5 @ 2GHz   Mac OS X (10.4.6)  

  • Report consuming a lot of temp Space (BIP)

    Hi Experts,
    I am facing an issue.
    Some BIP reports consuming a lot of temp space (5-30 gb temp directory), which is causing service down (BIP, RMS, ReIM and RPM). BIP, RMS, ReIM and RPM are installed on same server.
    Please help to troubleshoot this issue.
    Thanks in Advance

    plz see
    Troubleshooting Oracle BI Publisher Enterprise 11g [ID 1387643.1]
    Troubleshooting Oracle BI Publisher Enterprise 10g [ID 412232.1]

  • In Shared services, Log Files taking lot of Disk space

    Hi Techies,
    I have a question. Its like the Logs in BI+ in Shared Service Server is taking lot of Disk space about 12 GB a day.
    Following files are taking more space
    Shared Service-Security-Client log ( 50 MB )
    Server-message-usage Service.log ( About 7.5 GB )
    why this is happening. Any suggestions to avoid this.
    Thanks in Advance,
    Sonu

    Hi Techies,
    I have a question. Its like the Logs in BI+ in Shared Service Server is taking lot of Disk space about 12 GB a day.
    Following files are taking more space
    Shared Service-Security-Client log ( 50 MB )
    Server-message-usage Service.log ( About 7.5 GB )
    why this is happening. Any suggestions to avoid this.
    Thanks in Advance,
    Sonu

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • I have lost the audio for Youtube on all three browsers I have installed-Safari, Chrome, Firefox. I have Lion installed. I have tried restarting my MacBook several times, still no sound. What to do?

    I have lost the audio for Youtube on all three browsers I have installed—Safari, Chrome, Firefox. I have Lion installed. I have tried restarting my MacBook several times, still no sound. What to do?
    <Email Edited By Host>

    I forgot to include in my post that I had downloaded the new flash after the "no audio" began and it did not help. The problerm began some time after I installed OS 10.7.4.

  • Internal Disk Error - 3rd Generation Time Capsule

    HI all,
    I have read many of the discussion points relating to the "Internal Disk Error" on a Time Capsule and the need to take it to pieces, extract the drive and use DiskWarrior or similar to restore the data.
    I use my TC as a backup drive, so although the data was important I didn't need to recover it.  I have connected it via a caddy and erased it.  The drive is perfectly viewable on my Mac via USB in the caddy.
    When I have reconnected it all (correctly) in the TC and connected to it the "Internal Disk Error" remains.  The TC therefore still doesnt work as a backup drive just an expensive wireless Access Point.
    Any ideas, as I could really do with the drive backing up my Mac again....

    The Gen3 finished production June 2011 but most are older than that. It does suggest all of them are over 2.5 years.
    Do you have a computer still running 5.6 utility.. that will give you a lot more info??
    Gen 3 has a bunch of faults caused by the failing ceramic caps.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
    The ones with Flextronics power supplies are probably more fragile than the Delta.. did yours have a black plastic coated power supply or was it translucent plastic??
    That is why I suggest using it via USB as it will not load the power supply as badly.

  • I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • Deleting Sparse Disk Image Bundle from Time Capsule

    Howdy. Thanks in advance for help on this issue to anyone kind enough to spend time answering it.
    I've got a 1TB Time Capsule which I use primarily for external file storage - it's currently got just about 120GB of files on it which I have manually copied there. I only sporadically use Time Machine to do automated backups, but since I've had the Time Capsule for a good long while, there have been many backups, and relatively little space left on it. As I am not interested in files that are 8 months old, I have gone into Time Machine and deleted all the old backups I don't want, then done a fresh backup so there's a current copy of everything on my laptop. It's my understanding that deleting backups from within Time Machine clears space off the Time Capsule, and when I did those deletions, saw that the available space on my Time Capsule did in fact increase, but not nearly as much as I would have expected.
    Now, there's a file sitting on my Time Capsule called a "Sparse Disk Image Bundle.dmg", which has a filesize of 564GB - so there's where all the "free" space on my Time Capsule is accounted for.
    My question is, if I know that I don't want the contents of all the old backups, but I DO want a copy of the files I have manually copied onto my Time Capsule, is it safe to delete the 564GB .dmg file? I use my Time Capsule more than anything else as the repository for my iTunes library, and it'd be a huge bummer if I wiped out my entire music collection by deleting that file.
    So far as I can tell, the contents of my Time Capsule and that .dmg file are separate, but I don't know enough to know whether that's really the case.
    Any advice is well appreciated!

    Hi, and welcome to the forums.
    Yes, network backups are in an odd container called a +sparse bundle.+ It should be named with your Computer name plus a string of 12 numbers and letters (the hardware address of your Mac).
    Do you see your "other" files separate from it? They shouldn't be inside it, unless you specifically copied them into it.
    As long as they're shown separately, yes, you can safely delete the sparse bundle. That will delete all your backups, though, and take quite a while. If it seems to be taking forever, see the blue box in #12 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    There is an alternative, however. You can limit the +maximum size+ of the sparse bundle, per #A8 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum). As noted there, however, if you update to Snow Leopard, 10.6.3 or later, it will be automatically re-sized to the size of the TC's internal HD.
    If it's already too large, you may need to delete some more backups and/or "compact" it first. See the pink box in #12 of the FAQ.

  • HT4522 what is the preferred disk erase mode for Time Capsule

    I've been wanting to re-format my Time capsule as I've bought a new Mac Book and currently have 2 backups loaded. Since I've merged data, I wanted to erase and re-use the TC.
    Can someone tell me what the preferred disk erase mode is for TC.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit
    Click the Disks tab at the top of the next window
    Click Erase Disk
    You will be presented with several Erase options.....Quick Erase, Zero Out, 7 Pass, etc.
    Quick Erase will only take a minute or two and be fine for your purpose since you are keeping the Time Capsule.
    If you were moving the Time Capsule to another user, the Zero Out option will replace everything on the drive with zeroes. This will take 3-5 hours depending on the size of drive that you have in the Time Capsule.
    7 Pass zeros the drive 7 times, etc.
    BTW, the Time Capsule drive is formatted in Mac OS Extended (Journaled). This cannot be changed unless you pull the drive from the Time Capsule (voids the warranty), place it in a separate enclosure and use Disk Utility to make the changes that you want.
    Then, you have to reinstall the disk back in the Time Capsule.

Maybe you are looking for

  • File I/O and StringTokenizer

    Hi This may be really simple, but I seem to have problem here. I am reading a txt file using FileReader and I am just printing it out. The txt file has lots of lines. What I want now is to take just the lines which has an = sign on it( there should b

  • Adobe acrobat 9 pro installation/licensing issues

    I installed my licensed copy of Acrobat 9 on a new Windows  7 system.  Acrobat launched but would not open files and shuts down on attempt. Message is "Licensing for this product has stopped working" with subtext "You cannot use the product at this t

  • Want to change my payment option

    I wish to change my payment option. i am not able to see the credit card details in a/c information.unnessarily I have been charged every month.

  • What does the setting "auto increment column templates"

    I have noticed that there is now a setting "auto increment column templates" but I cannot find out what this setting does. There are no sequences generated nor triggers. Version 3.0. Thanks, Joep

  • Where is OnLocation?

    I can't find OnLocation. Is it installed with Premiere Pro CS3, or separately? Documentation says it is on the installation disc, but I have the downloaded version, and there is no option in Setup to select OnLocation. I don't see it separately avail