Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Similar Messages

  • Logic 8 and 3rd party plugins after upgrade

    has anyone upgraded yet??????, whats the word on compatability on the 3rd party plugins
    are they not going to work until they are updated again ???
    has anyone tried or has anyone got the good word?
    becasue mine will be here tomorrow
    rock on

    there are issues with multi-Output Instruments in the AU side; other than that so far so good .

  • Leopard logic pro 8 3rd party plugins

    Hey all,
    are all 3rd Party Plugins working in Leopard??

    All the ones I use are. Hope this helps!

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

    I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

    Welcome to Apple Support Communities
    For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
    The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
    If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

  • Which Digidesign interfaces work best with Logic Pro ?

    Can anyone tell which of these work best with Logic if any at all?
    - Digi-003
    - M-Box Pro
    - M-box2
    - M-Box mini
    - M-Powered

    Thanks for the posts
    After hearing complaints about latency, driver
    issues, horrible quality,incompatibility with there
    plugs in logic as well as no chance to stand against
    performances and sound quality of other hardware half
    there prices i thought to ask.
    Wow. All that??? And then they recommend Migraine-Audio to you??? I don't think those posters know what they are talking about.
    I've been using Logic since it could be used with Digidesign hardware, from version 4.8.1, and it has always worked very well.
    It does pay to research the setting up of a DAW computer, as it is almost never just "plug-n-play" like many people believe. But once it is set up, it can run for years without problems. Most people experience problems because they change the setup, install free plugins, change audio gear, every other day of the week, and of course, that makes for a very unstable situation. No wonder they complain. But it is their tech-ethic they should be complaining about, not the equipment.
    Can anyone verify there set ups and latency?
    Here's one extensive test I did on my Digi 002R:
    http://nicksevilla.com/logicpro-som/LogicTests.html
    The latency is the same as with other comparable FireWire interfaces. Not more, and not less.
    i wont drag this out into a long post i just want a
    round about, all logic users in other forums seem to
    be against Digi hardware, most advised to buy the
    cheapest possible M-Audio interface just to run M
    Powered Pro Tools if i realy need PT at all.
    Really??? All of them???And did they know they are advising you to buy stuff that actually does NOT work properly??? Shame on those posters you read, as Digidesign drivers are a LOT more stable that the Migraine-Audio ones. Digidesign themselves told me to stay away from M-Audio... so you read into that whatever you like. I'll keep that advise from them.
    Cheers

  • Which OSX version works best with Logic Pro 7.2

    Hello everyone,
    Was hoping i could get some opinions on which osx version works best with logic 7.2
    i currently have OSX 10.4.2 but i would like to update at least to 10.4.3 (that is least required to run logic as stated in install manual)...
    should i go for 10.4.4, 10.4.5 or 10.4.6 ?
    which would run best with logic pro 7.2?
    thanks much everyone
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  

    10.4.5 was rock solid for me, and three days into heavy Logic use at 10.4.6 is proving to be just as good.
    Get caught up, and go ahead and update to 10.4.6

  • Which midi controller works best with Logic Pro?

    I want pads to make drum loops etc.   I'd also like to slice and edit samples.  So far I've looked at Akai MPCs and N.I. Maschine.

    OK I found one... the Akai LPD8.  Excellent product.  It is so much more intuitive to play drums on these 8 pads rather than on the keyboard. You don't need the displays or extra pads of the more expensive models.  This has a nice on screen editor that is very programmable and it was plug-and-play in UltraBeat.  It's powered through the supplied USB cable so you don't need a power adapter. This is strictly a controller and has no on-board sounds but the sounds in Logic Pro and Garage Band are amazing. Well worth the $49.95!  You can slice and dice in Logic so that function isn't needed; similar effects can be acheived by simply holding down the pad and releasing it as a sound is modulated.  Also it is very portable - the size of your laptop keyboard.  Great fun!

  • Audio Unit Problem with Logic Pro and Mainstage

    When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

    I just tried pasting my crash report. It seems like it is too long to post?

  • Leopard, ps cs3 and 3rd party plugins

    help again please.
    I have PS CS3 and numerous 3rd party plugins but as soon as I installed the new OS 10.5 I get the msg. one or more plugins are currently unavailable on your system. They worked before the upgrade of os10.5. I even upgraded to 10.5.1..The plugins I can't get are Nik color efex pro complete and Nik sharpener pro complete. The Nik website states they are compatible. Other 3rd party plugins like Fluid Mask 3, Genuine Fractals and Flaming Pear all work. Help if you can please. I already have a msg. to Nik software for help but have not gotten an answer from them..
    Thank you.
    sincerely
    karen

    To use your Nik Software products on a new Intel-based Mac Computer with Photoshop CS3, simply follow these three easy steps below:
    1. Quit / Exit out of Adobe Photoshop CS3 and navigate to the Adobe Photoshop CS3 application file which is typically at the following location: Macintosh HD | Applications | Adobe Photoshop CS3
    2. Highlight the Adobe Photoshop CS3 application file icon and press Command + I (+ I) to open File Info.
    3. On the File Info window (as shown on the right), check the box next to "Open using Rosetta", then close the window.
    That’s all there is to it. Photoshop and Nik Software filters will work without a problem.

  • FInal Cut X and 3rd Party Plugins from Previous Versions

    will they be compatible?
    i've got plenty of 3rd party plugins i've normally used with fcp 6.
    will i be able to use them with fcp x ? or is it a completely new platform?
    cheers.

    I've said it elsewhere, but using FCX is like being asked to carve a roast and being handed knife purposely dulled to keep me from hurting myself.
    However, while it is not a viable tool for the broadcast professional, I am sure there are many professionals who can use it to do their job.
    To the OP, FCP 6 plugins, will work in FCP 7.
    BenB wrote:
    ...snip...
    As for plugins, FCP X uses a whole new underlying framework, totally, radically different technologies under the hood than legacy FCP 7 versions.  So those plugin developers will have to port their wares over to the new platform.
    ...snip...
    This is in fact, largely untrue. FCX effects are Motion wrappers, often interfaces directly to FxPlug plugins that have  been around since Motion started. The FxPlug plugins developed for earlier versions of the software need to be rebuilt with the new frameworks and Motion wrappers constructed, but FxPlug 2 is not radically different technology from FxPlug 1.2.5.
    Patrick

  • CS4 and 3rd party plugins - icons disappear

    I'm having problems with CS4 on Vista 64bit with 3rd party plugins. I'm aware that 64bit issues exist but even on the 32bit CS4 Photoshop's toolbar icons disappear once Nik, OnOne etc are installed. I've left CS2 installed as well on the same system and this works fine.
    This could be a problem with for the 3rd party developers of course but obviously CS4 has changed something.
    I have Vista 64bit with 8gb RAM. Disabling the GPU functions doesn't help nor does running CS4 in XP compatibility mode. Removing the plug ins is the only way to resolve the problem.
    Just wondering if anyone else has hit this problem and even better found a solution to it.

    I think I can recall the behavior being confirmed for Nik and they are working on a fix/ update. The situation may be the same for other tools/ vendors, so you'll probably have to live with it for a moment or resort to using older versions of PS...
    Mylenium

  • Photoshop CC 2014 and 3rd party plugins

    When I installed Photoshop CC2014 my 3rd party plugins didn't port over. Do I have to reinstall them?

    Moving this discussion to the Photoshop General Discussion forum.
    Petermclennan considering Photoshop CC 2014 is a new version of Photoshop you will need to reinstall your third-party plug ins.

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

  • Which CD Authoring software works well with Logic Pro X ?

    Hello,
    I've been using Logic Studio (Logic Pro 9) and know that Waveburner will no longer work if I update to Logic Pro X. So which CD Authoring software works well as an alternative to Waveburner ?
    Thanks,
    Matrose

    Waveburner is a standalone app. If you have it installed and working now it will continue to work if you buy and install logic x, Waveburner will not be affected. Logic 9.1.8 will also happily sit next to logic x on your system.

Maybe you are looking for

  • Ipod touch is not working .... totally dead

    Just purchased the ipod touch for my daughter-- (Christmas gift) it has shut off and will not do anything--- I have it on charge, but it will not even register on the screen that it is charging-- any ideas? it just shut off while she was playing on i

  • Performance Point - need to limit permissions to Sharepoint lists

    I set up Performance Point Dashboard Designer.  And as per Microsoft's instructions, I set up an Unattended Service Account for the Performance Point Service Application. And I gave this account read permissions under the Web Application's "User Poli

  • $Is there a fee for submitting iBooks Author to iTunes?

    Other than hiring aggregators to format and submit our iBooks Author books to iTunes, would there be a cost to submit?  If we don't use an outside source, I mean. thanks, artdough

  • Tax Determination Bases on Bill to Party and Ship to Party

    Hi Guru , I have a requirement Tax should be determined based on Bill to Party and Ship to Party. If Bill to and Ship to are  Overseas Customers then '0' TAX. For all remaining Customers 7 % Tax Could you please advice Thanks

  • How do you create scroll bars in Stickies using xcode with LION?

    I was reading this but its out of date but I still want to make scroll bars on my sticky notes: http://mac.appstorm.net/how-to/utilities-how-to/become-a-stickies-ninja-tips-tri cks-secrets/ (its the last tip on the webage) thanks