Will Logic Pro 8 Work with OSX 10 .7.5

Is Logic Pro 8 compatable with LION on a Mac Book Pro ?
2.33 GHz Intel Core 2 Duo
Memory 2 GB
Thanks for your help.

CCTM wrote:
Hi
Logic 8.0.2 runs fine in Lion. The installer on the original dvd's will not run however, so you would need to install it using Pacifist.
CCT
edit
2G of RAM is a bit low.
2 GB is a bit lean, but LP 8 should be OK-ish with it. I used to run LP 8 on a G4 with only 1.8 GB. I would recommend the OP to install Menumeters, to keep an eye on RAM use. I ran Tiger (10.4.11), Lion probably has a bigger RAM footprint. If at all possible, go to 4 or even 8 GB.

Similar Messages

  • Will logic pro 9 ( work with....

    newbie here..will logic pro 9.0 or 9.1 work on a G5 2.0 dual with 4 meg ram..on leopard 10.5.8

    9.0.* will, 9.1 won't. Both are officially unsupported on PPC, 9.0.* versions run fine though. 9.1 won't, it cannot be installed on PPC, only on Intel.

  • Does Logic Pro 9 work with Yosemite?

    Does Logic Pro 9 work with Yosemite?  or do I need to upgrade? 

    Latest OS X & Logic Pro Compatibility Information

  • CAN LOGIC PRO X WORK WITH WIN 7 OS 64 BIT

    IS LOGIC PRO X COMPATABLE WITH WIN 7 64 BIT

    No. It runs on OS X only.
    Please stop typing in caps. It is considered shouting on the web and is also more difficult to read.
    Allan

  • Will Logic Pro X work well with OS X Yosemite?

    I use Logic Pro 8 and am thinking of upgrading to Logic Pro X 10.1.1.  I am currently using Mac Pro operating on an OS X 10.8.5 which is not current enough.  However, in the past I had a nightmare experience of upgrading to OS X Yosemite and not being able to use my sound card and other disasters.  Will the new Logic really work with Yosemite without glitches?

    Model Name: Mac Pro
      Model Identifier: MacPro3,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.8 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache: 12 MB
      Memory: 6 GB
      Bus Speed: 1.6 GHz
      Boot ROM Version: MP31.006C.B05
      SMC Version (system): 1.25f4
      Hardware UUID: 83ACD615-A179-50AC-902D-76E4FF31F5AD
    I'm using Mbox 2, connected with USB
    Does that change any of your suggestions?

  • Does Logic Pro 9 work with Mountain Lion?

    Hey!
    I was wondering...
    My computer has Snow Leopard installed and i would really like to get Mountain Lion. BUT there is a problem... I don't know if Logic Pro 9 will with Mountain Lion. Can anybody help me with it? And also does Logic Pro 8 and the microsoft pack (word, powerpoint, excel etc. 2011) work too? Please help me if you know it
    THANK YOU
    Cheers
    - Kufax

    Since I'm not in the middle of anything critical and have multiple backups, I decided to take the plunge and upgrade. I've only been running for an hour or so, but here's where I am:
    2008 MacPro, 8x2.8Ghz, 16Gb RAM. SSL MADI PCIe card for I/O. Logic 9.1.7
    Tested with a couple of recent, decent size projects (40+ tracks, VIs and plugins). Not seeing any perormance differences.
    Working:
    - Euphonix MC Mix
    - UAD2 Duo
    - Spectrasonics Omnisphere
    - NI Komplete 8
    - Waves 9
    - Soundtoys 4
    - Wallander Instruments
    - EW Play
    - Melodyne
    NOT Working:
    - Access Virus TI. Plugin opens but cannot connect to Virus. I am running the latest stable v4 release - I will try installing the v5 public Beta and report back. This is a deal breaker so if I cannot get it working I will roll back to Lion
    - SSL Duende Native. Authorization is failing. Possibly a CodeMeter issue or just authorizations lost during upgrade - will look at this next.
    Make sure you are running the latest iLok driver - there was one released a few days ago.
    More as it develops.

  • Logic Pro dont work with ProTools HD3 with XD card and Apogee converter's

    My Logic Pro dont want work with ProTools HD3....
    I have G5 dual Core with 2 GO Ram, and ProTools HD3 and a Apogee converter's (with XD card extention).
    I have in the same comuter Logic Pro 8, and i can't use the DSP of ProTools HD, and the Logic Pro plug-in and Protools HD plug-ins dont want work too.
    I contacted Apogee, Digidesign and Apple for this problem, but anyone have the solution....

    Hi DMS Debah
    I got PT HD 2 and works great here !
    TRY this : http://duc.digidesign.com/showthread.php?t=54888
    Download this :http://www.digidesign.com/index.cfm?navid=54&itemid=25974
    Read this : http://en.440forums.com/forums/lofiversion/index.php/t38958.html
    try to change your Logic audio drivers ! you'll see there is(select it ) DAE
    driver, TDM option and Core audio driver! You have to chose DAE driver then
    reboot the logic Pro then it will work
    Best,
    u
    PS : Si tu ne peux pas le faire on va réessayer
    Message was edited by: jannhewi
    Message was edited by: jannhewi

  • Cant open logic 9,get a message saying logic doesn't work with osx lion 10.7.5

    I'm running OSX Lion10.7.5 and I reinstalled Logic 9 and a message comes up "logi 9.0.0 doesn't work with this OSX", I first installed Logic when I had OSX 10.5.8 and it worked.

    Update Logic Pro 9.0.0 to 9.1.8
    I assume you are using the boxed DVD set so here is the appropriate link....
    http://support.apple.com/kb/dl1601

  • How will Logic Pro X run with a 2006 iMac (Intel Core 2 Duo, 2.16 GHz, 4GB ram)?

    I have a 2006 iMac 2.16 GHz, 4GB ram, Intel Core 2 Duo. I am not planning on using plug-ins, I am a beginning artist and Logic Pro seems to have more than what I need. Any help would be greatly appreciated.

    Yes it will.. I would recommend you use the combination of  Snow Leopard 10.6.8 and LPv9.1.5 (or 9.1.8 if you have to..) with that particular hardware to get the best performance out of it... I would not recommend running any OS X version higher than 10.6.8 as each new version of OS X from then onwards.. placed a bigger performance hit on the hardware... and frankly, less stability with LP9.
    As to how well it will run on that hardware.. will more depend on the sort of loads you place on it.. depending on the type and content of the music you wish to compose... It will run and you should be able to create reasonable sized projects.. but again, it all depends on the plugins used.. the number of them... the number of tracks and so on... so to give a more precise answer is difficult.

  • Will Microsoft Word ever work with OSX Lion?/Worth switching to iWork just for

    I have the Microsoft Office Suite that I got with my computer, I want to know if it will work with an eventual Lion update before I consider updating to OSX Lion. I would like nothing more than to be able to update, but don't know if I'm willing to justify paying the 60 for iWork and then the 30 for LIon. Any suggestions either way would be great! I have been looking at the iWork package, but don't know how I feel about making the switch over...

    Office 2008 and 2011 run under Lion, but Office 2004 and the Office 2008 installer don't.
    (59590)

  • Does logic pro 10 work with the akai mpk25?

    looking to buy the logic pro. not having fun with Ableton.  I feel like logic pro is worth it.  also do all the plug-in come wiith it?  Do I need anything extra after buying logic pro to hear them through monitors?

    Its not really about if it works with Logic Pro 9 or X
    It's more about if it works with the version of OS X you are running or intend to run later....
    So if it is currently working under Mavericks 10.9.3 then it should work with LPX or any other Audio program... for that matter.
    Cheers..
    Nigel

  • Will Acrobat Pro 7 Work with Windows 7?    It did NOT with Vista.

    I create fillable forms using Pro and have never had any problem getting Acrobat Pro to install the PDF driver with Windows 6 or XP. 
    However, I have tried every "solution" offered by Adobe to get the driver to install on my new notebook which runs on Vista.  I have also downloaded and installed both Vista service packs.  The driver still will not install,
    Without the converter driver, I cannot do a substantial portion of my work on the new computer. 
    I was going to upgrade to Acrobat Pro 8 but found out from other irritated users that Pro 8 also failed to install the driver using Vista.
       Am I the only customer who thinks there is really shoddy support from Adobe on this issue?
    I am willing to upgrade to Windows 7.  However, if Pro fails to work with Windows 7 like it did with Vista then the upgrade would be another waste of my money.  If we cannot depend on Acrobat Pro to work on the Windows platform, my company (5000+ employees) is going to have to find other software.
    Has anyone had success getting Acrobat Pro (7, 8, OR 9) to install the PDF converter driver with Windows 7 ?
    Thanks!

    What is the "method" to get around issues with Windows 7 64bit?  My XP machine failed and I've bought a new one running Windows 7 64bit.  I'm trying to get a credit card statement, but I can't read it because the  downloaded Acrobat 9 I'm trying to install - won't install. Something about it not being "compatible" with Windows Vista and 7 operating 64bit.  How long has Vista been around?? - at least a couple years. Why hasn't Acrobat been able to get "compatable" in all this time??  Right now it seems I'm screwed because I unknowiing bought a 64bit machine.
    I've been told at work that the answer is to get some sort of similated 32bit operation going that Acrobat can handle. Can you please tell me how to do that? I'd really appreciate your help.   

  • Does Logic Pro X work with the Tascam US-1800 interface?

    Hello,
    I am new to Logic Pro (I haven't downloaded the software yet) and I have a Tascam US-1800 that I used with Cubase LE 5 in the past. I have heard that the Tascam US-1800 works with Logic programs and have confirmed that it works with Logic Pro 9; but I am not completely sure if anyone has tried Logic Pro 10 with the Tascam US-1800 yet. Does anybody know if it is compatible? Moreover, has anyone faced any problems when recording with a Tascam US-1800 on Logic Pro 10 yet?

    Its not really about if it works with Logic Pro 9 or X
    It's more about if it works with the version of OS X you are running or intend to run later....
    So if it is currently working under Mavericks 10.9.3 then it should work with LPX or any other Audio program... for that matter.
    Cheers..
    Nigel

  • Does Logic Pro X work with M-Audio ProjectMix?

    Has anybody tested the M-Audio ProjectMix with LPX? I know that it could work with mountain lion, even without new drivers. But does it Work with Logic Pro X?

    I originally just upgraded from LION and the drivers loaded fine... once I started to use LPX, I realized I had way too many plugins and other apps on my Mac that I had acumulated over the years and I wanted to have a simpler, cleaner set-up, so I actually reformated my hard drive and re-installed everything from fresh. I haven't run into any bugs so far... make sure you have 10.8.4 running and the latest M-Audio Firewire Drivers and you should be OK.
    I also use a few other DAWs that I purchaesd while Logic was languishing but I took them all off (other then StudioOne which I use if I need a 32bit environment) so I can be dedicated to just LPX.
    I figured out the input monitoring issue, there's a new button in the preferences that selects just monitoring on focused tracks... turn that off if you are recording multiple instruments.
    Lastly, if you do have some old 32bit plugins, and you have them in VST format (not AU), you can use a combination of JBridgeM and DDMF Metaplugin to run 32bit VSTs in LPX... it works very well. I have a Focusrite LiquidMix 32 unit that I thought I would have to let go but it works fine using this bridging set-up.

  • I am considering buying a new Macbook Pro 13" non-retina either the 2.5 GHz or the 2.9 GHz version to run Logic Pro X. My question is whether there is a noticeable difference in how well Logic Pro X works with the 2.9 GHz model vs the 2.5 GHz one.

    Is there a noticeable performance improvement with running Logic Pro X on a 2.9 GHz model vs the 2.5 GHz one and yes I would have 8GB of RAM installed on the 2.5 GHz one if I were to buy it. Thanks!

    My buying advice - the 'entry-level' new 15" MacBook Pro. Take a look at the specs. It's a wonderful machine - and you can upgrade RAM and HD to fit your needs without voiding the warranty. I don't know of any apps that I currently run that can't take advantage of the quad-core, and almost everything is 64-bit now.
    I'd used the money you saved from not buying an out-dated 17" and put it into software. If you're transitioning from Windows that can add up quickly (which isn't to say you can't run your Windows apps using Boot Camp or a VM like Parallels.
    Just my opinion - but if I could buy anything I wanted right now, I'd go with one of the upgraded 15" non-Retina MacBook Pros.
    Clinton

Maybe you are looking for

  • Pdf attachment through workflow

    Hi SDNers, I need to attach a PDF to send mail in my workflow. Workflow triggers whenever PO changed or release at ME22N or ME21N. Which PO has been changed, data PO details need to display in PDF. For this I created a smarform by passing PO number.

  • Traffic lights on push button

    Hi all,           In my requirement i have a field as push button , now i require to put traffic lights on this push button.I am displaying alv grid through class cl_gui_alv_grid please help me with a sample code. regards, kushagra

  • In LabVIEW OI the Run Selected Step Using Test UUTs does not work

    TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0 The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq. When selective steps were selected to run within the LV OI u

  • Another Filter Question

    I have a master/detail page that has some non-destructive filters that filter the master list (thumbnails) based on one or multiple criteria. sometimes the different criteria combinations return nothing after the filter. and the master list(spry:repe

  • How to permanently disable quick links

    Recently Firefox has started doing something extremely annoying - activating something called quick links whenever I use an apostrophe ('). The only way I have found to disable it is to go into about:config and add a boolean to disable it, but when I