Will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?

will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?
Message was edited by: Youngzink13

That's what we needed.
Officially your iMac--known as a "tray-loader" for its optical drive type--can go to Panther (10.3.X). Panther is quite better than Jaguar (10.2.8) that you now have. You probably need more RAM than 160MB for even Jaguar. I feel that 384MB is about min for that OS.
The big problem is that the early iMacs came with painfully small hard drives --4 to 6 G--and OSX need a lot of free space on the disk for efficient performance. It's hard to keep a Jaguar system under 2G with a few useful apps installed.
Bottom line: you'll spent money for a hard-to-find retail OS install disk, more RAM, and a bigger hard drive, and you'll still have a slow computer that will always struggle with modern web pages. If you want to upgrade and experiment as a hobby or learnign experience and you can afford the parts and time, by all means--go for it. However, if cost is an issue, throwing money at this unit is not cost-effective in terms of how much more yo ucan get from it.

Similar Messages

HT3910 Restore old Mac using Mac OS X Snow Leopard Install DVD

When I try to restore my old Mac, which I am preparing to sell, using the Mac OS X Snow Leopard Install DVD (OS X 10.6.8), I hear the optical disc drive spin up and down, then the disc is ejected. This is the same thing that happens with its original OS X Install DVD, which was OS X 10.4.9.

When I try to restore my old Mac, which I am preparing to sell, using the Mac OS X Snow Leopard Install DVD (OS X 10.6.8), I hear the optical disc drive spin up and down, then the disc is ejected. This is the same thing that happens with its original OS X Install DVD, which was OS X 10.4.9.

Text messages in Safari are garbled on Mac Pro after Snow Leopard install

When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
Message was edited by: Attila Szegedi

MAC OS X Snow Leopard install disk won't install "with this version"

I am trying to get ready for the Snow Leopard install disk to migrate from Mobile Me to ICloud. However, the disk install I received to start the process won't allow me to install saying I have the incorrect version to do so. I am up to date in all my software installs. What am I doing wrong?
Thanks!

If you have an iMac running 10.7.4 as it says in your profile, why are you installing Snow Leopard? If this is a different computer then it would really, really help to know something about it.

Mac will not boot after Snow Leopard install

I recently had a HD crash. Replaced the HD and installed Snow Leopard from a image file on an external HD. Install went great. I copied over data files and things seems just fine. My first reboot after the install and the Mini won't boot. I am stuck with the Apple Logo and a spinning wheel. I ran disk utility and the new HD checks out fine. When I boot with the external HD, it still sees my Mini HD. I tried restarting with Command/Option/P/R but that didn't do anything. Any advice?

I'm in a slightly similar spot- no crashes, but-- What I want to hopefully do is run my Tiger ppc apps (3) for CAD on my New- 5 weeks old) Lion Factory Installed machine. The ( November) First Aid Issue of Mac Life mentions a way
way to get external boots, UNLESS they are the Factory installed ( Lions). In the meantime----
Johnny

Aperture will not work after snow leopard instalation,

Hi,
I have avoided upgrading to Snow Leopard but my children bought me the upgrade for Christmas as they want me to use Face Time. So I did, now aperture will not open and it says contact the originators of the program. I am a pro photographer and all my current work is on Aperture and I have a wedding in two days time and so this is somewhat disturbing as all my post production in done in Aperture. Can anyone help me I have done all the software upgrades etc.....

Are your images files managed in the Aperture Library, or Referenced? Do you have an external disk drive in the configuration, and if so, is it formatted as Mac OS Extended?
If you hold down the Option key while clicking on the Aperture Icon in the Dock, do you get the dialogue that allows choosing between different Aperture Libraries, or even creating a New Library?
Ernie

Epson RX595 will not print since Snow Leopard install

I cannot get my trusty Epson to print since installing Snow Leopard and latest printer drivers.
I can scan. Just cannot print.
I have looked at some troubleshooting support articles. Does anyone have a good link, tip?
Thanks in advance for any help with this!

Try deleting the printer, the <hard drive>/Library/Printers/EPSON folder and the /Library/Caches/Epson folder, and then reinstalling the drivers using Software Update. Then add the printer, making sure that you are using the Epson driver, not the Gutenprint driver.

Safari will not work after Snow Leopard Install

Safari does not work. It opens briefly, then closes. I get a message to "click reopen to open application again," but the same thing happens. Please advise.

Janice,
Quit Safari if it's open.
Locate this file. com.apple.safari.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Desktop.
Launch Safari. If it launches without crashing, then that .plist file is corrupted. Drag it to the Trash, empty the Trash and restart your Mac.
If Safari still crashes...
Go to ~/Library/Caches/Safari and delete all the sub-folders within that one.
Go to /Users/YourName/Library/Safari and delete Home/Library/Safari and delete any of these files you have there:
Downloads.plist
History.plist
LastSession.plist
Carolyn
Message was edited by: Carolyn Samit

Snow Leopard Install Failed on iMac

I have a late 2006 iMac and cannot get SL to install. Every time I try something different I still get the "Could not install the necessary support files" error. Here is what I have tried:
- Clean install of SL on erased drive (including a 7-pass erase), fail.
- Installed Leopard, then upgrade, fail.
- installed Tiger even, then upgrade, fail.
- Thought I had bad DVD, returned it to Apple store, new disk but same problems.
- tried my friend's disk that worked on his MB, failed.
-Per AppleCare rep I reset my SMC and PRAM, tried clean install, failed.
- Hard Drive verification cheks out fone.
- Permissions, fine.
- Apple Care reps now tell me that they are out of ideas and that I should bring it to the store, but I have found that the store "geniuses" are usually NOT that.
The only thing I have not tried is booting from an external drive. Have other iMac users with these problems with SL had success this way? I mean I don't like the fact that anytime I want to reinstall my operating software that I will have to go through this circus.
Any other ideas to try? What has worked for others?
Help!

A 2006 24" iMac should be the same as mine and I installed SL on 2 of them with no problems at all. It's really very weird that you should be having this problem even after reformatting the drive.
Only thing I can think of that might be causing this is hardware problems, most likely the DVD drive is going bad. Or perhaps the motherboard, but I think you would have had many more problems than this if it was the motherboard. You might even have a hard drive going bad, which seems unlikely after doing a 7 pass erase. That will usually isolate any bad blocks.
As someone said you can do a remote install from another Mac if you have one or can get the use of one. You could also try hooking up an external DVD drive and see if that works. Make sure it's firewire, that works much better, but USB 2 should still work if you have no choice. If a remote or external DVD works then it is most likely the the internal DVD.
Kevin

Why cant i install Mac os x snow leopard on my Imac early 2011

I have mac OS x mountain lion and I'm trying to downgrade to snow leopard by making a partition and trying to boot the install dvd that I just got but when I try to boot the install dvd by holding down (c) or doing it in the system preferences > start up disk the apple logo just appears can someone help

There is no Early 2011 iMac. There are Mids and Late. That's it. Mids came with 10.6.6 or 10.6.7. The Late requires 10.7. It's a convoluted process for the Mids, but you can install Snow Leopard on them.
How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
1. Create a new partition on the hard drive.
2. Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard
        system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the
               COMMAND and R keys until the menu screen appears. Alternatively, restart
               the computer and after the chime press and hold down the OPTION key until
               the boot manager screen appears. Select the Recovery HD and click on the
               downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB
flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's
internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
You will need a retail copy of Snow Leopard. If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.

Problems with Booting from the Snow Leopard Install Disc

I need to do a reformat of my iMac drive and reinsall Snow Leopard. Then I want to run System Migration and move the contents of my Mac Pro (running Snow Leopard) over to the iMac.
I placed the retail Snow Leopard installation disc and held the "C" key down during restart. My optical drive make a bit of random noise and eventually ejects the SL disc. I've tried a CD, movie dvd and another software program installation disc and none of them seem to be able to be read. I've sold the Mac Pro and am in a bit of a bind as I need to get this done and shipped out. I'm also going to have to wipe the Mac Pro drives clean and do a reinstall of Snow Leopard.
Can anyone help?
Thanks,
John

Do you have the original install discs that came with the computer?
If you do, try powering up the mac pushing in the disc and hold the OPTION key, which will bring up the start up manager, select the insrall disc to boot from.
After booting, select the language, on the next page go to the menu bar and select Utilities/disk utilities, select your volume (default name is Macintosh HD, or what ever you ma have named it) First aid tab, run verify disk.
If it comes up with errors (they will be in red font) click repair disk. Rerun this till it it comes up with "this disk seems OK i(n green font)
Then quit the installer and eject the disk.
Try the Snow Leopard disk using the same proceedure (power up, push in disk, holding the OPTION key) to boot to the start up manager, and select the SL disk, and do a clean install.
Make sure that you have a retail install disk (white SL on it)
You can try this from the retail SL disc, if you do not have the Original disc(s) you should include all of them to the person you seel/give it to.
After install, follow these instructions.
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Hope this helps

How do I get Snow Leopard free Snow Leopard install DVD so I can upgrade to Lion and then be able to join the Cloud.

How do I get free Snow Leopard install DVD so I can then install LION and move to the Cloud?

Hi Robert,
If you are not a mobileme subscriber you will have to buy Snow Leopard install DVD. It is not free.
Good luck,
Alan

Mac mini and Snow leopard wireless problems

Hi,
I got mac mini running snow leopard to our office from another branch, this is recently brought mac mini with snow leopard installed,
But the problem is I cannot connect to internet using wireless connections. Reading other posts i found out that there is a snow leopard issues with connecting to wireless network, but this problem seems to unique. When i connect to wireless network it shows me that, mac mini is connected to wireless network but doesn't take ip address from dhcp , its show some self assigned ip which is 169.254.226.163, but my network address are 192.168.1.*, ethernet works fines,but in wireless even when i gave manual ip , it connect but i cannot connect to internet neither i can ping to router.
I tried various methods suggests in forms, like deleting network preference files in /Library/Preferences and ~/Library/Preferences and also deleting network connection and adding new one, even updating to 10.6.3 but nothing works for me,
My macbook nicely connected to wireless and get ip, even PC connect nicely this issue is only with Mac mini
Could have suggest me how can i fixed this, Thank you very much,
Best Regards,
Waruna.
Message was edited by: warunacds

Thanks DaddyPaycheck for your initial response. Before I jump onto the phone with Comcast couple of questions that I have for clarification purposes:
1) Are you implying that I must link my blabla.com address to that static IP address through my Domain Provider? See following example:
Record Type Record Host Record Answer TTL
A *.blablat.com >>Static IP<< 300
2) The current IP I have been given 60.172.151.254, why is that not static or how do you know it is not static?
3) When executing the command host in terminal for this IP address it returns the following: c-60-172-151-254.hsdl.co.comcast.net which coincidentally is the same as primary DNS it recommended during the initial configuration of the Mini Server. What does this mean? When I enter this in Safari it results in 'Safari can't connect to server'.
4) Executing the same command for my domain name 'blabla.com' it results in my 'internal' IP address '1.0.10.9'.
Thanks in advance for any clarification you can provide,
Tiest.

Migration assistant update for Mac OS X Snow Leopard

Hello -- I downloaded SNOW LEOPARD successfully that past week. I did a software update as well afterwards.
Now in preparation for upgrading to LION OS X, I read an article that mentions one must make sure to have the MIGRATION ASSISTANT UPDATE for Mac OS X Snow Leopard installed. I am unsure if this was included in the software updates I performed. One would assume it would be there. BUT there is not a detailed listing of what these combination updates include. HOW can I tell if I have the desired version required to continue on to LION?
Another suggestion was for one to perform FIRST AID on the start up disk. It only says to select your Mac HD and then to "verify" ..... do they mean to VERIFY DISK or VERIFY DISK PERMISSIONS. I have on occasion performed a REPAIR DISK PERMISSIONS but not the others mentioned. I do not know what the difference is?
THANK YOU

I have the same console mesages repeating ad-nasium as you do. What is interesting is I do have the StartuoItems directory but it is empty. The problem I have is that the log-in window comes up as normal, but I can not type in it for about 5-8 seconds. This has started after the latest updates which you mention. Don't know if this issue is related or not. Have deleted the loginwindows and loginitems preferences to no effect.

PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

krystiefrommorayfield wrote:
I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
You connect your iPhone to iTunes through the Sync Process...
See Here
Syncing with iTunes
From Here
http://www.apple.com/support/iphone/syncing/
http://www.apple.com/support/iphone/

Will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?

Similar Messages

Maybe you are looking for