Will mac pro and monitors ordered together ship at the same time?

Will Mac Pro and Thunderbolt monitors, if ordered together, ship at the same time? Or will they ship the in-stock monitors now initiating the Applecare start date for the whole order even though the Mac Pro is not expected to ship until sometime in March?

I ordered the new Mac Pro (model 6.1) on December 18, 2013 along with a 27 in. Apple thunderbolt display. The fully maxxed out new Mac pro shipped on January 8, 2014 and arrived January 13, 2014. My Thunderbolt display shipped within 1-2 days of placing the order, i.e. the week of December 18th and arrived before Christmas. A few days after receivng my new Mac Pro, I received the Apple Care paperwork and both the new Mac Pro and the Apple Thunderbolt display were listed with a start date of January 7, 2014, i.e. the day that my new Mac {ro was prepared for shipment -- not the day my thunderbolt display was shipped.
Tom

Similar Messages

HT4437 Can't get iTunes and monitor mirroring to work at the same time.

When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
Ak

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

Mac Pro turns itself on every day at the same time

My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
I have had it since April and it has never done this before. It did NOT do this under 10.4.
I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
Any ideas?
Here is the console log from yesterday. It pretty much looks the same every day.
Log file:
Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 18 18:00:16 localhost kernel[0]: PAE enabled
Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 18 18:00:17 localhost kernel[0]: mbinit: done
Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
Nov 18 18:00:17: --- last message repeated 4 times ---
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.

Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
Doug

HT4796 Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

70 hours... no, it's not normal but it can't hurt your Mac to be running for that amount of time.
Try this support article > OS X Mavericks: Transfer your info from a PC

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

i am sorry, guys, but I really really really need you guys' help. if u know ANYTHING...

A few days ago i ordered applecare for my iphone 5 at sprint. i bought it along with my iphone at the same time. is it supposed to ship at the same time or is the applecare gonna ship a few days later? i already got my iphone but no applecare ! i called

i got apple care + a few days ago with a iphone 5 at sprint. are they suppost to ship at the same time? i got my iphone first and i havnt gotten mt applecare+ yet. is it a package or just a email? i called people at sprint and some of them said it was just an email.

UPDATE: I did receive the following 2 items in the mail today regarding my Apple Care +:
1.) Two (2) purchase invoices for Apple Care + on our new iPhone 5s. One for my iPhone 5 and one for my wife's iPhone 5.
2.) Two (2) certificates (e.g. a contract) detailing the terms & conditions of the Apple Care + coverage on our iPhone 5s including all the phone numbers for each individual state in the USA that has exemptions/exceptions.
The only phone number provided for the award winning teams is the only they always provide:
1-800-APL-CARE (800-275-2273)

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Sorry...downgrading is not supported.

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

That's not what home sharing is for or how it works.
You want the remote app.

Will my whole itunes library be transferred to my new computer with home sharing,in other words will I be able to use bothe computers at the same time ? And will I have two copies of my all my playlists?

Will my whole itunes library be transferred to my new computer with home sharing,in other words will I be able to use bothe computers at the same time ? And will I have two copies of my all my playlists?

Hi there J1750oe,
You may find the information in the article below helpful.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Transferring playlists
If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library > Import Playlist. The import process will remove any items from the playlists that you didn't share via Home Sharing.
-Griff W.

I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
GB

SCXI 1112 and 1302 doesn't run at the same time

Hi,
I have SCXI 1112 thermocouple input module, SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
Could you please give me some advice to solve this problem?
Thanks,
Azra

One piece of the puzzle you left out is the DAQ card being used in the host computer.
Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module. Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ.
I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis. Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
Hope this might help.
RS

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

New IPhone and Ipad air are ringing at the same time...

New IPhone and Ipad air are ringing at the same time, from incoming landline/mobile phones. Help please...

That's a new feature introduced in iOS 8 called Handoff. You can start something on your iPhone and finish it on your iPad or Mac. You can make the iPad stop ringing by going to Settings>FaceTime on the iPhone and toggling off iPhone Mobile Calls. You can do it on the iPad also.

Will mac pro and monitors ordered together ship at the same time?

Similar Messages

Maybe you are looking for