Will magic mouse and wireless keyboard work with my G4?

hello, i have a 1.25 Ghz ppc g4 imac and have leopard installed. i was wondering if i get a bluetooth dongle and a magic mouse and wireless keyboard would it work? would i also need a special kind of bluetooth adapter? i already have airport extreme, im going for the modern mac one wire (power cord) look. thank you.

According to this on the Apple Store:
http://store.apple.com/us/product/MB829LL/A?fnode=MTY1NDA1Mg
the Magic Mouse requires at least OS 10.5.8 whcih you don't have.
The current wireless keyboard requires 10.6 which cannot run on a G4 iMac.
I would look to third-party solutions. I like Logitech input devices:
http://www.logitech.com/en-us/home
However, even the Logitech devicez may require a higher version of the Mac OS than you have. Be certain to check system requirements very closely before buying something.

Similar Messages

  • I would like to AirPlay mirror my iMac and be able to use both my magic mouse and wireless keyboard, but the bluetooth range won't let me. Is there a way to extended its range?

    I am buying an iMac to AirPlay mirror on my big screen TV with AppleTV (2nd generation). But my TV is located far away from my iMac and I won't be able to use my magic mouse or wireless keyboard via bluetooth connection. I know I can use an app to simulate both mouse and keyboard, but I really need to use the actual devices.  
    I wish there was a way to pair them to my iPad or iPhone, via bluetooth, and control my iMac via network. It is a cheap solution, as I wouldn't need to buy any other device. I believe all these devices, without modifications, have enough technology to be able to work as I've imagined. The only need was to adapt the software.
    Is there a solution simple as this one, or do I have to buy a Bluetooth extender in order to use my magic mouse and wireless keyboard? If so, which BT extender do you suggest and what is its range?
    Thank you!

    If you are still under warranty, contact Apple to get it serviced. You can also visit an Apple Store or Authorized Apple Service Provider to get it looked at.
    iPhone - Contact Support - Apple Support

  • Problems with magic mouse and wireless keyboard at the same time

    I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and  i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
    What do you think about rarely issue?
    Thanks.

    Hello:
    Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
    Barry

  • I have a question about the new Magic mouse and wireless keyboard.

    Just wondering. My computer is in my kitchen, against a wall, and connected to my t.v. directly on the other side of this wall in my living room. My question is this, can I use the wireless mouse and keyboard with the computer in the living room, through the wall, while mirroring the screens? Hope this makes sense. In other words, will the magic mouse and keyboard have the strength of range to connect through the wall. Thanks.

    It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
    If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

  • Been losing connection for magic mouse and wireless keyboard

    When I have my MBP running Mavericks in clamshell mode, I lose connections to both magic mouse and apple wireless keyboard in clamshell mode. I've tried all the PRAM SCM, aluminum foil and paper tricks. What I then did was test what happens when I leave the MBP open rather than in clamshell mode and it appears to avoid losing connection, at least that is what I've concluded with Mavericks for now..... anyone else able to replicate this? Having to leave the MBP open is not ideal.

    Barry, thanks, still not working.  I've tried every thing I can think of or have read, what I'm concluding is that there is either a problem with Mavericks or something has changed on how bluetooth works in Mavericks. Did not have this problem for the last 4 years. I can reproduce the problem when I close the laptop. I had the Bluetooth and wireless card checked out and replaced about 3 weeks ago. Problem has continued.

  • Magic Mouse and Wireless Keyboard: Should charge off iMac

    Apple, you've been shipping Bluetooth peripherals that require disposable batteries for years. It's time to design long-lasting rechargeable batteries into these devices.
    Years ago I open-lettered the idea of designing Apple's BT devices with built-in rechargeable batteries. The basic idea consists of a USB cable that is used periodically to connect to the CPU and to the devices. The devices would have a red and green light that become visible when depleted or charged respectively. When the devices require a charge, the USB cable is connected to the iMac and then to the device. The USB cable is put away once the green light indicates a full charge.
    No visual clutter, no batteries to dump into the landfill.
    While I'm not a rabid environmentalist, the fact that Apple is speaking openly about it's accomplishments in this area (http://www.apple.com/macbookpro/environment.html), while at the same time shipping a Mac that requires disposable batteries is a bit of a letdown to this longtime Mac buyer (since 1986).
    Throwaway batteries are unnecessary.
    The technology exists to include a long life built-in rechargeable battery. A USB charging cable, used as described above, would not clutter Apple's design intentions for the new iMacs. Instead, it would strengthen Apple's Green Design goals.
    Apple has had years to noodle out such a feature. In my opinion, there's no excuse for this oversight.

    Hi Chillspike. In response to your comment, +"Is one or two wires (keyboard & mouse) too much clutter for people?..."+
    Not all of us have a lot of computer space. My iMac is on a small table along with my TV, cable box, DVD player, etc. I have a rats nest of wires in the back, including my internet receiver, USBs for my iPod, wireless keyboard, and wireless trackball, a backup hard drive, and my printer (I have to switch something else out in order to plug it in). I might sit on the edge of my bed and put the keyboard in my lap, although I usually stretch out in bed a few feet away to work.
    I had a wired keyboard and trackball a while ago, and nearly pulled the computer off the table a couple of times as I was trying to get settled in! So going wireless is as much a matter of practicality for some of us, as your preference for hard wiring is for you. If you prefer being wired, I hope someone comes up with a product that meets your needs - and maybe by the time they do they will have the "bugs" worked out of this new one.

  • Why is the battery charger for the magic mouse and wireless keyboard not included in the package when I bought my iMac?

    I was not given a choice or let known that I would receive wireless keyboard and mouse that requires charging. If I had known earlier I would have asked for non-wireless devices or bought the charger on spot.
    The charger should've been a given and not be considered as a separate accessory that requires to be bought. This is the same as having bought an iPhone but not given the charger.
    I am very disappointed with Apple regarding this matter. I hope it'll be resolved soon.

    Oh, okay now I see where you're coming from. Sorry, I didn't know that they provided us with non-rechargeable batteries instead.
    Well in that case, they should've provided us with rechargeable batteries instead of the alkaline ones. I mean, the sole purpose of having wireless mouse/keyboard is the purpose of convenience. Having to replace the batteries (that don't last very long from my experience) does not seem convenient to me.
    What's more, by providing users with non-rechargeable batteries is not an environmentally friendly choice as this results in an increase in disposal of hazardous waste. I'm bringing this environmental issue up because they have an environmental policy in their company, and on their website they talk about their environmental resposibilities which is quite contradicting as shown in their actions, don't you think?

  • TS3048 My wireless mouse often loses connection. I replace batteries and it works for a few days before becoming problematic again. Battery currently shows 100% and connection is lost intermittently. Bluetooth is on and wireless keyboard works. Any sugges

    My wireless mouse often loses connection. I replace batteries and it works for a few days before becoming problematic again. Battery currently shows 100% and connection is lost intermittently. Bluetooth is on and wireless keyboard works. Any suggestions?

    Is it possible that you have a bad bunch of batteries?
    My Magic Mouse on one computer and the Mighty Mouse on another use batteries I bought through the Apple store (with a charger). They last a long time.
    http://store.apple.com/us/product/MC500LL/A/apple-battery-charger
    Another possiblity is that the mouse is defective. Since the keyboard connects, it has to be the mouse or the batteries.

  • Does magic mouse track pad functions work with OSX10.5.8?

    Does the Magic Mouse track pad function work with OSX 10.5.8? Or do I need updated software to use all of the functions?

    The Magic Mouse system requirements:
    Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
    The Magic Trackpad requires 10.6.4 or later.

  • Magic mouse and trackpad not working

    All of a sudden my magic mouse and trackpad stopped working.
    I tried everything, preferences, bluetooth config, but nothing works.
    Sometimes in the mouse prefpane, I get the message that the mouse is connected, then after a few seconds  it shows disconnected.
    In Bluetooth config I get the message that the mouse is connected but the wheel keeps spinning and then it says "connection failed. software configuration and bluetooth may be invalid or are not supported".
    Same for the trackpad.
    My second mac is also seen, and "connected ?" , but when I try to open the connection it fails also.
    System is lion 10.7.5. imac 3,6 Ghz corei5 from 2011.

    Found out myself how to solve the problem.
    Simply resetting the PRAM and everything was ok.
    Thanks anyway

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP

    NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
    I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
    1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
    2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
    3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
    4. Double-click the "Bluetooth Support Service" to open the properties.
    5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
    6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
    7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
    8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
    9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
    10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
    11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
    12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
    Best of luck.

    It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
    If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

  • Magic Trackpad and Logitech keyboard hangs with Mavericks

    Since updating to Mavericks, both my Logitech keyboard (DiNovo) and Magic Trackpad hang when chaning from one window to the next. I've reinstalled the latest drivers from Logitech, but that did not have any affect on the problem. Am I alone?

    I had the same problem.  I had the DiNovo and the Magic Mouse connected to my iMac.  After the upgrade to Maverics, both devices would hang frequently (both when I selected to a new window and otherwise).
    I got fed up and installed a USB keyboard, decommissioning the DiNovo.  I would have put away the Magic Mouse too, but I couldn't find my USB mouse.
    Funny thing is, after I removed the DiNovo, the Magic Mouse seems to be working fine.

  • Will Magic Mouse and Trackpad Support Multitouch Gestures On Lion

    Will the Apple Magic Mouse and Trackpad support Multitouch gestures on Lion?

    Try this page.
    It will tell you which gestures are available with Trackpad and Magic Mouse respectively.
    Hope this helps.
    Regards
    Paul
    http://support.apple.com/kb/HT4721

  • HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

    How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

    Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

Maybe you are looking for

  • Adobe Acrobat X Pro - Online-Hilfe öffnet nicht

    Hallo zusammen, wir haben aktuell das Problem, dass sich bei einem Kunden die Online-Hilfe nicht öffnen lässt. nach ca. 1 Minute Wartezeit erscheint die Fehlermeldung: "Online-Hilfeinhalt kann nicht angezeigt werden. Vergewissern Sie sich, dass Sie I

  • ***?? xp not connecting to wifi either!?

    im using an AirPort Extreme Basestation firmware 7.2.1 (Gigabit Ethernet) purchased August 2007 Issue is Iam using an imac & a PC computer to connect via WiFi. My imac has xp on a bootcamp partition. and the pc is running the same exactt version aswe

  • RSS count on Mail dock icon

    Pretty simple really, I want the RSS count to appear on my mail dock icon. here is the catch though. I know you can achieve this by selecting the "Show in Inbox" option for each feed, but then I end up with a huge list of RSS feeds in my Inbox sectio

  • Automatic status "Completed" on tasks where phase has been completed

    Hi experts, I am wondering if there is any way (apart from developing a custom workflow) of setting all tasks below a phase as completed when the phase is completed. Thanks in advance. Kind regards, Neil

  • Can't See Flash Paper Document

    First, my appologies if this has been mentioned before. I couldn't find it so I posting it. I just installed Flash Paper2. Converted a Word document to PDF and draged it to Flash Paper2's window. It loaded fine. I then saved it as a SWF. It looks gre