Will MainStage 3 work with logic pro 9

Hi
Will i be able to use Mainstage 3 with Logic Pro 9. I intend to use it for playing guitar over backing tracks made within Logic Pro 9. Also is latency a problem. I have 2.5GHz quad core I5 MacBook Pro with 4Gig RAM.

You shouldn't have latency problems if you have it set up properly. I can run both programs simultaneously on a 2009 dual core 2.4 MacBook Pro with 6 GB Ram. I would consider upgrading your RAM. You may want to try using the Playback plugin in Mainastage 3 for playing back your mixed down tracks. Then you would only need to run Mainstage by itself live.

Similar Messages

01v96i Yamaha...will it work with logic pro X

I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Do you know if the Digidesign 192 will work with Logic Pro X?

Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
Thanks

it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
Best
Steve

Will the Tascam FW-1884 work with Logic Pro X?

Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford Rome

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Will a Mackie Control Universal V.2.1.2 work with Logic Pro 9?

Will a Mackie Universal Controller V. 1.2.1 work with Logic Pro 9?

Mine does. There was something If I can remember how to do it about after the update selecting the controller to mackie controller. You have the option within the controller itself to be mackie controller or logic controller. If it powers up and says mackie controller, You should be fine. If you have a problem get back to me, Ill look for the link that tells you how to change it.

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

I bought logic studio with compressor 3.5 what happens if I buy compressor 4.0, will it work with Logic? should I get a free upgrade since I bought it recently?

I bought logic studio with compressor 3.5 what happens if I buy compressor 4.0, will it work with Logic? should I get a free upgrade since I bought it recently?

I don't see any problems but I haven't used it a lot.

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Which MIDI keyboards work with Logic Pro x and Yosimite?

can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Will my Kurzweil PC3 work with Logic Pro 9?

I spent months looking for the right keyboard--what I mean by 'right' is one that I felt sounded best. I ended up with a Kurzweil PC3.
Before I purchase Logic Pro 9, does anyone know if I can use the sounds on board (Kurzweil objects) with Logic Pro 9, instead of using the built-in sounds (objects) in Logic Pro 9? If so, how does one do it? I don't want to use this beautiful keyboard as just a MIDI controller.

My own setup is similar to your discussion. I use a Native Instrument Komplete 6 audio unit as the interface for both midi and audio into and out of Logic Pro 9.1.8. You can set up a Multi-channel instrument in the Logic environment, or use the External Instrument plug-in. In any case, there is a fair learning curve to get this right, but the multi-instrument in the environment is completely capable of controlling the PC3 if you set up the correct Bank change and program change messages. There is one major problem that I am having and that is using PC3 Setup mode. If you set the PC3 into Setup mode and hit some notes, it produces a midi-feedback loop between Logic and the synth, causing the PC3 to go insane if you are connected using the USB port. This is because the midi out from the PC3 is sent thru the Logic track and back out to the PC3 causing a midi feedback loop. In program mode it isn't as bad but does cause a small amount of delay echo. The only way I have got around this so far is to connect using midi cables instead of USB then when recording I disconnect the cable from the Komplete 6 to the PC3 midi in, leaving only the midi cable from the PC3 out to the Komplete for recording to Logic (while monitoring what I am playing via the PC3 audio outputs). Then when I want Logic Pro to drive the PC3, I disconnect the midi in to Komplete and reconnect the midi out to the PC3. Playing the recorded Logic track now drives the PC3 without any feedback. But, there has got to be a better way! Any ideas would be appreciated.
I think this result is because Logic always sends midi notes thru to midi output. Is there some way of preventing this?

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

Preamps/comp working with logic pro 7

Ther is so much to choose from in the preamp/comp world.I have looked at focusrite,and joemeek.My spending limit is around $700.Im looking for a all in one unit(preamp/comp,with an optical out.Im welcome to any ideas,Im getting a G5,with logic pro 7.Right now i have a G4 laptop,with a firewire 410 from m-audio,Thanks Derek
powerbook g4/powermac G4 dual 1.25Ghz Mac OS 9.2.x Logic audio platinum 4.8.1/Logic pro 6

your preamp/comp has nothing to do with logic pro 7, they will all work, there are probably better places to ask for help with this kind of question, such as gearslutz.com

Does mainstage work with logic express 9

hi , do all the features and plug-ins work with logic express 9 or are some features disabled .
or are they not compatible at all
thanks

I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
GOOD LUCK EVERYONE.

Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8. I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it. Thanks for your help.

Thanks so much for your help, Michael. Glad to hear it works for you. This gives me enough confidence to go ahead and order the App. Thanks again.

Will MainStage 3 work with logic pro 9

Similar Messages

Maybe you are looking for