Will maps work without phone or 3G signal....

If I preload a route will maps still work even if I lose phone/3G signal? Stupid question I think, but I just want to make sure before I set off on a long journey which I know will be pants for phone signal. Thanks

Keep wifi and the mobile radio turned on and you should be good.
Location services needs those active to figure out the location without a nearby tower.
Also, Google Maps lets you save map areas for offline usage.

Similar Messages

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

Will Xserve work without a rack?

Before I get all these rants about how stupid this question is let me preface it with a short story:
The owner of my company wants a new server. He asked me which I thought was better: tower or rack mount. I said that the PowerMac doesn't have the service warranty we would expect from a server, and as a desktop, is not really designed to run 24/7 the same way Xserve is. So we configured a new Xserve and it is in the process of being made. He then asked me the question: "will it work without a rack?" Being honest, I said "It would power on, but it's not recommended to run that way because it can't cool properly and it's not physically secure."
Now he tells me we aren't ordering a rack for this $6000 server. Can you please list all the reasons this is NOT going to work, so I can go back to him with a huge rebuttal? It just doesn't seem logical to me to not spend a few hundred dollars to properly secure this very expensive piece of equipment, and I don't have any fight left in me to come up with all the answers on my own.
PowerBook G4 12" 1.5GHz Mac OS X (10.4.7) 5th Gen iPod Video, 1st Gen iPod Nano

He then asked me
the question: "will it work without a rack?" Being
honest, I said "It would power on, but it's not
recommended to run that way because it can't cool
properly and it's not physically secure."
Speaking from my limited experience (18 months) with our Xserve G5: The Xserve does not need top and bottom venting; it cools front to back. A risk, though, will be that it gets shoved back against a wall and thus has poor airflow out the back, and you don't realize until you have done it what a mess of cables comes out the back and why you need the cable management arm (as aggravating as it is when you first use one) to manage the cables.
The Xserve is heavy. It's difficult to walk away with one. The enclosure lock will still work without a rack, but it's not real security anyway, just protection against the drives being bumped out by accident. But an unracked Xserve will be prone to injury and falling off a table, etc. They are BIG and HEAVY. The Intel Xserve is even longer than the Xserve G5 (look at the dimensions).
If the concern is the expense, well, you can build your own rack rather cheaply. I suggest Starcase (http://www.starcase.com), which lets you build a rack of any dimensions - you will probably want at least a 3U or 4U rack for your Xserve - 1U for the Xserve, 1U for a UPS (APC has a nice 1U 1000W UPS and a same-size 750W UPS), 1U for a tape drive and autoloader (you will need to back up all that data), and you might need another few rack units of height. The nice thing about the Starcase rack solution is that, as your rack height needs expand, you can simply get the four corner posts of greater height and grow your rack. Starcase also has side panels, top panels, etc. For custom-height solutions (rather than their pre-bundled standard sizes), see:
http://www.starcase.com/customsteel_rackstore.htm
Check the Starcase prices so you can present your boss with a true picture of the cost. They are built like a tank. I STRONGLY advise that you put your Xserve in a rack; otherwise, it will be very difficult to service when the time comes - and you WILL need service, eventually.
However, note that the Xserve is NOISY. If the Xserve is going to be in an office environment, you will need an acoustical enclosure, such as the XRack Pro. See:
http://www.xrackpro.com/
Very nice, very quiet, and a bit pricy.
Hope this helps.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

same thing happened to my S5. We're beyond frustrated.

URGENT: Sorry, Expander will not work without the Stuffit Engine...

hallo,
I want to watch a show of myself on Time Warner Cable TODAY live ONLINE while being in Europe, so it is urgent:
sometimes when I try to install a software I get the following error message:
'Sorry, Expander will not work without the Stuffit Engine. Please reinstall the original installer.'
Just now I wanted to install 'Windows Media Player 9 for Mac OS X' and got that error message. Any suggestions?
THANKS YOU!
1 GHz PowerPC G4 (3.3) Mac OS X (10.4.7)

"Any suggestions? "
Obviously you need to reinstall Stuffit Expander. Download it from Stuffit.com.
Also, forget about Windows Media Player. It's out dated, and not even made anymore. Download the free Flip4Mac QuickTime plugin from Flip4Mac.com
Hope that was urgent enough...

Cannot type the letter "t" when phone is in portrait orientation. will only work when phone is in landscape.

cannot type the letter "t" when phone is in portrait orientation. will only work when phone is in landscape.This causes some problems as some apps do not change orientation so when the "t" is needed to be entered it cannot be carried out

Try the basic troublshooting steps described in the User Guide, Appendix B: Resart, Reset, Restore using backup, Restore as new.

The pop-up will not work without locking up

Adobe Muse does not work with the Swedish version in Windows 7. The pop-up will not work without locking up.
I have tried by changing the screen resolutions but the problem continues. What to do?

When I try to delete a page in design mode freezes the program.
It is not possible to change tools in the toolbox.

My Ipod 4th gen will not work without the charger.

My ipod nano 4th gen will not work without the charger.

How much it costs depends on who you have replace the battery whether that be Apple or a 3rd party repair company. Here are Apple's prices.
http://www.apple.com/support/ipod/service/prices/
It would likely be much cheaper to have a 3rd party company do it instead. One company I have heard a lot of good things about is iResq. For others, do a simple Google search for "iPod battery repair" and you should get a plethora of results.
http://www.iresq.com/
I don't believe Radio Shack does offer that service. Sorry.
B-rock

Will tethering work without tethering "option"?

Will tethering on iPhone 4 work without the more expensive tethering "option" from AT&T?
Isn't it just a cable from the phone to your iMac that does the trick?
I don't have an iPhone yet, just wondering...
Thanks.

Tethering is a carrier feature and the option to tether will only appear in settings if your carrier supports tethering. Carriers charge for the use of this feature & yes, AT&T charges accordingly. You can tether either by bluetooth or USB cable. So no, its not a simple matter of connecting a cable. You first have to sign up for tethering.

Apple Mail will not work without webmail login

Spontaneously 2 weeks ago I got a triangle next to my Apple Mail Inbox and could neither send nor receive email. I have used ATT for DSL and my email address for over two years without this problem. I have checked all my settings with ATT and they claim they have even "rebuilt" my mailbox and all is good. But unless I use a browser to log into webmail first, Mail will not work. The user name/password/port info is all correct, but Mail cannot connect. Even when the "keep me logged in" box is checked when I log in to webmail, Mail will stop working if I close out the browser and put the computer to sleep. This is driving me crazy.

I've had what sounds very similar issue with another DSL ISP: Qwest.
Ran both Comcast & Qwest simultaneously (alternately, not really concurrently)
for awhile & got sporadic blips & failures to connect.
I never could establish conclusively whether it was the ISP, or a local client problem.
I think its the ISP. Had other email annoyances with them that never quite got resolved
Sometimes my mail was left on the webmail server & never got delivered & would do so, same as you describe.
Its never anyone's fault, or problem...
I doubt they'd tell you if it was an issue on their end, if it not resolved.

Premiere cs5 mercury engine will it work without any graphic card?

HI there I have core 2quad 6600 processor of 2.4ghz, and intel classic series fb33 motherboard, with only onboard video ram shared with physical ram of 2gb.
I want to install cs5 on 64bit OS and upgrade total ram to 8 gb without buying any graphic cards(right now). Qn is will I be able to edit avchd videos? will the
mercury engine still be enabled? I know its kinda "no budget, want all qn" Right now I dont wanna buy a card as am plannin to buy new system later..
Thanks
Gigarigh

Yes, of course, you are correct, Harm. I was over-simplifying.
I Took the OP's "enabled" to really mean "accelerated", and in that sense, it will not work as without the necessary graphics card there will be no acceleration.
I can certainly support your third paragraph, having just moved from a four-year-old system with a quad 3 GHz processor, 8 GB of RAM and a hacked 460 GTX graphics card, to a Sandy Bridge E system with a 3930 CPU, 32 GB of RAM but the same graphics card and HDD set up (for the moment). Your oft stated "molasses in winter" describes my old system pretty well from my present viewpoint!
The old system coped with the fairly gentle HDV, provided I kept the number of assets down, but threw a hissy fit if I tried 1920 HD, even with the Matrox (I know, I know!) I-frame codec.
Gigarigh,
You would be better off upgrading along my path - motherboard and processor first, using as much as you can of your old system for now, as this allows much better scope for future upgrading.

Iphone 3 fully charged will not work without charger now what

My iphone won't work without charger, it is fully charged Apple logo keeps appearing then the phone turns off. Does anyone have an idea what to do, lost without it

If it is recognized by a computer, try restoring:
http://support.apple.com/kb/HT1414
If it is not or restoring does not help, you have obvious hardware damage - at least to the lock button, and possibly the screen gave out. Have it looked at by the Apple Store Genius Bar: http://apple.com/retail/geniusbar.

My ringtone will not work, the phone just vibrates when receiving calls.

I just got a new Iphone5s today and my ringtone will not work. The phone just vibrates when receiving calls. How can I get my ringtone to work?

In addition, the most basic troubleshooting is to restart/reset/restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

Will iCloud work without OSX Lion?

Will iCloud work only with OSX Lion? I cannot use Lion on my G4 Powerbook, and Mobile Me is going away in a few months, so does this mean that only my newer devices will work with iCloud?

That's correct. You can access mail on iCloud by entering the settings in your Mail application, but you have to have a Mac with 10.7.2 or an iOS device to set the account up in the first place, and the other facilities won't work.

Will maps work without phone or 3G signal....

Similar Messages

Maybe you are looking for