Will me 2006 iMAC run FCPX after upgrades?

I have a late 2006 iMac running osx 10.7.3 with 2.16 ghz core 2 duo, 3gb 667mhz ddr2 sram and an ATI radeon x1600 128mb.
I am looking to put FCPX on it. I lost FCP7 when i upgraded the OS but I have moved to FCPX on my new iMAC. I am wanting to use the old iMAC for a secondary computer. Will this run FCPX?

Unfortunately, no. The graphics card is not supported.
http://support.apple.com/kb/HT4664

Similar Messages

Why is my iMac running slow after upgrading to Mavericks

I have an iMac27 that up until I upgraded to Mavericks ran quite fast. Now applications take much longer to open. When the computer comes out of sleep mode it takes from 30 seconds to a minute to open. All I have is a very dim grey screen and the only thing I can see is the mouse cursor. I have checked Memory and disk space and nothing seems to be wrong using the activity monitor. CPU 50 - 70% idle, Memory Physical 4.GB 3.97 GB used 7.07 Virtual, Memory pressure in the green, App Memory 1.47 GB, File cache 272.2 MB, Wired memory 620.5 MB, Compressed 1.63 GB. Disk space 999.35GB capacity, 441.85 available. When I did install Mavericks it did come back with a disk error. Then it loaded fine. I ran the disk utility and it found and repaired the problem. Running it successive times since have shown no issues.
Thanks

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

Using 2006 iMac running Mac OS 10.6.8.
My iTunes App (11.3.1) will not launch.
Upgraded to iTunes (11.4) but problem persists.
Need help.

I have no answers for ya, but I do have the same problem, so we are not alone in this.
My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
Any thoughts?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Can my 2006 iMac running OSX 10.4.11 be upgraded to move my stuff to the cloud? stuff to the cloud?

Can my 2006 iMac running OS X 10.4.11 be upgraded to move my stuff to the cloud?

Hi..
Sorry but no. iCloud requires a Mac running v10.7.2.
Read here > Apple - iCloud - Learn how to set up iCloud on all your devices
If your Mac meets Lion's requirements:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
You may be able to upgrade your Mac to Lion.
Read here > Lion upgrade questions: Apple Support Communities

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt

2006 iMac running OS10.7.5 with File Vault problem stops boot up?

2006 iMac running OS10.7.5 with File Vault problem stops boot up? Upon login this message appears: Your home folder, which is protected by File Vault, didn't open. it needs to be repaired.
It then asks: To repair the folder and continue logging in press OK. To log in as a different user, click Cancel login.
Clicking Ok
You are unable to log in to the user account "xxxxxxxxxxx" at this time.
Logging in to this account failed because an error occurred.
When I click cancel to log in as different user I get he following message: You are unable to log in to the user account "xxxxxxxxxxx" at this time.
Logging in to this account failed because an error occurred.

This condition is quite difficult and time-consuming to recover from. If the procedure suggested here is too complicated for your experience level, get help from someone more experienced. One option is to make a "Genius" appointment at an Apple Store. Legacy FileVault should not be used under OS X 10.7 or later.
If you have another user account with administrator status and can do so, log in to it and skip to Step 4.
Step 1
Boot into Recovery mode. The OS X Utilities screen will appear.
Step 2
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your boot volume if not already selected. Pull down the menu labeled Select the user account and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
Step 3
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 4 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
Open the Users & Groups preference pane. Create a new user and check the box marked
Allow user to administer this computer
Restart and log in as the new user.
Step 4
Load this web page in Safari.
Triple-click anywhere in the line below to select it:
sudo dscl . -delete users/fubar HomeDirectory
Copy the selected text to the Clipboard (command-C).
Launch the TextEdit application. Paste into the window (command-V). Substitute the short name of the FileVault user for the word "fubar".
Triple-click the edited line and again copy to the Clipboard.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window. When prompted, enter the password of the user you're logged in as.
Step 5
You should now be able to log out and log in as the FileVault user. Your files still won't be available. FileVault is inactive.
Locate the disk image file named "fubar.sparsebundle" or "fubar.sparseimage" at the top level of your home folder. Again, substitute the short user name for "fubar".
Step 6
Try to open the file. If it won't open, try to repair it in Disk Utility. If it still won't open, restore it from your most recent backup. Keep trying older backups until you find one that works. If you don't have a backup, the data is lost, perhaps beyond any hope of recovery. There's a slight chance that you might be able to repair the disk image using an expensive third-party application called "Disk Warrior."
Step 7
Copy the files from the mounted disk image to the corresponding subfolders of your home folder. The Library folder is invisible in the Finder. Open it by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Open the copy on the disk image by selecting
Go ▹ Go to Folder
and entering
/Volumes/fubar/Library
in the text box that opens. Again, substitute the correct name for "fubar".
Log out and log back in.
If there isn't enough disk space available to complete this step, unmount the disk image, copy the disk image file to an external storage device, delete the original, and try again.
Step 8
Back up all data, then delete the disk image file.
Step 9
Delete the user you created in Step 3, if applicable.
Step 10 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user."

My macbook is running slow after upgrading to yosemite

Other's have posted similar experiences by when I ran etrecheck I didn't get a bunch of fails and yet my computer is extremely sluggish since moving from snow leopard to Yosemite. So much so, that I'm considering going back. Programs load slowly and switching between programs has a delayed response. Reminds me of the PC I had before I bought my macbook in 2008.
Any ideas on what might be causing the slow down?
Problem description:
Mac is running slow after upgrading to Yosemite.
EtreCheck version: 2.1.1 (104)
Report generated December 10, 2014 at 10:51:13 AM PST
Hardware Information: ℹ️
MacBook (13-inch, Aluminum, Late 2008) (Verified)
MacBook - model: MacBook5,1
1 2 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
Cinema Display 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:33:11
Disk Information: ℹ️
ST9500420AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (196.94 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS21N
USB Information: ℹ️
Microsoft Microsoft® 2.4GHz Transceiver V1.0
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/StartupItems/Parallels
[not loaded] com.parallels.kext.Pvsvnic (3.0) [Support]
/System/Library/Extensions
[not loaded] com.parallels.kext.ConnectUSB (3.0.0) [Support]
[not loaded] com.parallels.kext.Pvsnet (3.0) [Support]
[not loaded] com.parallels.kext.hypervisor (3.0) [Support]
[not loaded] com.parallels.kext.vmmain (3.0) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Parallels: Path: /Library/StartupItems/Parallels
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
Citations Application (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
iTunesHelper UNKNOWNHidden (missing value)
Time Out Application (/Users/[redacted]/.Trash/Time Out.app)
AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
iTunesHelper UNKNOWN (missing value)
Caffeine Application (/Applications/Caffeine .app)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Garmin ANT Agent Application (/Applications/Garmin ANT Agent.app)
Google Drive Application (/Applications/Google Drive.app)
Stickies Application (/Applications/Stickies.app)
Dropbox Application (/Applications/Dropbox.app)
Box Sync Application (/Applications/Box Sync.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
XPSLauncher Application (/Applications/Xerox/PrintingScout/XPSLauncher.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AmazonMP3DownloaderPlugin1017287: Version: AmazonMP3DownloaderPlugin 1.0.17 [Support]
Google Earth Web Plug-in: Version: 5.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.2.1.11 [Support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
wkDimdimControl: Version: 1.01
DirectorShockwave: Version: 11.6.6r636 [Support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
fbplugin_1_0_3: Version: Unknown [Support]
Move_Media_Player: Version: npmnqmp 071505000006 [Support]
Safari Extensions: ℹ️
Extensions: No such file or directory
3rd Party Preference Panes: ℹ️
BrowserPlus [Support]
Carbonite [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 302.31 GB
Destinations:
Lottia [Local]
Total size: 1.00 TB
Total number of backups: 65
Oldest backup: 2010-12-28 19:41:55 +0000
Last backup: 2014-12-03 21:58:08 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 302.31 GB X 3)
Top Processes by CPU: ℹ️
      70% iPhoto
      20% TOCGenerator
      18% WindowServer
      9% Time Out Break
      6% CarboniteDaemon
Top Processes by Memory: ℹ️
463 MB iPhoto
137 MB Mail
116 MB Google Chrome
106 MB WindowServer
99 MB iTunes
Virtual Memory Information: ℹ️
114 MB Free RAM
1.39 GB Active RAM
1.21 GB Inactive RAM
857 MB Wired RAM
6.24 GB Page-ins
34 MB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 09:18:41 AM Self test - passed
Dec 9, 2014, 03:44:57 PM fontd_2014-12-09-154457_Postelsia.crash
Dec 9, 2014, 12:12:52 PM CarboniteDaemon_2014-12-09-121252_Postelsia.cpu_resource.diag [Details]
Dec 8, 2014, 10:27:45 AM CarboniteDaemon_2014-12-08-102745_Postelsia.cpu_resource.diag [Details]
Dec 7, 2014, 01:04:27 PM CarboniteDaemon_2014-12-07-130427_Postelsia.cpu_resource.diag [Details]

Also resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Upgrading RAM till 8GB could also help the system performance.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
Quit Elements.
Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
Delete the following files from the Preferences folder:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 11 Paths
Adobe Photoshop Elements 11 Settings
Delete this file from the Saved Application State folder:
com.adobe.PhotoshopElements.savedState

Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion

Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion.
Tried opening it multiple ways.
Nothing works.

bfackler,
The iCal application in Mountain Lion has been replaced by "Calendar."
Can you open "Calendar?"

I want to transfer some of the data from an intel 2006 iMac running 10.4.11 to a 2011 iMac running 10.6.8

I want to transfer some of the data from an intel 2006 iMac running 10.4.11 to a 2011 iMac running 10.6.8. What is the best way?

It depends on what you have. The options include:
1. Connect them with a FireWire cable and start up with old iMac with the T key held down.
2. Copy the files over a network.
3. Copy the files to an external drive. Some files require the volume to be formatted as Mac OS Extended.
(117837)

I have a 2006 iMac running Lion 10.75. can I run Airplay Mirroring on this machine

I have a 2006 iMac running Lion 10.75. can I run Airplay Mirroring on this machine

The problem I'm facing is that I cannot make any changes to anything because my home folder is no longer found. I can't even reset it to boot from something other than the installed OS (OS X 10.6.80. Is there any solution to this problem? I have made a USB drive bootable but cannot get the machine to boot off of that either. I am at my wits end. Please help!

My iMac will not wake up from sleep after upgrading to OS X Mavericks

After upgrading to OS X, my iMac will not wake up from sleep. Each time I have to do a hard restart. Is there a fix for this problem?

Hi,
I have just had the same problem with my iMac and after upgrading to Mavericks my iMac would not wake without pressing the power off button and re-booting.
Anyway, I have since done a complete new install on my iMac and have gone 5 days without an issue with the iMac not waking. It was a bit of a pain to do but my own view so far is that the problem is linked to the upgrading of the OS instead of a clean install.
My iMac now flies with a new OS installed instead of an upgrade.

IMac runs hot after Mavericks upgrade

after upgrading from Mountain Lion to Mavericks the machine (mid 2010 IMac 27 inch) runs much hotter than before. I was hoping the power management would rather be better than worse. The upper part of the enclosure get too hot to touch comfortably without excessive load e.g. just some office programs and safari running. This even now in winter time when room temps are only about 20 deg C = 70 deg F. The fans are running higher than before.
As no topics like this are found, a general compatibility issue could most likely be excluded.
What should be checked?

Do 2-3 SMC Resets, or it also may simply be re-indexing Spotlight. Check Spotlight to determine if that is the issue by hitting Command + Spacebar and see if it's reindexing.

Will me 2006 iMAC run FCPX after upgrades?

Similar Messages

Maybe you are looking for