Will migration assistant migrate a boot camp partition?

I am considering replacing my wife's IMac core2duo with a new IMac. Will the current Migration Assistant transfer the full operable boot camp partition to the hard drive of the new computer? If not, what is the easiest way to do this? I do use Carbon Copy Cloner as a back up, in addition to Time Machine. Thank you.

No it don't migrate the BootCamp partition! You can save the partition with WinClone to save and restore the windows partition.

Similar Messages

Migrating a boot camp partition?

I have a Macbook Pro (2GHz core 2 duo) with a cracked screen. I want to migrate pretty much everything to my new Macbook Pro (figured if I was going to spend a lot, I'd get a new computer w/ more memory, etc. instead of dumping money into a computer out of warranty). The problem I'm running into is that I have a Boot Camp/Windows partition on my old computer. How do I move this? Will the partition transfer using migration assistant? Or do I have to migrate my Mac data, re-setup Boot Camp, and try using something like Carbon Copy Cloner to move the windows partition? Tried using Carbon Copy Cloner to just move the Mac partition, but it [the new mac] would not boot after the transfer. Any help would be greatly appreciated

Levi Delson wrote:
I have a Macbook Pro (2GHz core 2 duo) with a cracked screen. I want to migrate pretty much everything to my new Macbook Pro (figured if I was going to spend a lot, I'd get a new computer w/ more memory, etc. instead of dumping money into a computer out of warranty). The problem I'm running into is that I have a Boot Camp/Windows partition on my old computer. How do I move this? Will the partition transfer using migration assistant? Or do I have to migrate my Mac data, re-setup Boot Camp, and try using something like Carbon Copy Cloner to move the windows partition? Tried using Carbon Copy Cloner to just move the Mac partition, but it [the new mac] would not boot after the transfer. Any help would be greatly appreciated
If you use SuperDuper and perform a block to block clone (the target drive has to be larger than the source drive) you will have a clone of everything on your HD - OS-X and Windows.
If the HD on the new machine is larger than the external HD with the clone, you can reclone everything back perfectly.
Hint: make the partition on the external drive intermediate in size to your present internal HD and the new HD size and it should work perfectly.

Windows will not boot to my boot camp partition on a DIY fusion drive - gives "No bootable device found" error

I have a MacBookPro 9,1 (mid-2012, non-retina) running OS X 10.8.2. Here is what I have done to my system:
Installed Windows 7 x64 Pro to a boot camp partition; installed all windows updates.
Using WinClone, save an image of this boot camp partition.
Removed optical drive and HDD.
Installed HDD in place of optical drive.
Installed SSD in place of HDD.
Booted to recovery partition, installed OS X on a flash drive.
Booted to flash drive, created fusion drive using [MacWorld's instructions](http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html)
Booted to recovery partition on flash drive.
Restored system to fusion drive from a Time Machine backup. Unfortunately, it seems that because I never installed OS X on my fusion drive, I do not have a recovery partition. But that's an issue for another day.
Using Boot Camp assistant, created a boot camp partition on my HDD.
Using WinClone, restore my Windows installation from the previously created image.
Now, Windows boots to a black screen telling me that it can't find a bootable device. I have tried a few things to resolve this, all without effect:
I know that VMware Fusion has to prepare a boot camp partition in order to virtualize it, so I figured it might inadvertently fix things. Alas, while it *did* successfully boot my boot camp partition into a virtual machine, I still can't boot into Windows.
I figured I'd just try to reinstall Windows. Surprisingly, my system booted to my Windows install disc, which was in my original optical drive (which I had put in a USB case). But, Windows refused to install, giving me a an error 0x8030024. It seems the solution to this issue is to disconnect all drives but the one on which you want to install Windows, which is something I would dearly like to avoid. It would be a pain, but more than that, I'm afraid it would bork my fusion drive, even if I'm careful to never boot to OS X with the SSD disconnected.
A lot of places said that this error results from a borked MBR, and suggest using a tool like gptfdisk to rewrite it. I followed the instructions [here](https://discussions.apple.com/thread/4144252?start=0&tstart=0), but *that* didn't work either.
I am now completely at a loss as to how to proceed, and Google isn't much help either.
In conclusion, here is some information that you may find helpful:
    $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         239.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         648.4 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                100.9 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Mayfly                 *884.0 GB   disk2
$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 63DC419F-1A09-4C5B-977A-F59F79502CA1
   =========================================================
   Name:         FusionDrive
   Size:         888087773184 B (888.1 GB)
   Free Space:   0 B (0 B)
   |
   +-< Physical Volume B1B14251-2DB3-491C-9E7A-5C2FD11881BA
   |   ----------------------------------------------------
   |   Index:    0
   |   Disk:     disk0s2
   |   Status:   Online
   |   Size:     239713435648 B (239.7 GB)
   |
   +-< Physical Volume D0BA2837-514D-4620-8E1D-26D18137CA94
   |   ----------------------------------------------------
   |   Index:    1
   |   Disk:     disk1s2
   |   Status:   Online
   |   Size:     648374337536 B (648.4 GB)
   |
   +-> Logical Volume Family 736A8900-FE9C-4342-A932-EDC35444774C
       Encryption Status:       Unlocked
       Encryption Type:         None
       Conversion Status:       NoConversion
       Conversion Direction:    -none-
       Has Encrypted Extents:   No
       Fully Secure:            No
       Passphrase Required:     No
       |
       +-> Logical Volume B4997853-59F8-4480-BB48-3481B2F2A123
           Disk:               disk2
           Status:             Online
           Size (Total):       884000030720 B (884.0 GB)
           Size (Converted):   -none-
           Revertible:         No
           LV Name:            Mayfly
           Volume Name:        Mayfly
           Content Hint:       Apple_HFS
$ sudo gpt -r -vv show disk1
Password:
gpt show: disk1: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1465149167
      start        size index contents
          0           1         MBR
          1           1         Pri GPT header
          2          32         Pri GPT table
         34           6
         40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 1266356128      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1266765768     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1268035304         280
1268035584   197111808      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
$ sudo fdisk /dev/disk1
Disk: /dev/disk1     geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 1268035583]     *2: 07 1023 254 63 - 1023 254 63 [1268035584 - 197111808] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

My setup is very similar to your's, Ryan, on a Mac Mini5,2 and the ordering is different and Winclone was not used.
1. New Mini with internal 500GB with Mountain Lion(ML), put into an external FW enclosure, so the Mini can/could be booted using an external drive for contigency.
2. Replaced internal stock HDD (500Gb/5400rpm) with SSD/HDD (256Gb SSD/1TB 5400rpm).
3. Installed W7 x64 on 64GB partition on HDD, which was a single-partition drive to begin with.
4. The remaining HDD partition and the entire SSD was put into a Fusion drive.
5. Using Command-R, new ML installed on Fusion HD.
Here is what I currently have...(Disk0 - SSD, Disk1- 1TB HDD, Disk2 - Fusion, Disk3 - External FW).
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         255.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         934.5 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion HD              *1.2 TB     disk2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS Rescue HD               371.8 GB   disk3s2
   3:                  Apple_HFS Leopard HD              31.9 GB    disk3s3
   4:                  Apple_HFS Snow Leopard HD         31.9 GB    disk3s4
   5:                  Apple_HFS Lion HD                 31.3 GB    disk3s5
   6:                 Apple_Boot Lion Recovery HD        650.0 MB   disk3s6
   7:                  Apple_HFS Mountain Lion HD        31.3 GB    disk3s7
   8:                 Apple_Boot Mountain Lion Recove... 650.0 MB   disk3s8
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
    =========================================================
    Name:         Fusion
    Size:         1190201270272 B (1.2 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     255716540416 B (255.7 GB)
    |
    +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     934484729856 B (934.5 GB)
    |
    +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
            Disk:               disk2
            Status:             Online
            Size (Total):       1185508581376 B (1.2 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            Fusion HD
            Volume Name:        Fusion HD
            Content Hint:       Apple_HFS
sudo gpt -r -vv show disk1
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1825165488      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1825575128     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1826844672   126679040      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

Help with boot camp partition on leopard!

So I wanted to increase my partition disc size, because I ran out of space. So I restored it and started the whole process over again, using like 75 out of the 102 gigs of free space. This time, something went wrong. I window came up and said:
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use the disk utility to format it as a single Mac OS Extended(journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
All I want to do is repartition it... I need help plz, thanks. Oh and I assumed the big files were obstacles so I deleted some 1-6 gig stuff I used to use not anymore(not any system stuff either) but that didn't work. Help!

I bought a new MacBook today with Leopard. I tried to install Windows XP (with service pack 2). I chose 32GB for windows. When I clicked start installation the screen went white, the windows CD was ejected and nothing else happened.
I had to switch it off manually and then I tried to restart the MacBook. The screen was just black.
I just read this:
+This means that the Windows partition is not bootable, usually because of a formatting problem. The Boot Camp Setup Assistant creates the Boot Camp partition, but the Windows installer must format it. Boot back into Mac OS X and re run the Boot Camp Setup Assistant. Remove the partition and re create it. Then install Windows again, this time allowing Windows to format the partition. Refer to the "Boot Camp Installation & Setup Guide" PDF document for more detail on installing Boot Camp.+
I couldn't reboot it into the Mac OS X so I went back to PC World and created merry ****.
They blamed me and I blamed them and said there was a formatting problem. I left the MacBook with them and they said they would try and install windows XP for me. I collect it today.
What do I do if they can't get windows on there as I don't really understand what I read above so will need something a bit clearer....step-by-step.
Can anyone help me please?

Want to upgrade Windows and migrate to a new Boot Camp partition

I'm a dedicated Mac user who must on occasion use Windows at work.
Knowing that it's always best to make changes one step at a time, I'm looking for recommendations before embarking on a multi-step upgrade and migration:
CURRENT SET-UP:
MBP 2009, Core 2 Duo, 3.06 gHz, 8Gb RAM, 500 gb hd
OSX Lion10.7.1
Parallels 7
Windows XP SP2
No Boot Camp Partition
GOALS:
Create a Boot Camp partition and migrate Windows to there
This will allow me to keep all my Windows files in one place and have access to them regardless of whether I boot into Windows natively via Boot Camp or via a virtual device using Parallels
Upgrade to XP to Windows 7 using Windows 7 Pro Upgrade for Vista
I bought this as a pre-release two whole years ago
Hey -- was told then on the MS web site that this path would work...
Use iCloud to sync my Apple stuff with my Windows stuff (Calendar, Contacts)
I currently do this successfully via MobileMe and Outlook Exchange
However, iCloud requires that syncing with Windows requires Vista or newer (so gotta go to Windows 7, 'cuz ain't going Vista)
Migrate all my Windows applications and files without having to do clean installs
I know, clean installs are always better
However, IT support at work is always overloaded, so I choose this route for now
Also, I regularly use Super Duper to back-up (clone) my internal HD -- and have restored a number of times, always successfully -- so that necessary step is well covered.
Any recommendations?
Thanks in advance.

I ended up deleting my WinXP partition and the upgrade to OSX 10.7 went fine.

Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?

Hi,
Did some preliminary searching on this before posting but couldn't find with confidence my answer. Does anybody know? Details below.
Q: Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?
I'm running 10.5.8 on a single drive with two partitions. 1st partition for OS-x is extended (journaled), 2nd partiction (ntfs) has solid version of Windows 7 RC, build 7100 running.
Thanks.

Hi Michael,
here are some nice 'Myths and Facts' about Intel Macs and BootCamp http://refit.sourceforge.net/myths/
Bottom line: while not exactly needed for installing Windows on an Intel-based Mac, the BootCamp Assistant 'streamlines' the process with a nice GUI (no need for 'cryptic' Terminal commands).
Mac OSX as of now (10.5 Leopard and above) plus the uptodate firmware for Intel-Macs already include everything needed to install and boot Windows.
Deleting or reformating an OSX partition does not affect the Windows partition.
However a repartitioning of course does, if the Windows partition is on the same harddisk.
But even a repartitioning of any other harddisk (ones that not have the Windows partition on them) does not affect the Windows partition.
Did that myself when adding/upgrading the harddisks in my Mac Pro.
Nonetheless, when 'fumbling' with harddisks and partition structure I always have backups of my important files at hand.
Take care
Stefan

Migrate from Boot Camp to Parallels

I've followed the threads about using the Boot Camp partition as a VM in Parallels, but I want to know if there is an advantage to keeping the Boot Camp partition if I doubt I'll ever need to re-boot into Boot Camp. I'm thinking I want to migrate my WinXP installation from Boot Camp into Parallels, and then delete the Boot Camp partition alltogether. How would I do this, and am I just making extra work for myself?

wadelaw wrote:
I may not have been clear before. I want to know the best way to migrate an existing Boot Camp WinXP installation into a Parallels VM. I would rather NOT simply use the Boot Camp partition as a VM.
Hi,
Parallels Transporter http://www.parallels.com/products/desktop/features/transporter/ should do the trick.
Regards
Stefan

Deleting Boot Camp Partition to make a new larger one- Will I be able to reinstall Windows 7 on it?

This may be more of a Windows question, but I'll ask it here. Right now, I have a Boot Camp partition on my iMac with Windows 7 installed on it. I want to dedicate more harddrive space to the partition, but can't make it larger. So, I need to delete the old one and make a whole new one. If I do that, will I be able to install Windows 7 on the new partition, or is the licence used up from when I originally installed it?
Thanks

Since you reinstall the same Windows 7 license onto the same computer it should be no problem.
Worst case would be that you have to call Microsoft to activate the new Windows 7 installation, but telling them that it is a reinstall should be enough.
Make sure to use the BootCamp Assistant for deleting the current BootCamp partition and for making the new one.
Stefan

I had to replace my iMac due to hard drive and Logicboard failure, so I want to reinstall Windows 7 on a Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

I had to replace my iMac due to HDD and Logicboard failure, so I want to reinstall Windows 7 on Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

Hi,
should be no problem.
Best case is you can activate online via Internet.
Worst case is you have to call Microsoft and explain that it is the same computer after a mainboard failure.
Regards
Stefan

Cannot restore Boot Camp partition using Boot Camp Assistant with OS X 10.6

I have decided to eliminate my Boot Camp partition running Windows Vista, but when I attempted to restore the partition using Boot Camp Assistant, I got the following message:
Boot Camp Assistant cannot be used.
You must update your system software before using this setup assistant.
I am running Snow Leopard, and there IS no update to the system software! How do I resolve this?

Found the answer. . . I needed to enable journaling on my hard drive and. . .voila!

What will happen with my Boot Camp partition if I'll do a celan install of Mac OS X Lion?

I'm planing to do a clean install of Lion (form USB drive). Will my Boot Camp partition (where I have Windows 7 installed) stay untouched?

You can clone the Bootcamp partition from within OS X using the free WinClone.
http://download.cnet.com/Winclone/3000-2242_4-11089354.html
You can also clone your Snow Leopard to another drive (needs a whole one to itself/partition) using the free Carbon Copy Cloner.

Will reinstall of OSX wipe out existing Boot Camp partition?

After a trial install of Parallels corrupted my XP side I have had to reinstall XP on a new boot camp partition, (seen as C: drive).
But soon after that I noticed a few apps not working properly or not at all in the OSX side.
I've tried to start up from the Tech Tool disk by holding the C key but it will not do it. It always just starts normally at the sign in prompt rather than running from the disk. I used the Disk Tools app. on the OSX installer disk to Repair Disk Permissions that seem to be needed. It then verifies the corrections are completed, but show back up again in repeat tests. I've concluded that I probably need to just do a fresh install of Osx but does that mean it wipes out the XP side as well?
All this reinstalling takes a ton of time that I need to be doing my job instead.

I installed Leopard over Tiger on two machines (normal upgrade not A&I) and on both machines the XP and Vista sides were still working just as before.
If you system is clean, there is no reason for an install of one to affect the other. Bootcamp is over and done with, once it creates the partition. At that point you have a dual-boot system and the partition wall will prevent one from OS from changing the other.
I have not even run BC2.0. My partitions were created with BC1.3 which I updated to 1.4 before installing Leopard.

Does anyone know what will happen to my boot camp partition once I upgrade to lion?

I have MacBook Pro (4,1) running leopard 10.6.8 and am hesitant about the upgrade to lion because I have a FAT boot camp partition with window xp in it and a number of apps that I wouldn't like to lose in the process. Does anybody know how the upgrade handles the boot camp partition?

While this is the way it is supposed to work, because the Lion upgrade does try to create a new Recovery HD partition on the system disk, there is a chance that the BootCamp partition can be corrupted. Unfortunately Apple does not provide a tool or instructions on how to backup the BootCamp partition. I have had good results with WinClone even though the program seems to be no longer supported. I have just restored my XP BootCamp partition after my live partition was apparently corrupted by my Lion install. My recommendation to anyone running a BootCamp partition would be to back it up prior to any upgrade attempt.

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

Does Winclone still work to restore a Boot Camp partition?

I have a 50GB Boot Camp partition, NTFS file system, with Windows XP. My computer is a Mac Pro running OS X 10.6.5. I have been using Winclone to clone the Boot Camp partition as a backup. I know that Winclone is no longer supported, and have heard that Winclone may not work properly with Snow Leopard.
I have no problem creating an image of the Boot Camp partition using Winclone. I have not yet had to do a restore to a new partition, but assume that some day I may need to do so.
My question is: Has anyone running Snow Leopard successfully used Winclone to restore a Boot Camp partition?
A secondary question: Is there any other utility, running on the Mac side, that will clone/restore a Boot Camp partition?

coruscate wrote:
I have the Winclone backup, but I am unclear how to restore it.
Using Winclone, I can select the Image to restore.
When I click on Mount, Winclone puts a disk image of the partition on the desktop.
When I select the desired partition in Destination and click Restore, it tells me "No Windows Partition Found."
Has anyone done this? Can you give me any advice about how to complete the restore?
Good luck to you. I am trying to transfer/migrate my Bootcamp partition (XP pro, FAT32) to a larger HD. I tried Winclone, and like you could create an image, but am unable to restore it on the new drive. I get the same error that you do. I tried creating a Bootcamp partition, rather than having Winclone do it, but would get this error in the log:
Source image volume size is not an exact multiple of 1 MiB
This happened whether I used Bootcamp Assistant or Disk Utility to create the partition, and it didn't matter whether I used a larger partition size or attempted to match the existing one. Apparently Winclone measures the block-sizes differently than Finder, Terminal, or any other measurement that I have used reports.
I've read about suggestions to turn my old FAT-32 Bootcamp Parition into an NFTS one, but I'm loathe to do that since I have on idea if that will work.

Will migration assistant migrate a boot camp partition?

Similar Messages

Maybe you are looking for