Will MM-SUS scenario work perfectly if we replicate SUS vendors from SRM

Dear Gurus'
We are going to use MM-SUS scenario in our classic implementation of SAP SRM. However, we are not replicating the SUS vendors directly from MM system using BD14.
Instead, we are replicating the SUS vendors from SRM system by ticking the 'Portal Vendor' check box in SAP SRM.
Will all MM-SUS scenario work perfectly in such cases? If I refer the configuration of MM-SUS scenario, it mentions about special configuration for transferring the confirmation key from ECC vendor master data to SUS system. How it will be taken care in SRM-SUS vendor replication?
Could you please share your experience?
Thanks and regards,
Ranjan
Ranjan Sutradhar

hi,
Are the Suppliers getting Time Out Errors?
are they able to create the documents ?
I have seen these sort of problems in many customers , there is one performance note created by SAP to resolve this issue.
I do not have the note number now.
But you can search the same with keyword performance along with the component areas
SRM-SUS
ans SRM-EBP-TEC-PFM.
Best would be to enquire with SAP also..

Similar Messages

How do we replicate product categories from SRM/ECC in to SUS system

How do we replicate product categories from SRM/ECC in to SUS system in srm 7.0

Hi Gopal,
Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
Let us know your exact requirements.
Regards,
Nikhil

MM-SUS Scenario: MM PO data transfered to SUS but SUS PO creation is fail

Hello All,
In case of MM-SUS scenario, when i created a MM PO and idoc data was sent to SUS, but in SUS transaction SXI_MONITOR i found that the line is scheduled instead of successfully status. In SMQ2 i found the error message: Storage form of product ID not yet defined in Cust omizing. As i know that in MM-SUS scenario, the material master is not needed to maintain in SUS. Please advise how to handle this trouble, thanks,
Best Regard
Joseph Chen

Hi Devi Swain,
Firstly thanks for your reply.
i have setted this configuration as you mentioned, and Prod.ID Lenth = 18, "Display leading zeros" and "save lexicographically" are not ticked. Then the new error message show:Prod.ID Lenth is longer than the customized setting.
By the way, MM material number lenth = 18
Best Regard
Joseph Chen

Error updating vendor from SRM to SUS

Hi All
We are using SRM 4.0 in Extended classic scenario, alongwith SUS.
We have a nightly batch run & vendor changes from ECC are updated in SRM.
For Vendors marked as Portal vendors, there is a real time interface between EBP and SUS (thru XI), which updates the vendor in SUS.
However some of the updates are failing in SUS. The error message in SXMB_MONI, trace is as follows.
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:R1:479 -Address still in use; change to validity not allowed Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
We are not able to determine which address and how exactly it i in use??
Regards
Kedar

Thanks for the Reply
When I restarted the messages in SXMB_MONI, the errors have gone now, but I still see failures in SLG1.
here is the complete description:
Don't know if it is processed or not?
Address still in use; change to validity not allowed
Message no. R1479
Diagnosis
You have attempted to restrict the validity period of a BP address. However, this BP address is still being used, which means that you cannot make this change.
System response
The system issues an error message. The validity of the address is not changed.
Procedure
Display the where-used list for the BP address. If you still want to change the validity of the address, then change the address reference for the applications in question.
In most cases, if other applications are affected, you can navigate from the where-used list directly to the corresponding application in which you call up the context menu.
Then try again to change the validity of the BP address.

Goods receipt data from R/3 to SUS ( MM-SUS Scenario)

Hi !
In the MM-SUS scenario, we create an ASN in SUS and the system automatically creates an inbound delivery in the backend MM system.Now after we post a GR with reference to the Inbound delivery - can we send the GR data back to the SUS system. If yes - how do we do it ?
If the answer id no - I would like to understand the use of links available for Goods receipt on the SUS home page.
Thanks in advance.
Regards
Manoj

Hi
<b>Please go through the list of SAP Consulting OSS Notes, which will definitely answer your queries -></b>
Note 868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement
Note 1028264 - Consulting solution: Additional function for SRM-SUS
Note 982871 - Consulting services: supplier integration in SRM
Note 1026638 - GR Output Integration with MM-SUS Scenario for R/3 <= 47-
Related Notes
Note 1064557 - SRM 6.0 SP02: Additional Notes to be applied on SRM Server
Note 995352 - SRM 6.0 SP Stack 01 (03/2007): Release Information Note
Please implement the following notes as applicable, if you use GR Notifications functionality in MM-SUS scenario:
Note 1028920: RPDODELVRY does not work when both PO and SAR are selected
Note 1026638: GR Output Integration with MM-SUS Scenario for R/3 <= 47-
Do let me know.
Regards
- Atul

Possible version conflict, sending purchase order to SUS in MM-SUS scenario

We are currently trying to get the MM-SUS scenario working. In this
scenario, we create a purchase order in the ERP/MM system. The
purchase order is then transferred into SUS via XI/PI.
After creating a purchase order in the MM system, the purchase order
reaches the SUS system, but then errors-out in the SUS system upon
posting. The specific error is paraphrased as follows:
No interface action for sender or receiver found (from Trace)
PARSE_APPLICATION_DATA
CX_ST_MATCH_ELEMENT
System expected the element http://sap.com/xi/SAPGlobal20/Global;
PurchaseOrderRequest
We suspect a version conflict. The SUS version is 7.01. The XI/PI
system is version 7.11.
Can you confirm or rule-out a version conflict?
The Integration Builder scenario we are using is Plan
Driven Procurement with Supplier Enablement.
We have tryed many variations in Integration Builder, but all
produce errors in SUS. The test tool in Integration Builder also shows errors
for certain message types. The message type ORDERS.ORDERS02
needed to be added manually, and did not come along with the scenario.
Edited by: Bill Guderian on Mar 19, 2010 4:53 PM

Any clue from here.
Note 936003 - ERS Invoice causes conversion error within SRM
When the SRM system attempts to process an ERS Invoice sent from the MM backend, a PARSE_APPLICATION_DATA CX_ST_DESERIALIZATION_ERROR fault is thrown.
Other terms
CX_ST_DESERIALIZATION_ERROR PARSE_APPLICATION_DATA SUS SRM EBP ERS Invoice XI Exchange Infrastructure Mapping
Reason and Prerequisites
This error will occur when the IDOC does not have a VPREI value; it is the result of an error within the divide logic of the XI mapping operation. This operation is performed within the XI system. A calculation of NETWR/MENGE is performed; however, the result is not properly formatted. As such, 72.30/10 produces a result of 7.2300002. This value is too long for the inbound SRM proxy and hence the error is thrown.
Solution
The solution to this problem is to add a FORMATNUM function within the XI mapping operation. This restricts the result to 2 decimal places, which adheres to the definition of the inbound proxy.
Step by step directions on how one implements the FORMATNUM function are as follows:
1. Log into the XI system with SAPGUI
2. Start the Integration Builder:Design tool (for steps on how to do this, review the steps below):
    a. Run transaction sxmb_ifr
    b. This will cause a browser to come up. Select the Integration Repository link
3. In the left pane, select the Objects tab
4. Navigate to the SAP SRM SERVER ' SAP SRM SERVER 5.0 ' http://sap.com/xi/SRM/SupplierEnablement/Global --> Mapping Objects --> Message Mappings folder
5. Double-click on MM2SUSInvoice
6. The right pane will display the mapping object
7. Select Edit mode
8. In the box that contains the output (Message Type: InvoiceRequest), navigate to InvoiceRequest ' Invoice ' Item ' Price ' NetUnitPrice
9. Double-click on the Amount element and you should see the mapping, represented graphically in the bottom pane
10. In the status line of the graphical editor, select Arithmetic from the list box:
11. To the right of the listbox, scroll until you see the FormatNum function
12. Click on FormatNum, which will cause the function to be added to the graphical editor. You may drag the box as desired
13. Select the connection that binds the if/then/else to the Amount box by grabbing the arrow within the input of the Amount
14. Release the drag of the connection while over the input to the FormatNum box. This will reassign the output of the if/then/else to the input of FormatNum
15. Create a connection between the output of the FormatNum box and the input of the Amount box. You accomplish this by clicking within the output and releasing within the input (respectively).
16. Save the modified mapping object
17. Activate the changes
    a. In the left pane, select the Change Lists tab
    b. Navigate to the Standard Change List entry
    c. Right-click the Standard Change List entry and select Activate
    d. Select only MM2SUSInvoice if more than one item is available, and press the Activate button
18. This will complete the required modification.

MM-SUS Scenario - BP Creation from MM with external number

Hi Gurus,
We are implementing MM-SUS scenario on landscape involving ECC 6.0 EHP5 and SRM 7.0 EHP1.
In connection with Vendor transfer from ECC to SUS, We want to achieve that ECC vendor and SUS business partner (BP) have the same number (I E: vendor 300000 in ECC has BP 300000 in SUS)
But in the tests we performed sending vendors executing on ECC tx BD14 (via PI system), SUS ever creates Business Partners with numbers from internal range in spite of we have available external number range.
Can anyone tell me if is possible or SUS is able in standard way, receive a vendor xml message and perform BP creation with the same number (XML field <PartnerID>) sended from ECC.
I appreciate any help of yours. Thanks in advance.
Regards,
Horacio Miranda

Than you very much again Nikhil.
Also SAP answered to us about this topic as how you did, and definetely is impossible manage in SUS same number for BPs as vendor number in ECC.
Regards,
Horacio Miranda

Cp6: mp4. Video works perfectly when published, once uploaded to website, does not appear.

Cp6: Not sure what to do.
The mp4 works perfectly when reviewing the published file from my computer, however, once uploaded to my web site, does not work, just a blank screen. The rest of the file works perfectly.
I am uploading to a Google site and a Google drive, so security, I think, is not an issue.
Thanks so much!

I found the mime settings and added them to the server.
Downloaded the AC_FL_RunContent.js and AC_RunActiveContent.js to
the scripts subdirectory.
Read a bunch of stuff from Adobe and I'm even more confused.
Getting Flash to run is a real Pain! If I don't get it soon, I'm
just going to use links... this is getting ridiculous. This should
be SIMPLE... embed the video , download to the server and GO.
Any ideas?
Thanks,
Todd

My husbands ipad2 keeps freezing on the screen, when he has entered the password what ever he working on stops after approx 2 minutes. It only started this morning and has been working perfectly prior to this. I purchased this 64gb 3G machine via eBay

My husbands ipad2 64gb 3G the screen keeps freezing. What ever you are working on stops after about 2 minutes the screen freezes and after another few moments you are required to put you password in again. It only started this morning and had been working perfectly until today. I purchased from eBay three weeks ago. If watching bbc new you can only watch for 2 minutes and same for video and games. Keeps coming back to screen saver where all icons are. Sometimes we are to use the on off button to get it going again. I set it up the same as my own iPad 32gb. Hope you can help? Thanks.

Spilled water without flavorings and especially without sugar is something from which your computer may recover. The best thing to do is to shut off as quickly as possible and remove the battery pack. Place the computer in a sunny window with the lid open to promote evaporation of the water. On top of a refrigerator is also a warm perch that'll promote drying. It is difficult to say exactly how long it takes to dry the computer; that depends on ambient temperature and humidity, and how how water is in there.
The biggest threat from the water is corrosion of metal parts, so drying quickly is a must. Also, water can form mineral salt deposits that can grow conductive dendrites between adjacent traces on printed circuit boards. The formation of dendrites is aggravated if you apply power before the machine is dried out. The worst damage would be if water managed to get in the breather hole of the hard drive - luckily, the way the drive is mounted, that would be fairly unlikely.
Bill

Will PFC power supplies work with SIMULATED sine wave inputs

Will PFC power supplies work with a SIMULATED sine wave input from a UPS unit?

Not sure whether you really meant "PPC" and have never heard of a PFC power supply, but if your question is whether a Mac PPC computer will run on a UPS, then the answer is definitely "yes" as my machine has shown twice in the past 12 months and several times in the past on the G5 tower and with a G3 B&W.
I haven't dragged the old analog scope off the shelf to see what the UPS output really looks like, but I suspect it is no dirtier than the mains power in my neighborhood.

MM-SUS Scenario -Vendor replication through XI

Dear Experts,
We are implementing plant driven procurement and we are on classic scneario SRM 5.0 and XI 7.0.
We are replicating the vendors from MM system to SUS system through XI. When we replicate the vendors from MM system and system sent successful XML message to XI and reached to SUS. IN SUS status of XML message is showing as "System Error - Manual Restart Possible".
Please advise us how to correct this problem
Thanks
Ravi

Hi Sridhar,
Thanks for your reply. I checked the blogs which you sent and I udnerstand that we need to handle the exception CX_BBPX1_STD_MESSAGE_FAULT .
Please find the complete the error message below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please let me know what need to be done to rectify this problem.
Thanks
Ravi

Vendor replication and exchange documents from SRM to SUS (using PI)

Hi Gurus,
We are implementing scenario plan driven procurement with suppllier collaboration on SRM 7.0.
Our architecture involve:
A server machine with SRM 7.0 (SRM server and SUS components both in this machine)
A server machine with Netweaver PI 7.0
A server machine with EP 7.0
A server machine with SAP R/3 4.6C
Now we are working on vendor replication process in order to carry out vendors from R/3 to SUS (on portal enviroment) and we made following steps:
- Replication of vendor from R/3 to SRM by mean tx BBPGETVD: OK
- Replication of vendor from SRM to SUS (on portal enviroment) by mean tx BBP_SP_SUPP_INI:
In this step we put the BP (created with tx BBPGETVD) on field "Supplier" but we obtained the Message no. BBP_XP004
"No vendor allowed for vendor portal"
So we want to know, in connection with mentioned architecture, the way to perform this activity in order to replicate the suppliers in SUS.
Is possible perform activities related to exchange documents (by mean Netweaver PI) between SRM and SUS (as necessary for our implementation scenario) if these mentioned components are installed and configured on the same phisical server machine?
What is the best recommendation about installation of SRM and SUS? A unique server machine or separated server machines?
Is there any inconvenience or technical reason having SRM and SUS in the same server machine?
Thanks in advance.
Regards,
Horacio

Hi Nikhil,
Thanks for your soon response.
Our process involve PR and PO manual creation in MM and then PO (with ALE message type) is routed to a supplier in SUS via XI. We could achieve that steps succsesfully.
We don´t have in scope neither use SRM for sourcing nor PO creation (via IDOC) in MM.
In connection with my previous explanation; Would you say that our process is MM-SUS?.
If yes, can I follow the steps mentioned in below link described at point u201CProcess Flow Without Supplier Registrationu201D?. What´s the difference between creating and replicating bussiness partner data?.
http://help.sap.com/saphelp_srm40/helpdata/en/c0/7a0859ee91d54aa48a69fb5d2c4089/content.htm
Thanks in advance.
Regards,
Horacio

PO replication from SRM to SRM -SUS

Hello Guys
How to replicate a PO from SRM to SRM SUS Client in case of PO created in SRM SUS scenario.
Any configuration and back ground job needs to be scheduled. Also for the corresponding documents from SRM to SUS and Vice versa.
Second, why middle ware PI is used for replication of vendors from SRM to SRM SUS as they both deploy on same system with different client.
Please reply guys
Thanks.
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:57 AM

Hi Santosh,
As you are using extended classic scenario for transferring PO from SRM EBP to SRM SUS.
You can schedule a report RSPPFPROCESS for every minute with following varient
Application - BBP_PD
Action Profile - BBP_PD_PO
Action Defination - STANDARD_PO
Promotion Status - (0) Not Processed
and also select Processing withhout dialog checkbox.
Regards,
Pawan Keshwani

Turned "Sort by Album Artist" off on iPod Touch 5th Gen so individual artists on compilation albums will show up separately under "Artists" with no succuss. This worked perfectly on my Ipod Touch 4th Gen. Any Advice?

I have a 5th Gen iPod Touch. It is running the latest iOS, and iTunes has the latest update. I have many compilation albums that I imported from CD. I want the individual artists and their associated song(s) to show up under "Artists." I have turned off "Sort by Album Artist" in Settings. This worked perfectly on my 4th Gen Touch. Each artist from a compilation would show up under "Artists" with the correct song(s) showing, while still showing the whole compilation under "Albums." Now, on my 5th Gen Touch, when I try to look at an artist from a compilation under "Artists," I get one of the following: the correct artist and song, an incorrect artist and song, or an incorrect artist with the entire compilation album showing up. Is this a bug in the new iOS 7, or am I doing something wrong? Anyone else with this problem? Any advice?

I have the same problem and I have been really trying hard to find a solution. No success.
My main problem is this: For example: Top Gun soundtrack - I look at Kenny Loggins under artists and I see his albums and songs, plus the 2 songs from top gun. Then when I look at Miami Sound Machine (also on top gun cd) under artist, I see correct albums from Miami sound machine, but under the top gun soundtrack, it shows the 2 kenny loggins songs instead. then if I look at another artist from top gun cd, it continues to show the kenny loggins songs. It doesn't matter which songs i look at, but the first one i start with will always show up on the others. Funny thing is, if I click on the song, the correct song plays, it just says it is the kenny loggins song!!! ha ha. Been dealing with this for over a year now. Pretty aggravating. Happens whether I have compilations checked or unchecked on settings. I have over 50 compilation albums and some are checked, some aren't...they all behave this way.
On Mac, itunes (v 12) it all shows up correctly and works fine. I have become an expert on ID tags and am very thorough with my tagging. HAND TAGGING, not some program that does it for you...they are never correct. I match all my tag info with the info in the iTunes store for each album so it is sure to match. Has taken a long, long, long time.
Love iTunes match, but this one issue is a real pain. Anyone with any ideas, I'd love to hear them! Thanks!

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

Will MM-SUS scenario work perfectly if we replicate SUS vendors from SRM

Similar Messages

Maybe you are looking for