Will motherboard onboard audio work fine for CS5.5

Hi All
I am building a a new system to edit with using Production Premium CS5.5 . We do mostly wedding videos and would need to edit 3 to 4 layers (from 3 to 4 cameras) of AVCHD 1920 x 1080 footage.
I read that you need an ASIO compatible sound card as part of the system requirements. Will the onboard sound on the Asus Intel X58 Rampage III EX work fine please or does one need to purchase a dedicated sound card?
Many thanks
Kind regards
Anthony Freeman
www.freemanproductions.co.za

I have an Asus P6T SE with CS5 and AVCHD from a Canon Vixia and all works well with the stereo in the video and onboard sound (I do not do 5.1 audio)

Similar Messages

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

I loaded mozilla 6 on my new laptop. it was working fine for a few weeks, but now will not launch at all. how to fix??

I loaded mozilla 6 on my hp laptop and it was working fine for a few weeks, but now it will not launch at all wheather I clip on the icon or type in the site. there is no message or warning, it just does not start up. I am a long time firefox user.

Hi Gamon,
Do you see any error message on your screen when you open up Acrobat? What happens when you open Acrobat?
Regards,
Rahul

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.

I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it?

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it? OS 10.8.3, Safari 6.0.4

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

HT5642 Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....

TS1741 Does anyone have trouble with the Remote app losing contact with the iTunes library after it has been connected and working fine for a while. If I go to the computer and turn off sharing, then turn it back on, it will relocate the library again.

My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!

I have just found the problem to be windows firewall on my library PC
I can only presume there has been an update to windows firewall or iTunes
all the relevant programs were on the allowed list
I'm now currently running with firewall turned off on my library PC.
I'll update when i have found the rogue setting.

Will not allow me to sign into messenger or FaceTime, something about the connection but everything checks to fine and the mac book works fine for the wife?

Will not allow me to sign into messenger or FaceTime, saying something about connection, but everything is fine and the Mac book air works fine for the wife>

Hi Alexrichard,
I have an article for you that will help you troubleshoot this sign in issue:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

Nforce 3 Platninum and 6800GT works fine for a week or so then fails to boot.

Hi everyone,
I have read pretty much all the posts on the forum, but none show the exact same problem as mine, as far as I can see.
I have an MSI Nforce 3 plat mobo (with latest BIOS), which is turning out to be the worst investment I ever got.
My specs are as follows:
2x512MB Kingston ram
AMD 3.5
pixelview 6800gt
raptor HD
thermaltake 480W PS
I upgraded to the nforce 3 for the 939pin socket for my AMD chip. I had constant freezing, so my old memory I had to chuck and buy 1GB of Kingston ram. Using my old ATI 9800pro my system was stable. Absolutely no crashes. I decide to buy a pixel view 6800GT AGP card to upgrade. Cool. Plug it in, reload windows (latest WHQL drivers from NVIDIA). Everthing is fine, for about a week. Then bad things start to happen. The symptoms are:
Turn machine on, BIOS check all ok, machine does DMI listing. As soon as the "starting windows" screen comes up, the video display goes corrupt. Either white, with diagonal lines, or windows XP logo all over the screen several times and corrupted. The machine does boot into windows, but the screen is blank or corrupted. I hear the windows startup sound click in. Press the power button, shut down the machine. Reboot. It usually comes up fine.
I thought initially it was the graphics card, so I swapped it out. Reloaded windows. All works ok for about a week. Then, again same problem. Windows event viewer shows no errors.
My question is this: can this be fixed or is it hardware incompatibility. If so, can I fix it tweaking the mobo settings. I have tried the AGP fast writes, didn't work. This looks like intrinsic Hardware incompatibility, but if it is this, why does it work for a week without any problems, and then it gets worse and worse and worse.
If this is a hardware problem, what is the cheapest way to get out of this. Is MSI nforce 4 any better or do I ditch pc gaming all together. I have been gaming from XT days, and I have to say, I am totally disheartened with this whole mess. The one thing in my life that I do want control of is a bootable, reliable PC to relax with at the end of the day. At the moment, I just shed tears as it is turning out to be a costly nightmare.
Any help would be greatly appreciated. My friend has offered to buy the 6800GT from me, and give me my old 9800Pro back. Should i do this???
Thanks guys
John

Hi Makisst,
Thanks for the reply.
System specs are as follows:
AMD 3500 64
MSI Neo Platinum (nforce3)
Creative labs Audigy2 pci card
Pixelview 6800GT AGP 256MB
Kingston DDR400 512Mb PC3200 400Mhz x2
MSI K8N NEO2 PLATINUM 939 pin (MS-7025-010)
Western Digital Raptor™ 74.0Gb 10,000RPM SATA150
Themaltake 480W power supply.
I have 2 extra ATA HDs, which I have not added to the system to rule those out.
I have a DVD player (bog standard MSI) and a CD burner (not plugged in so as to rule this out).
The only thing I have not tried is removing the sound card (audigy 2). What is driving me absolutely nuts is that the machine works fine for a week. Then there is a slow degrade. First boot, scrambled screen, second boot fine. Then a few days later, it will only boot the thrid time around. Then after 2 weeks, it won't boot at all.
I have tried this card in another persons machine (the 6800GT that is), and it boots fine.
I can honestly say I have not tried playing with the BIOS settings except for AGP fast writes, as it was working fine with the Radeon 9800 pro. I have done two full HD formats, and completely wiped the Raptor twice now.
I shall have a look at the BIOS settings you recommended tonight, and see if they make a difference. I am, to be 100% honest, a little bit scared of playing with the BIOS settings, as I really don't know what I am doing. I see that the ppl I bought the machine off have set timings in the BIOS to 3-3-8-3 (I think, I will confirm this tomorrow), so should I leave these settings?
I shall also remove the Audigy 2 card and see what happens. System properties show machine has no conflicts though. It is almost like the card is not initialising correctly. Why this happens only after 1 week though I have no idea. This is the third time it has started happening after 1 week.
The only extra software loaded is Norton, Win XP SP2 and directX9. I really have not had it stable enough to start loading extra software. I am getting too tired after reloading for the third time in 6 weeks.
I will let you know tomorrow either way.
Many thanks
John

Will motherboard onboard audio work fine for CS5.5

Similar Messages

Maybe you are looking for