Will ms access work

If I run windows 7 on my macbook, can I use microsoft access?

You can use any program that runs in Windows 7.

Similar Messages

Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access.

Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access

Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
http://itunes.apple.com/us/app/airport-utility/id427276530
if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express, you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad. Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
http://support.apple.com/kb/HT4356
I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

Firefox will not automatically load Tiscali and after I have loaded using START it will not access my e-mails on tiscali

Until I loaded the latest version of Firefox I accessed Tiscali without difficulty usong the Icon. Now it will not access the internet at all and I have to use Windows to access the internet. Tiscali then loads but i cannot access my e-mails and I get a message telling me I have 'undefined e-mails'. Windows Explorer works perfectly

Hi again,
Helps if I give the correct link ! <br/>The press shift button appears to still work, but the option to start in safe mode from the programs listing of a standard install I do not think exists anymore.
Safe mode will start from a command line, (or a shortcut) and in some circumstances you may need to enter the full path name on a command or shortcut detailed instructions are at http://kb.mozillazine.org/Safe_mode
Remember (at least at this stage) do not make changes when you get the options list, just click on the continue button.
If you think that RealPlayer is causing the problem you could uninstall that for now.
Firefox recent versions are 3.6 4.0 (and 5.0 in beta). There is some debate as to whether creating new profiles or re-installing Firefox is the simplest method of troubleshooting and solving some of these problems, personally I use multiple profiles and multiple versions of Firefox, and tend to forget the required procedures are less than straightforward. For now at least try [[safe mode]] again.
* see also Instructions for [[installing a previous version of firefox]]

If I buy a used iPhone 4 without a data plan will the GPS work?

I live in Canada and am a complete newbie when it comes to cell phones and data plans. I am not interested in having or paying for cellular telephone capability.
I've been using the 64 Gb iPod Touch 4 but detest its 0.7 Mb still camera and bemoan its lack of GPS.
Now that the iPhone 4S has been released, there are many folks selling their older iPhone 4s. I'd love to use one of these older iPhone units with their better camera and GPS capability, but don't want to pay for a data plan, nor am I willing to pay $850 for an unlocked iPhone 4S. I'm happy to continue using wireless internet and don't need a cell phone.
Being a newbie when it comes to data plans and cell phones, if I purchase a used iPhone 4 from someone:
1. Does it need a SIM card (activated or not) to use the GPS on it? If yes, must a deactivated SIM card be provided by the seller or where can I obtain one?
2. Does the iPhone 4 need to be on a cellular plan to use the GPS?
3. I can use a deactivated iPhone 4 on WiFi only as I've been doing with the iPod Touch 4, correct?
4. If I can use a deactivated, non-contract iPhone 4 on WiFi only, will the GPS work and allow me to use GPS-enabled apps? If yes, does it somehow still "tie"into available local cell networks to achieve a position without me paying for (or being registered for) cellular access?
5. Can future iOS upgrades (say to iOS5) still be performed on a deactivated iPhone 4 without a cell plan?
6. Do I need to purchase the iPhone 4 from a Canadian seller given my above questions? What other questions do I need to ask of the seller when looking for a used iPhone 4?
Thanks in advance for any help with my newbie questions!

Thanks for that, Paulfromwallasey. I live in a rural area without many cell towers and with WiFi only in my home. I do use offline maps (topographical and street maps) on my iPod Touch 4 outdoors (not needing a signal, WiFi or cellular). I also have a hand-held Garmin GPS receiver but would rather use the GPS in the iPhone (its positional accuracy, while likely being lower than that obtained from my Garmin, is likely sufficient for my needs).
I guess that one of the questions that I was asking is if I were to purchase a used iPhone 4 from someone, and the SIM card have been removed, would the device's GPS still work with GPS-enabled apps (albiet without the cellular-assist)?
Can any pay-as-you-go SIM card be purchased for and used in a deactivated iPhone4? Would this even be necessary for the GPS?
Thanks again.

E4200/E3200 in bridge mode...Guest access works, but does not roam between routers...any ideas?

I have installed wireless in my church...main router is E4200 in the office set up as follows:
IP: 192.168.0.1
Subnet: 255.255.255.0
DHCP enabled (Range = 192.168.0.4-192.168.0.103)
Guest network enabled
Static DNS (for content filtering)
NAT: Enabled
Second router E3200 (in bridge mode) - connected LAN to WAN
IP: 192.168.0.2
Subnet: 255.255.255.0
Guest Network enabled
DHCP (obviously disabled)
Static DNS (for content filtering)
NAT: Enabled
Third router E3200 (in bridge mode) - Connected LAN to WAN
IP 192.168.0.3
Subnet: 255.255.255.0
Guest network enabled
DHCP (obviously disabled)
Static DNS (for content filtering)
NAT: Enabled
The 2 routers in Bridge mode are connected to a 16-port unmanaged switch (with other PCs, etc.), which is then plugged into the main router in Port 1.
SSIDs on all 3 routers are exactly the same for both main and Guest networks.
The main network works flawlessly. The router in the office hands out IPs in the 192.168.0.XX range and you can wander throughout the church and maintain a persistent Internet connection. File and print access works fine too from anywhere in the building.
For the Guest network, you can set up a laptop next to each router, obtain an IP address, reach the logon page and surf the Internet without issue. So, the Guest Network works fine from each router.
However, if you wander around the church while on the Guest network (such as with a smart phone), the following happens:
-On either of the E3200 routers (in bridge mode) you get the login page as you wander into the range of each router. I would have thought that if you logged in once, you would be good to go.
-You get a different IP from each router. On the E3200's in Bridge mode, you get a 192.168.33.XX address. Additionally, the gateway is 192.168.33.1. On the E4200 (main router) you get a 192.168.3.XX IP and a gateway of 192.168.3.1.
-As a result of getting different IPs, the smart phone becomes confused and generally won't connect to the Internet.
So, it looks like each router maintains a separate list of who has entered the correct password to get onto the Guest network. Additionally, it appears as if each of the 2 routers, supposedly in Bridge mode, is still handing out IP addresses on the Guest Network, rather than deferring to the router in the office like they do for the main network.
I have seen a lot of postings about how to put routers into Bridge mode and problems with the Guest Network, but posts that I've seen point to the Guest network not working at all, as opposed to this issue where it works; the bridged routers, though, continue to like to hand out IP addresses on it, making wandering around the church while connected to the Internet not possible while connected to the Guest network.
Anyone else experience as similar situation? Any possible solutions out there?
Thanks!
-Gil
Solved!
Go to Solution.

I do understand what you were trying to do here since you would like to have only 2 SSIDs (main & guest) for perhaps easy connectivity. The reason why you were not having problems getting online wirelessly when you were connected to the main network it’s because the computer was connected to only one DHCP server since the 2 bridge routers were just acting as a switch or a passthrough device. Now with guest network access it is a different scenario, a guest network is a virtual network meaning to say it’s like your having another router embedded on your router. Since it is a virtual network, then it does not follow the parameters of the main network, hence even if the router was set to bridge mode those routers will still have their own ip address of either 192.168.33.1 or 192.168.3.1.

Will the ram work?

Will this ram work in a imac(ambient light sensor)?
And also will this be a "matched pair" with the original 512 stick?
http://www.newegg.com/Product/Product.asp?Item=N82E16820141164
thanks!

CanadaRAM:
i You're better off shooting for a 1 Gb DIMM than trying for matched pairs with another 512 Mb. Besides the probablility that it won't match, the benefit of the extra 512 Mb RAM far outweighs the negligible real-world benefit of "matching" for 128-bit access.
The OP is probably better off just going to a "matched pair" of 1 GB DIMMs. That would both max out the capacity, and provide the 128-bit data path.
If he's willing to shop at Newegg and take the risks that something might not work, then there are matched 2 GB kits there at reasonable prices.

Since installing Mountain Lion my Safari will not access my contacts list when wanting to forward an e-mail or send a new one. Why?

Since installing Mountain Lion I am unable to access my contacts list in Safari to forward an e-mail or send a new one. The Insert contacts link above the address box is not active and will not access the Contacts List. How can I fix this?

Can you open Contacts and edit, insert, and delete cards, or does it fail to work, also?
Try the steps I outline here: Re: After Lion upgrade, my addressbook does not work++

I'm thinking of buying an ipad wifi for my mom who lives in Kenya. Any issues I need to know about? Will the ipad work ok?

I'm thinking of buying an ipad (1) wifi for my mom who lives in Kenya. I understand the charger is universal and will work with an adapter. Any other issues I need to know about? Will the ipad work ok?
She is 68 years old and has vision problems. My thought is that it would be eaiser for her to see than a ipod touch. She would use it for music, maybe reading, some games. I'm not sure she would be adept enough to download many apps, so we'd prbably load it up for her.
Thanks for any input!

She's going to need to update and at some point restore the iPad which requires a computer.
For vision problems she can enable zoom. Tap Settings / General / Accessibility.

Whenever i download the latest version of itunes it slows my computer down and will not access the store, whenever i download the latest version of itunes it slows my computer down and will not access the store, any suggestions?

whenever i download the latest version of itunes it slows my computer down and will not access the store, whenever i download the latest version of itunes it slows my computer down and will not access the store, any suggestions?

In the course of your troubleshooting to date, have you worked through the following document?
Apple software on Windows: May see performance issues and blank iTunes Store

Will Iphone GPS work in Spain?

My husband and I are going to Spain in a couple of months and plan on driving, will my gps in my iphone 3g work?

GPS is Global Positioning Satellite it will work globally.
Iphone gets its maps from the internet. Your iphone will know where it is, but without internet access, there will not be a map on which to plot that location.
As long as you have internet access, you will have access to maps.

How will the preorder work?

how will the preorder work?

Yes.
You can use the 3G as an iPod Touch - there is no device limit for the number of iPods, iPhones, and iPads that can be synced with the same iTunes library and iTunes account on the same computer.
The iPhone 4 will use a micro-SIM card - just as with the iPad. Keep the no longer activated SIM card with your 3G inserted in the 3G even after the iPhone is no longer activated. In order to install a firmware update on a no longer activated iPhone or restore a no longer activated iPhone with iTunes if wanted or needed, the no longer activated SIM card needs to be inserted in the iPhone - the SIM card that was used with the iPhone when it was activated.
You can enable Airplane mode followed by turning on wi-fi access when internet access is required.

What will happen to my key if my hard disk is formatted, will the key work after my hard disk is formatted ?

I want to know that, will my synchronized computer key will work if I format my hard disk because when hard disk is formatted then the key code will be erased , though I have saved my key will it work after formatting hard disk . let me know .
let me also know that what will happen if I lose the key I had saved then how will I access my synchronized computer .

Hi!
Can you point to the information where it says that the information is backed up in our servers? If that's mentioned anywhere we need to clarify it.
The only reference I found is here: [[What is Firefox Sync?]] and it specifically says that the information is synched across devices through our servers. If that's misleading, let me know so we can rephrase it.
Regarding storing the key in your pen-drive or any other back up system: This is the best solution and it will work smoothly after you format your computer. The key doesn't change when you format your computer so you will have no issues after all.

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

Will ms access work

Similar Messages

Maybe you are looking for