Will MSI NVidia GeForce 8800GT OC work with my mobo
hi could anyone please tell me if this card will work with my motherboard cos i have read a lot of reviews that say only work with 3 out of 5 mobo , i have the gigabyte s series ga-m57sli-s4 mobo it has 2 x pcie x16 . if it is possible could you get back to me today because i ordered them last night before reading the review . Thanks . Daniel
Make a signature with PC information. Also include specs for PSU from label on it, see my sig. example of what info to provide. By making signature your specs will show in every post you make.
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile" what I show in red below, scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options
Similar Messages
-
Will card nVidia geforce GTx 760 work with premiere pro?
Will card nVidia geforce GTx 760 work with premiere pro?
Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
Thanks
Jeff Pulera
Safe Harbor Computers -
Will the XFX Geforce 6800 Ultra work with G5 Mac
I have the standard NVidia Geforce 6800 Ultra AGP card working in my G5 2.7DP, and have been given an XFX version of the card.
But the literature that comes with the XFX suggests it's for Windows, not Mac. Will it work in my Mac? If so, I'll keep it for a backup; if not, it's no use to me.
Description of card is XFX Geforce 6800 Ultra 256Mb DDR3 AGP8x Dual DVI TVout.It won't work as is.
If you have the right ROM chip on it, you can put it into a Windows machine and flash it with a modified Mac ROM. If all is right and goes well, then it would work in a Mac.
Otherwise, as you put it, it is of "no use" to you. -
Problem with MSI Nvidia GeForce 6800 LE (128MB) when playing 3D games
Games problem
I have bought a new MSI Nvidia GeForce 6800 LE (128MB) a couple of months ago and have been have loads of trouble when playing games.
In windows, the graphics card works fine. The computer never crashes and everything is speedy. Movies on DVD, Xvid, Divx all play fine without problem, the most I get is the occasional freezing and then windows will be normal again.
The problem arises when I try to play a 3D game. When I load up the game it goes into the menu screens ok, the computer will load up the 3D engine and it will play for around a minute nice and crisp then the screen will go blank and computer will lock up. Then all the drives will go quiet and the computer will make 3 beeps with the PC speaker. Pressing CTRL+ALT+DEL at this point does nothing, nor does the reset button. I have to turn the power on and off.
I really have no clue why this is happening, I have taken the covers off and kept it in a cool area, hoping that it was something to do with over heating, my computer is not overly cluttered and this has made no difference.
I have also unplugged the CDR, DVDR, USB ports, one Hard drive (storage) to see if it was something to do with the power no getting to the Videocard and then tried to play a game and the same problem arose.
I have two games that I have tried, Tiger woods 2005 and doom III, both of which crash in the same manner.
I have tried to be as detailed as I can with the descritopn of my computer below and the power details I'm not sure about so I posted a picture of the power unit to help.
Many thanks for your help in this matter, I'm desperately trying to get some worth out of this card and feel frustrated that its going bonkers only when trying to play games :/
Please tell me if you require further information about the system.
Neehar Shah
Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
Speed : 3.21GHz
L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line size)
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : Legend QDI PLATINIX-8
Total Memory : 511MB DDR-SDRAM
CPU
Model : Intel Corporation 82845G/GL/GE Brookdale Host-Hub Interface Bridge (B1-step)
Front Side Bus Speed : 4x 200MHz (800MHz data rate)
Total Memory : 512MB DDR-SDRAM
Memory Bus Speed : 2x 200MHz (400MHz data rate)
BOIS
Manufacturer : Phoenix Technologies, LTD
Version : 6.00 PG
Date : 06/19/2003
Plug & Play Version : 1.00
SMBIOS/DMI Version : 2.30
(EE)PROM Size : 256kB (2Mbit)
Video System
Monitor/Panel : SyncMaster 171S/ 175S/ 170S, SyncMaster Magic CX175S-AZ/LX175S
Adapter : NVIDIA GeForce 6800 LE
OEM Device Name : Nvidia Corp ??? (0042)
OEM Hardware ID : FUN_0, VEN_10DE, DEV_0042, REV_A1
Device Name : Micro-Star International Co Ltd (MSI) ??? (0042)
Product ID : VEN_1462, DEV_9751
Revision : K / 2 (161)
Physical Storage Devices
Hard Disk : Maxtor 6Y080L0 (76.3GB)
Hard Disk : ST3200822A (186.3GB)
CD-ROM/DVD : AOPEN CD-RW CRW2440 (CD 40X Rd, 24X Wr)
CD-ROM/DVD : PLEXTOR DVDR PX-708A (CD 40X Rd, 40X Wr) (DVD 5X Rd, 5X Wr)
Peripherals
USB Controller/Hub : USB 2.0 Root Hub
FireWire/1394 Controller/Hub : OHCI Compliant IEEE 1394 Host Controller
MultiMedia Device(s)
Device : MPU-401 Compatible MIDI Device
Device : Standard Game Port
Device : Creative SB Audigy
Device : Creative Game Port
Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)
Network Services
Adapter : Realtek RTL8139/810x Family Fast Ethernet NICFirstly, thank you for all your prompt responses, I really appreciate it. From the sounds of it, the PSU is ****
antec
From what I have read, the Antec PSUs have good reliability and ratings. I looked around and saw this one: Antec NEOPower 480W ATX PSU for around £65. I also went read that article posted by Dr Stu, which then stumbled on more articles about PSUs.
I have a couple more questions….
The rating of my system (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php) with all the components running came out to be 422W. So do you think that the Antec NEOPower 480W ATX PSU would be sufficient for the computer considering I might add more RAM in the future?
Or should I buy the 500W+ one then?
Does anyone know if the Antec PSUs are quiet? My current q-Tec one makes me feel I'm in an aeroplane.
lucky I read the forum!
I was in Maplins (computer shop) at lunch and thought, that shiny 650W Q-Tec looks nice and there looks like loads of power, that much do the trick. i got to the counter and thought.....let me wait, till i get home from work and read some more on the forum about this PSU issue.
Thanks god I didn’t buy that S***. having read some of the reviews, i would have wasted loooots of money for nothing. -
Duel Monitor Calibration with the NVIDIA GeForce 8800GT
I have ordered a Mac Pro with a NVIDIA GeForce 8800GT and would like to know whether it supports dual LUT's? I have also ordered two 30" ACDs and would like them both calibrated for photo editing work in Aperture.
Looked at the NVIDIA site but couldn't see the answer.
Many thanks...In short, no. The only way to get a LUT for each monitor is for each to have its own GPU. Having said that, I have the Radeon 1900XT driving 2-21" LCDs and have managed to get them really darn close with a good calibrator. If it's really important for you, buy a second card.
This is from the Nvidia knowledge base and the answer is the same for Macs.
+"Windows XP detects NVIDIA GPUs as a single processor even if the GPU supports dual monitors. This prevents the operating system from natively allowing two separate ICC profiles from being used on a single graphics card. This is not a problem if a user is running dual monitors and each monitor is running on a separate GPU.+
+Microsoft has provided a utility for users with two monitors running off of a single GPU who wish to calibrate both monitors. You may download this utility from the following URL:+
+http://www.microsoft.com/windowsxp/using/digitalphotography/prophoto/colorcontro l.mspx+ -
Will the Asus Nvidia GeForce GTX 650 work for prem pro?
Will the Asus Nvidia GeForce GTX 650 work in prem pro. The one in adobe's recommended list does not have an 'X' in the card description?
[Moved to Hardware forum.]
-
MSI Geforce 7800 GTX with MSI Nvidia GeForce 7800GT in SLI?
Hi. I bought the MSI Nvidia GeForce 7800GT a few months ago with the intention of buying a second to run in SLI. Now i can't seem to find anywhere that sells it at a decent price. Originally i bought it from www.ebuyer.co.uk but they have discontinued it.
Could i buy a MSI Geforce 7800 GTX and run it in SLI? They should have the same gpu and the specs aren't that different.Quote from: BG84 on 12-August-06, 23:42:56
what brand, where are you, how much?
MSI Nvidia GeForce 7800GT 256mb PCI-Express Dual DVI + TV Out
NX7800GT-VT2D256E
Not far from Birmingham
Price, really don't know. whats your best offer? -
MSI nVidia GeForce 4200 TI driver problem
Hi.. I really need your help guys..
First of all, I have Windows XP Pro.
Okay, I have this MSI nVidia GeForce 4200 TI card, and wanted to change drivers.
I had 50.xx, and wanted to change back to 40.xx, because it works better with Counter-Strike.
So, I went into Device Manager and went into the video card properties -> driver.
I pressed the 'Uninstall driver', because you need to uninstall the newer driver if you want to install an older driver.
Then my computer restarted, and when it was booting, a blue screen or something came up, with text about my computer was deleting and scanning some files(?).
I don't know what it was uninstalling excatly, but when I got into Windows I had to use a 'VGA driver' or something..
I tried to install the 40.xx driver, double clicked the Setup.exe but when it was begining to install this error came up: 'An error occured while launching the setup. (0x80040702)'.
I don't know what it means, but I can't install any drivers for nVidia?!
I tried the Device manager, and I can't update the 'VGA' ..
It's like my computer isn't recognizing the card or something.. I've tried 'Add new hardware' and everything.
Please help me!
Thanks in advance.
P.S. My PC specs:
Intel Pentium4 2.0GHz
Some IBM mainboard
512DDR
GeForce 4200 TI
Windows XP ProGenerally for nVidia drivers for the VGA, is what I explained above by going to Add Remove programs in control panel and look for the entry for nVidia display drivers.
Since you are asking me this, I fear you may not be at the experience level required to do this as it can be somewhat of a nightmare if all the drivers are not removed completely. This is what you just experienced.
Look at the top of this forum and you will se an Important thread called driver cleaner, by Bonz and then the one above it by me. Go to the DriverHeaven Website and download the DC utility but make sure you read EVERYTHING and understand it before you proceed. If you are confused or not comfortable, then I suggest finding someone that is experienced enough to do it for you.
It should be pretty straightforward.
Good luck -
MSI NVIDIA GeForce GT 640, 4GB 128-Bit DDR3 on my p7-1380t Desktop
I am looking for a new graphics card that will not require a new power supply and I was wondering if this one would work with my computer. I am not looking for any top of the line stuff and nothing too expensive either
MSI NVIDIA GeForce GT 640, 4GB 128-Bit DDR3
This question was solved.
View Solution.A-diddy, welcome to the forum.
If this is the video card that you want to buy, I don't believe that it will work with the existing 300W PSU. It has an additional power connector which means that it requires more that the 75W provided by the PCIe slot to operate properly. The specs say that it only consumes 45W. I don't know why they have an additional power connector. Your existing PSU does not have the required cable for the connector.
I suggest calling the manufacturer's Customer Service to verify the requirements are correct.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Does NVidia GeForce 8800GT have a heat problem?
I have an older heavy-duty Mac Pro running with 8-core Intel 3.2Ghz Xeon processors and 18GBytes RAM, using an NVidia GeForce 8800GT display controller driving a 30' Apple Cinema display. After the Mac Pro has been on for half a day the white semitranslucent bars start to appear and gradually the screen goes to nearly all white if I leave it on long enough. In about an hour after I turn it off, the display is fine.
What component is the likely cause of this behavior? I do not hear any fan noise. Should I?
I have seen other reports of heat problems with temperatures and fan speeds mentioned. How do I find this out for the Mac Pro? MacOS verion is 10.6.3.Less than 80ºC (load) is desired, but up to 85ºC may be seen. A good cooler would keep the processor down in the mid 60's to mid 70's under load.
Prolonged temps at and above the mid 90's will reduce component life.
Certainly temps over 100ºC would be terminal in the long run.
One would hope to see the card run between 50ºC at idle and no higher than the mid 80's under load.
Lower load temps (mid 70's) are better.......
The 8800 GT is getting old. Any card approaching or exceeding 5 years of use should have the thermal compound replaced.
All fan equipped graphics cards need to be kept clean and dust free. A dust clogged heat exchanger is almost as bad as no cooler at all. -
Fine tuning nvidia quadro k4000 to work with premiere pro cc
Would anyone know the correct settings for nvidia quadro k4000 to work with premiere pro cc please?
Currently it's only using 33% of it's full power when rendering, while the CPU is running @ 95%
Mercury playback engine GPU is selected.
Thank you in advancewhy would the encoder have the option to choose between mercury playback engine using GPU, or sofware encoding only!
From the article linked to earlier:
The video card and hardware MPE is not the holy grail. It helps in some circumstances to improve performance and rather significantly, but in other instances it does not help at all, as is indicated in the link above. People often think that installing a super fast video card will reduce export times by a significant amount of time. That is not true. It only helps in a limited number of situations. Keep in mind that:
Encoding to an export format is done by the CPU, not the GPU. No performance gain from a video card.
Frame rate changes, frame blending is done by a suitable video card, for instance exporting to 24P from 29.97i or 60P. Here there is a clear performance gain.
Scaling is also helped by hardware MPE, for instance going from 4K to HD or from HD to SD. Again a clear performance gain.
Rendering for preview is helped by the video card only for accelerated effects. -
MSi Nvidia Geforce 9500GT 1gb ddr2 doubt.
so here is the thing. i got this videocard a while ago and it has been working perfectly until now.
i have been trying to play Medal of Honor 2010 but the game keep freezing at randy spots. the thing is that i have been playing games like singularity and fifa 2011 without any kind of problems.
i have the newest drivers but idk what could be happening, the game just freezes.
here is my pc.
AMD Phenom x4 9650 2.3 GHz
MSi Nvidia Geforce 9500GT 1gb RAM DDR2
3GB Ram DDR2
Windows7 Ultimate.
can you peeps help me? :(test it in another machine
-
We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers DHi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Will a CP1518ni color laser printer work with airprint with my iPad?
will a CP1518ni color laser printer work with airprint with my iPad?
Hi Ijergen,
Yes you can use AirPrint as long as the printer is on the same network as the iPad.
You can also try Google cloud, I will be giving you links below on how to go about it.
AirPrint
http://www.apple.com/support/ipad/assistant/airprint/
Cloud print
http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
http://www.google.com/support/cloudprint/
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.
Maybe you are looking for
-
Ok, so I transferred some songs using my USB cable. Then, I checked my iPod, and it had spaces where there would be songs (ones that I had transferred from my laptop when I first got my iPod, so not bought from iTunes) but they were blank, so I compl
-
How do you change the page layout for number
When I print a spreadsheet I have created in numbers the header & footers are quite large. Is there a way to change the header & footer size?
-
How can I query and retrieve like that?
Hi all! When I read the tuning document of company, I found that some retrieved information about storages and machine. Because this forum does not allow to post message with attach file, so I demonstrate like that: Disk Device Disk Utilization (%) D
-
Question about scripting of foreign keys
When I script FK_SalesOrderHeader_Address_BillToAddressID key from AdventureWorks.[Sales].[SalesOrderHeader] I get this: ALTER TABLE [Sales].[SalesOrderHeader] WITH CHECK ADD CONSTRAINT [FK_SalesOrderHeader_Address_BillToAddressID] FOREIGN KEY([BillT
-
I've installed WinSCP and OpenSSH Client and OpenSSH Server and can't get it to log in, anyone got any suggestions?