Will my 27inch LED cinema display work with the 2014 MacPro?

I have two 27 inch LED cinema displays I bought in 2010 I think. I want to know if I can use both displays with the new cylindrical MacPro? My displays have mini display port connection and are non thunderbolt. I know that I cant daisy chain the monitors because they are NOT thunderbolt, but will I be able to connect both to the new MacPro's coming this December?

Thanks TurboStar for your excellent comments and suggestions. I have pre-ordered that Apple 27" LED Display now off Amazon.co.uk... it will be in stock on the 21st March.... and I look forward now with anticipation to getting my hands on it and more importantly my eyes... now that I have read your resounding approval of the 27" compared to my tired and jaded 30".
Interesting your comments about the new MacPro also... I think I went OTT when I bought my last 12 Core MacPro (32GB RAM + 512GB SSD)..... it cost me in total €8,800 ($12,200) which was mad money.... it's doing a great job.... but I don't work with video or video games, just Quark, Illustrator and Photoshop... so not sure if the 8 Core or less would have done the job just as good... I just wanted the best with what I thought was the most horsepower so I could take on any task. I will wait and review more with the New MacPro.... maybe the 6 Core is the way to go... and pump up the SSD and RAM....
Thanks again.
Regards,
Anthony
PS. Have a grrreat Paddys Weekend!!

Similar Messages

Will my LED 27 Cinema Display work with the new Mac Pro?

Will my LED 27 Cinema Display work with the new Mac Pro?

Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

Will any of my old displays work with the new Mac Mini

I am thinking of getting a new Mac Mini.     What I need to know is if any of the monitor/displays I have here can bem used.
I have two old video monitors I used to used with my old mac mini (Samsung Symc Master 770 and old little Princeton - VL158) , a
n early 2006 iMac 20" (which I don't think I could use as a monitor from what I read) and an little Samsung TV with USB and HDMI connectors.,
Can I use any of these?
Need new connector cords?   Mini-DVI to VGA adapter?
Thanks

I am a writer though and a photographer (strictly point and shoot) for a couple of orgs. I just don't want o run out of space. And I hate!! slow response time.
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly. May very well buc you more in the future.

Will my two year old 27 inch cinema display work on the new Mac Pro?

Im interested in purchasing a new Mac Pro later this month when unvieled. My question is....will my currentl "Apple LED Cinema Display" work with the new Mac Pro with Turbo Boost ports? My display is Model # A 1316.

Yes, you can.
http://support.apple.com/kb/HT3382?viewlocale=en_US

Will the Cinema Display work with an older MacBook Air?

My wife has an older MacBook Air (circa late 2009) with one USB 2.0 port and one Mini Display port. Will the Cinema display work with this model Air?

It looks to me like the cinema display is a DVI connection. If you have a MiniDisplay port to DVI adapter that connected the MBpro to the display then you have everything you need. (plus a DVI cable). The MDP adapter plugs into the Thunderbolt port of the MBair.

Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

If your computer does not have Thunderbolt you cannot use a Thunderbolt display. There are no adapters that will help.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Will LR5 benefit of graphic cards acceleration with the new MacPro ?

Will LR5 benefit of graphic cards acceleration with the new MacPro ?

Well, although LR5 is a great improvement of speed, the dev. team should try to work on MF files such as from the Pentax 645D… any speed improvement would be much appreciated, especially with dust removal and masking tools.
My actual configuration is not so bad, but I can't see how to get more speed from it :
MacPro 2 x 2,8 GHz Quad-Core Intel Xeon
RAM 18 Gb 800 MHz DDR2 FB-DIMM (2x1 + 2x2 + 2x3 + 2x4)
Mac OS X 10.9.1
ATI Radeon HD 2600 XT
ATI Radeon HD 5870 1024 MB
SSD Boot disk: SAMSUNG MMDOE56G5MXP-0VB - 256 Gb
Working Disk : 2 x Western Digital 3,5´´ S-ATA III 6 Gb/s Disque dur Caviar Green (WD30EZRX) - 7200 RPM, 64 Mo - Mounted RAID 0 - 6 Tb

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Will Analog Instruments ADXL330 triaxial accelerometer work with the SCXI-1531 input module?

I have an SCXI-1001 chassis and will soon be purchasing an accelerometer input module (SCXI-1531). I'm also investigating possible accelerometers to buy. Does anyone know if the the Analog Instruments ADXL330 accelerometer can be made to work with the SCXI-1531? Here is a link to the Analog Instrument's page about the device:
http://www.analog.com/en/sensors/inertial-sensors/adxl330/products/product.html
Thanks!

Hello,
The output voltage and current levels are within specification of the module, the only concern I have is interfacing between the IC chip and the BNC connections on the 1531. If you have a way to effectively connect the pins to BNC connectors and connect that to the module, then it should work. Are you using the module's excitation source as well?
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

Will Plantronics Voyager 510 bluetooth headset work with the latest macbook

i just received my latest new macbook last week and am considering buying the Plantronics Voyager 510 bluetooth headset for all voice communication over yahoo, ichat or skype (current version of skype has problems with leopard firewall, i hear skype guys are working it out to release a fixed version). So can someone tell me if they tried successfully using a bluetooth headset with the latest intel mac that ships with leopard?
I am posting this new question after having read about the skype bluetooth headset threads on which i could not figure out the answer!
Any help is appreciated!
Thanks, neil

Please see the "Voice Mail doesn't work with Bluetooth" item, as it would appear that some of the headsets do work, some don't. My Plantronics 520 no longer works with the Voice mail, but works with everything else. I have an old Motorola bluetooth (850) however, and it both works for calls, and is seen by the voice mail.
By the way, this reference is to stay tuned, as the issue has not been resolved, but there are plenty of responses there, so you're not alone with Plantronics compatibility. Hopefully volume of issues will get priority on software fix.

Will HH(Black) BB Talk Phone work with the new AD...

Hi
hopefully moving over tomorrow to the new up to 20Mb connection.. question is ..will the HH phone work with the new router that Bt have sent out for the new connection ? Doesn't appear to be anywhere to connect to the new router like the HH which you can connect it to on the front .. so can it connect wirelessly using the power adapter ??

None of the BT HH phones will work with the 2700HGV.
You will need to get a standard wired or wireless phone and connect it to the phone port on the 2700HGV with the included adaptor, then activate BBTalk on the 2700 HGV. Here's the link to the activation help:
http://bt.custhelp.com/cgi-bin/bt.cfg/php/enduser/cci/bt_adp.php?p_sid=z_6Y-FXj&p_faqid=9916&cat_lvl...

Will Apple Cinema Displays work with Directv?

Hi everyone, I have a 23" Cinema Display, the model before the aluminum casing. Now what I'm trying to do is watch Directv on the ACD through the hdmi/dvi output of the directv receiver. I understand I will need an ADC to DVI adapter for my model display but I'm already planning on getting one since I will be connecting my macbook pro to the display.
So has anyone tried this out and can say this will work fine? Or will the picture be distorted, colors off, incorrect signal, etc? If it works fine, I will buy a dvi switch so that I can use the display for my computer and television.
I know there is Elgato's EyeTv hybrid out there but this option will only allow me to watch OTA HD and every directv channel in sd. I already have the directv hd package in my house but do not have a tv in my room at the moment.
Thanks a lot.

As far as I know this won't work for at least one reason and possibly two. For one, Apple Cinema displays are very picky about the input that is passed to them. In fact, the 23" ACD will run from one, and only one, format, which is 1920 x 1200 at 60Hz. This is not a standard for consumer devices like satelite TV boxes, so the DirectTV will not be able to output this resolution.
The second reason is that the HDMI output from the DirectTV will likely expect an HDCP handshake from whatever display is attached. ACDs are unable to provide this.
There may be products from Gefen that will allow you to interface the two, but I'm not sure about that.

Does the cinema display work with windows

Hi last year i got a new acer laptop and found the screen was much to small for all the windows i work with so i connected it to an external screen that i had just a week ago it stopped working and i was wondering if the cinema display would work with my laptop

Here's some interesting links that might help:
Boot Camp Software Update 3.2 for Windows 64 bit
Apple Cinema Display 27”on Windows
LED Cinema 27" with Windows 7 (Apple discussions thread)

Why won't my 20" cinema display work with an HP laptop / Vista

I have my 20" cinema display connected to my hp laptop (using vista) under hardware, and a few other places it shows that the monitor is detected, but I can't get a picture to show on the monitor no matter what I do. It stays black, even though it is detected. Has anyone else had an experience with this?

the option(s) that it gives you are the recommended resolutions as determined by the "handshake" that happens between the monitor and computer (sort of a pre-UPnP standard). you can always press the advanced button and then manually select any resolution / display rate that your graphics card is capable of displaying.
what was the option, by the way? what resolution and display rate?
the resolution should be 1680x1050 and the refresh rate can probably be anything from 60 to 80 Hz.

Will my 27inch LED cinema display work with the 2014 MacPro?

Similar Messages

Maybe you are looking for