Will my data be in roaming in the florida panhandle? i am on an alltel plan from north louisiana

i was with alltel when verizon bought it and though i tried to change to verizon plans twice at contract renewal i am still on my original alltel plan and coverage area which results in roaming charges when i leave north louisiana or south arkansas and sometimes through system glitches when i don't go out of area

BUT, you are a Verizon customer on an old Nationwide Plan from Alltel? If this is correct, then as a Verizon customer you are pretty much good all over the panhandle and based on the coverage map, good as well. I was Alltel till ATT bought out half the state and Verizon bought the other half of the state as far as Alltel goes. The point is, are you a Verizon customer? I don't get why you couldn't change plans if you are a Verizon customer.

Similar Messages

Will my data be saved after formating the source computer?

If i got a new computer, after I Sync Firefox, can i delete the source (format the old computer) and still have the data on the new one?

Yes. Just make absolutely sure that your new computer has everything you want on it before formatting your old one. I'd recommend checking your Firefox bookmarks and saved passwords thoroughly just to be sure everything was synced over.
Note that Sync doesn't sync everything. For example. it doesn't yet sync up what addons you have installed, though this is planned for some future version.

My IMac is frozen and will not allow me to get to the desktop screen. How can I stop it from freezing?

My IMac is frozen. When I power up it will only take me to the white screen with the apple on it. I cannot get to the desktop screen. Any help in fixing would be very much appreciated. Thanks Pete

That's an ongoing problem with this recent version of iPhoto as you can see from the topics at the right under "More Like This". The workaround that works for all is to export the photos to a folder on the Desktop and upload to Facebook with your browser until a fix is found.
Report your problems to Apple via http://www.apple.com/feedback/iphoto.html
OT

Lightroom will not launch and comes up with the following message "Lightroom encountered an error when reading from its preview cache and needs to quit". Lightroom will attempt to fix the problem next time it launches, except it doesn't fix and I now can

Can anyone help with the above problem?

Here is your fix: Lightroom says my preview cache is corrupted—how do I fix it? - The Lightroom Queen

What is wrong with the Verizon Wireless network in the Florida panhandle. Can't make or receive calls. This is bad for business owners who rely on phones.

It's amazing, I can call Verizon on my cell phone but nobody else how aggivating> They said this only effects prepaid phones nation wide. They are working on restoring service, said it would take around an hour to get things working again.

Having service issues are no fun Pookstar1969. I can understand how frustrating this is. I can check for any issues in the area. Whats your zipcode and phone type? Are you having issues with prepaid or postpaid service? I look forward to hearing from you.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

HT3235 Can i back up data of my computer in the shared drive via airport extreme

Can i back up data of my computer in the shared drive via airport extreme

If you delete it from the computer, it may eventually be deleted from the backup.
See "additional information" here: http://support.apple.com/kb/ht1427

TS4020 "cannot get mail" The connection to the server failed. My mail account from Icloud will work if I only disconnect my wifi in my iphone and use internet plan from carrier. Anybody else with this proble??

My mail account from icloud will work if I only disconnect my wifi in my iphone and only use internet plan from my carrier. Anybody else with this problem??

I've been having the same problem since iCloud appeared and complicated an otherwise trouble-free system. Doubling frustrating is that iCloud duplicates my .Mac account so I get two of everything in my Inbox. I turned off iCloud and now mail at least goes out but I can't delete the duplicate account.

How can I use international data on a prepaid sim (not vzw roaming) with the Galaxy s3?

This has been incredibly frustrating. I am in the middle of a trip to Europe. Before I left, I confirmed with VZW CSR's that my s3 LTE phone is fully unlocked and that I could buy a local sim and use it while in Austria.
Aside -- I can't use VZW global services on their network -- cost notwithstanding -- because I hit some device limit when I bought my wife an iPad, and VZW required a deposit for it. No big deal, EXCEPT that here three months later I learn that VZW accounting prohibits global roaming if you account has a deposit. So fine, VZW doesn't want me to pay them a dollar a minute and $20/100MB. No problem, I can get a drei (3) prepaid card for 10 euros that has 1000 minutes and 2 GB of data.
So, I do. I activate the card, and voice and sms work fine. No data. No joy.
Step 1. I call samsung. Samsung, after about an hour of claiming it should work, decides that it is because VZW has some sort of software block. Not surprising, since the software is actually from VZW.
Step 2. Call VZW. After a great deal of **** VZW says you have to go back to the drei store.
Step 3. Return to drei. Store rep discovers VZW software will not recognize their access point name (APN), and will not let you enter it. They verify on a different s3 that the sim is fine. With my VZW sim, I can see the VZW APN's, but because I don't have global services turned on, no joy.
Step 4. Do some web digging. Discover that this APN thing is a known bug. Web sites (like the CSR in the transcript) suggest rooting or jailbreaking is the only workaround -- which I don't want to do. But here I sit in Austria, with no data on a top of the line VZW phone and an account with seven different lines.
So, how do I resolve this? Take the phone back, because there is clearly a defect? But if it's software, I'll have to get an escalation to get a different phone. Is there a fix? Sue for false advertising? Better yet, start a class action -- there sure seem to be a lot of us in this boat based on web searches.
<< Transcript removed to comply with Verizon Wireless Terms of Service >>
Message was edited by: Verizon Moderator

OK, I have to throw VZW some props here. I went to the store where I bought my phones, and explained the problem I was having with international travel and the s3. The store put me into an iphone5 for free as a warranty exchange -- apparently they know the APN issue is a serious one and they said there was a big lawsuit about it. It cost me a bit for power adapters and such, and a few paid apps, but the iphone has (reportedly) no issues with international travel and local sims.
Way to go, VZW. Mark this one up for responsive customer service.

Any time I open a photo program the application freezes. I want to reinstall OSX from the original disk and then restore my machine from time machine Will a restore from time machine only restore my Apps and data

Tried to post a question about restoring my i mac from time machine, but this new format makes no sense to me. I want to restore my i mac from time machine after I reinstall the OS from the original disk. Will a time machine restore only restore the applications and data or will it restore the current state of the OS. My machine will not let me open any photo applications (aperture, I photo, NX 2) I have to force quit them every time I try to get some work done.

06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

HT4203 will i be charged if i leave the cellular data on but also keep the wifi on as well?

will i be charged if i leave the cellular data on but also keep the wifi on as well

When wifi is being used your phone will not use cellular data. When wifi is no longer being used (ie out of range, wifi is turned off) then your phone will use cellular data.

If I configure a buffered pattern input and a buffered pattern output on the 6534 to both operate from the internal clock, will data be transferred out on the same rising edge as data is transfered in or are there two separate oscillators?

Basically, I want to perform a buffered pattern output synchronously with a buffered pattern input. If I configure the two groups to be internally timed from the same frequency, will the data in be transferred on the same edge as the data out or will the two groups use different oscillators?

Hi Joseph,
There are two clocking structures on the 653x boards, one for each group. This means, even if you specify the exact same frequency for both there is no guarantees that they will be synchronized exactly.
The workaround for synchronizing both groups is to have 1 group clocked internally and 1 group to be clocked externally. Then route the Req line from the internally clocked group to the Req line of the externally clocked group.
Hope that helps.
Ron

Will my data be in roaming in the florida panhandle? i am on an alltel plan from north louisiana

Similar Messages

Maybe you are looking for