Will my Halo Aids work with iPhone 6

I Just got Halo aids. love them. however my iPhone 5's battery is junk, will my aids work with the iPhone 6 or do I need to wait for trulink to be upgraded?

From an e-mail I received earlier today from the local Starkey rep:
"As previously communicated, we have confirmed compatibility with iOS 8 and Halo™ hearing aids.
With today’s release of iPhone® 6 and iPhone 6 Plus, we have embarked on rigorous testing for hardware related issues. Preliminary indicators are iPhone 6 and iPhone 6 Plus should not be used. Connection between iPhone 6 and 6 Plus and hearing aids is not robust and users will experience frequent and inconsistent connectivity issues.
iPhone 5s, iPhone 5c and iPhone 5 remain compatible and are the recommended phone for Halo users. We strongly recommend patients do not update to iPhone 6 and iPhone 6 Plus until the issue is resolved.
We will provide further updates to you in the coming days."
Ergo, don't go with the iPhone 6 yet. I have a couple of additional batteries for my iPhones (mostly from Mophie). That might be a solution for you short-term.

Similar Messages

  • Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    You can setup an Airport device using the Apple Airport Utility for iPhone
    Download it for free in the App Store on your iPhone...
    It's under "Utilities" and the "Top Free" utilities.

  • Will any iPod charger work with iPhone

    Does any (Apple) iPod charger work with iPhone? I would like to charge the phone in different places without carrying the wall charger with me all the time. I got my regular iPod charger and was hoping that I can use it. I noticed that the wall charger that comes with the phone has a lower amp rating than the iPod charger I have. I would think this shouldn't make a difference unless everything else (e.g., the connector wiring) is the same.
    Does anyone know for sure?
    Thanks
    Dirk
    PC   Windows XP Pro  

    I believe so. Check this link http://www.apple.com/iphone/questionsandanswers.html scroll to the section Accessories for iPhone and read the first one.
    I'd imagine if there was a problem they would have mentioned it. Also, if it makes you feel any better, I've been using iPod charger to charge my phone and so far it's been working fine.
    -Pramod Anchuparayil

  • Will Garmin 360 GPS work with Iphone 3g Hands Off

    Please advise.
    Thank you,
    Lee

    the 360 works with my first gen iphone, don't know why it wouldn't with the 3G....

  • HT4526 will my phonak hearing aids work with iphone 5

    a yes or no

    YES! Mine work like a charm through the Streamer - only problem is a slght delay which causes me to miss the first ring tone while the streamer is connecting to the hearing aids.

  • Will motorola elite sliver work with iPhone 4

    i am thinking of upgrading from a motorola droid phone to iphone4 will my elite sliver blutooth device work

    You can setup an Airport device using the Apple Airport Utility for iPhone
    Download it for free in the App Store on your iPhone...
    It's under "Utilities" and the "Top Free" utilities.

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • Iphone will not charge via usb-to-computer nor via brick; I've tested with two different cables. Just before this problem arose, I got messages similar to "This accessory is not made to work with iPhone."

    Most of my concern is in the subject line. I probably should've saved some content to include here. Allow me to elaborate:
    While traveling with the tiny brick, I got a message on my 3GS phone that "This accessory is not made to work with iPhone”; however, the charger was working fine with another phone and with an iPad.
    I tested alternatives by removing and re-inserting the cable (obviously, as I tested other devices), changing wall receptacles, shutting the phone off (all the way), all to no avail.
    When I got home, I plugged a different cable--one that was connected to my iMac rather than the brick--into the my 3GS; it still didn't charge.
    So, I'm hypothesizing that perhaps some debris (from a pocket?) got into the charging receptacle of the 3GS and is disrupting the connection. Perhaps there are other hypotheses.
    I am reluctant to do a reset, as (a) the problem doesn't appear to be a software issue (the phone and software are all working, though the charge is declining) and (b) I don't want to lose the contents before I can sync it (now that I'm home, again).
    I'd welcome suggestions. Meanwhile, I suppose I shall e-mail photos and notes from the phone to myself before I lose the remaining charge.

    Try to clean the 30-pin receiver slot either by blowing air into it or using a microfiber cloth. If the problem persists, based on what you've already said, I'd say the problem is most likely hardware, and would need to be replaced or repaired. I hope your iPhone is still under the 1-Year Manufacturer Warranty, or if applicaable extended warranty. You can check by calling AppleCare National iPhone Technical Support at 1 (800) 694-7466.

  • "This accessory is not made to work with iPhone"

    I have a first generation iphone. It recently started showing a message that reads:
    This accessory is not made to work with iPhone
    Would you like to turn on Airplane Mode to reduce audio interference?
    You will not be able to make call during this mode
    YES NO
    There is no accessory in the phone. Any thoughts on how to stop this behavior?
    I tried reloading the OS and it didn't help.

    I was having the same problem and it was draining my battery! After reading a couple of threads I was resigned to take my 1st gen iphone to the genius bar to see if they could do something. Before going to the bar I took off my pics, videos, movies, podcasts, and some applications in preparation for my visit. That night the problem stopped. This had been happening for about 3-4 weeks so I could replicate at will. After removing things from the phone when I tried to replicate the problem it would not happen. So I then started to re-sync things one at a time. After re-syncing everything but the applications I still could not replicate the problem. My feeling is that one of the applications, or combinations of, was causing the issue. I have not re-synced all the applications at this time because I am happy to have my phone back. Hope this helps.

  • Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Until it "Works With iPhone"

    While you're waiting for those "Works with iPhone" 3rd-party devices to show up on the shelves, these two suggestions may help (#2 is the big one):
    1) By now you've probably figured out that you can make almost any headphone plug fit the iPhone by removing about a 1mm ring of plastic or rubber with an X-Acto knife. If you don't trust your surgical skills on that $200 pair of headphones, buy a cheap headphone splitter and modify it instead, then plug your headphones into it.
    2) If you've given up on your powered speakers or FM-transmitter because of the squeaky noises, try this: Radio Shack sells a "Ferrite Data Line Filter", Part Number 273-105, for under $6. It's a little plastic box that snaps around your cable and blocks most (maybe not all, but most) of that GSM squawk when your sweetheart calls or your phone is just trying to find a new tower. The filter needs to be near the iPhone end of the cable. If you build up a little section of the cable with foam or tape to about a pencil diameter, the box will grip and not slide. If you loop the cable through twice, you won’t need the padding and the loop may actually improve the filtering.
    I tried this on a road trip from Atlanta to Richmond and only really noticed the GSM buzz while I was passing through downtown Richmond. Something about signals bouncing around between tall buildings, I suppose. For most of the trip it worked great, and even in downtown Richmond the buzz was greatly reduced. It’s still a good idea to keep the phone as far away from the radio or speakers as possible.
    This device is available at most, but not all, Radio Shack stores. Go to the Radio Shack website and they will tell you which store near you carries this part number.
    Combining suggestions 1 and 2: If you attach the filter more or less permanently to a headphone splitter, you will have a removable filter that your friends can check out on their iPhones.
    Caveat Emptor: This may not work for everyone. If it doesn't, you're only out six bucks, and it won't harm anything.
    Enjoy!
    -Peter

    While you're waiting for those "Works with iPhone" 3rd-party devices to show up on the shelves, these two suggestions may help (#2 is the big one):
    1) By now you've probably figured out that you can make almost any headphone plug fit the iPhone by removing about a 1mm ring of plastic or rubber with an X-Acto knife. If you don't trust your surgical skills on that $200 pair of headphones, buy a cheap headphone splitter and modify it instead, then plug your headphones into it.
    2) If you've given up on your powered speakers or FM-transmitter because of the squeaky noises, try this: Radio Shack sells a "Ferrite Data Line Filter", Part Number 273-105, for under $6. It's a little plastic box that snaps around your cable and blocks most (maybe not all, but most) of that GSM squawk when your sweetheart calls or your phone is just trying to find a new tower. The filter needs to be near the iPhone end of the cable. If you build up a little section of the cable with foam or tape to about a pencil diameter, the box will grip and not slide. If you loop the cable through twice, you won’t need the padding and the loop may actually improve the filtering.
    I tried this on a road trip from Atlanta to Richmond and only really noticed the GSM buzz while I was passing through downtown Richmond. Something about signals bouncing around between tall buildings, I suppose. For most of the trip it worked great, and even in downtown Richmond the buzz was greatly reduced. It’s still a good idea to keep the phone as far away from the radio or speakers as possible.
    This device is available at most, but not all, Radio Shack stores. Go to the Radio Shack website and they will tell you which store near you carries this part number.
    Combining suggestions 1 and 2: If you attach the filter more or less permanently to a headphone splitter, you will have a removable filter that your friends can check out on their iPhones.
    Caveat Emptor: This may not work for everyone. If it doesn't, you're only out six bucks, and it won't harm anything.
    Enjoy!
    -Peter

  • HT4059 Will iBook Author books work with an iPad 1?

    Will iBook Author books work with an iPad 1?

    Look at these.
    http://bluemic.com/snowball/
    http://www.lifeisaprayer.com/articles/photography/iphone-4-ipad-external-mic-aud io-input
     Cheers, Tom

  • Does the Nike Kit work with Iphone 3G?

    I was wondering if the Nike kit will work with Iphone 3G? I have seen it is suppose to work for Iphone 3GS but it says nothing about other generations or 3G. Thanks!
    Message was edited by: fallenstarry
    Message was edited by: fallenstarry

    okay thanks! I guess it's because 3G does not support flash!

  • Please Help "This accessory is not made to work with iPhone" iPod??

    Hiya i wondered if someone here can help me please.
    Today i went to play my ipod feature on my iPhone and it started playing on the iPhone speakers which i wanted, Then all of a sudden it stoped i checked it out and had an error message saying the following.
    "This accessory is not made to work with iPhone
    Do you wish to switch to aeroplane mode
    YES/NO"
    There is no accessory connected to the phone and also it has not been in contact with water which i heard sometimes triggers this error.
    When i press the NO option the volume cuts out and the volume slider disapears on the ipod and also the volume buttons dont work.
    I dont really want to factory restore it but if thats my only option then i will do it. Also i have only had the phone for less than 20 days.
    Any Help/Advice is really apprieciated.

    Check your iPhone's dock connector port for any dirt, lint, or foreign material, and it doesn't take much.
    If clear, the standard troubleshooting steps in order are power your iPhone off and on, an iPhone reset - which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, restoring your iPhone with iTunes from your iPhone's backup, and restoring as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, you can call AppleCare or make an appointment at an Apple store if there is one nearby.

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

Maybe you are looking for

  • Extended Transport Control

    I just implemented Extended Transport Control for my Transport Domain, which consists of DEV-100, DEV-111, QAS-200, QAS-220. Now, it asks me to set the 'target client' for all the transports that are already imported.Without setting the target client

  • Im locked out of my phone... how do i reset it from my computer ?

    i need to know how to reset my phone from my computer...please

  • Terminate workflow programmically

    Hi, Is there any way to terminate an active workflow from an ABAP program? My requirement is to check for some condition and if its is satisfying, terminate a workflow which is in waitinf state. Any pointers will be highly appreciated. Thanks in adva

  • Assets given to vendor for hire basis

    HI guru's How to configure the above scenario? My client provides assets to the vendor and collect rent from them? So i think this can be done by creating a rental contract with the vendor? regards

  • Saving the data through subscreens

    Hi, I have created a dialog program in which there is a tabstrip with 3 tabs in it.On the main screen I have the school name.In the first subscreen of the tabstrip there is school details,in the second tab there is teacher deails and in the third tab