Will my iPhone get reception with airport extreme?

I live out in the sticks, and do not get iphone reception out here. I was told that airport extreme would act like a 'hot spot', and I would have cell reception. Is that accurate at all?

The AIrPort Extreme will not provide cell phone coverage, if that is what you are asking.
If someone is talking about some sort of an adapter that would connect to the wireless router to provide a cell signal, we'll need to know a lot more about what that device might be....including the manufacturer, model number, links, etc to offer any further opinions on whether it might work.

Similar Messages

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Can't even get started with airport extreme

I have 2 windows vista computers on a Dlink router to a cable modem provided by my ISP. All of this is on the second floor of my house.
I want to be able to play airtunes via airport express downstairs with my stereo speakers. I could never get airport express to do this alone so I went to a retail store and was told by the MAC salesman I needed an Airport Extreme.
I tried connecting my airport extreme via ethernet cable to my router and got a flashing amber light. I followed the instructions but now airport utility will not even recognize the airport extreme not to mention that I haven't even been able to add the airport express.
I basically need help from step 1 as well as an overview of how I will be doing this.
Thanks

Hello cturnerlewis. Welcome to the Apple Discussions!
To be able to stream via AirTunes to the AirPort Express Base Station (AX) downstairs the AX just need to join an existing wireless network. If you current D-Link router is wireless, then the AirPort Extreme Base Station (AEBS) was NOT necessary. However, I will assume that it is not.
What you will want to do, in a nutshell, is the following two things:
1. Set up a wireless network with the AEBS, and
2. Configure the AX to join the AEBS's wireless network.
Here are the basic steps for both ...
Step 1: 802.11n AirPort Extreme Base Station Setup (AEBSn) w/Cable Modem
Perform a "hard" reset of the AEBSn.
o (ref: http://docs.info.apple.com/article.html?artnum=107451)
Modem/Router Power ReCycling
o Power-off the Cable modem, AEBSn, & computer(s); Wait at least 30 minutes.
o Power-on the Cable modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
Setup the AEBSn
Either connect to the AEBSn's wireless network or, temporarily, connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
AirPort - Base Station
o Base Station Name: <whatever you wish or use the default>
o Base Station Password: (optional)
o Contact: (optional)
o Location: (optional)
o Set time automatically (optional)
o Time Zone: <select your time zone>
o Status Light: Always On (Default)
o Allow configuration over Ethernet WAN port (unchecked)
o Advertise configuration globally using Bonjour (unchecked)
AirPort - Wireless
o Wireless Mode: Create a wireless network
o Network Name: <whatever you wish or use the default>
o Allow this network to be extended (unchecked)
o Radio Mode: 802.11n (802.11b/g compatible)
o Channel: Automatic
o Wireless Security: None
Internet - Internet Connection
o Connect Using: Ethernet
o Configure IPv4: Using DHCP
o IP Address: <provided by your ISP>
o Subnet Mask: <provided by your ISP>
o Router Address: <provided by your ISP>
o DNS Server(s): <provided by your ISP>
o Domain Name: <provided by your ISP>
o DHCP Client ID: (optional)
o Ethernet WAN Port: Automatic (Default)
o Connection Sharing: Share a public IP address
Once you have verified Internet access, I strongly suggest that you use wireless encryption (WPA or WPA2) to secure your network.
Step 2: AirPort Express Base Station (AX) - AirTunes Setup
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing AEBSn's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Will cables CAT6a (Shielded Twisted Pair) work (will the grounding work?) with Airport Extreme (5th and 6th generation) ? I can see a little metal edges on the Airport Extreme 6th generation, is that the grounding for STP CAT6a cables?

I recently had to change the cabling for my house and since I would have to buy all new, I used CAT6a cables, and I noticed that they are all Shielded Twisted Pair (STP), which meand that they have an extra layer of protection against interferences. The RJ45 Connectors are all made of metal on these cables.
The main router in my house will be a 6th generation Ariport Extreme, and I noticed that on the Airport Connectors, there are to metal edges on the RJ45 female. Is that the groudinging for the STP cables? I noticed the same metal edges on the Airport Extreme 5th generation.
Thank you,

Yes, but the power cable on the AE has no gnd pin so there is no actual grounding.. cables should only be grounded at one end anyway.. but the metal tabs are linked to the metal frame of the AE or TC..
At least in all the models up to AC .. it is still out of my reach cost wise. As I would have to pull it apart and plug my meter in there.. still they will eventually start coming in for repair.

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

HT4865 if you have an ipod & you back it up with icloud, will your iphone get notified?

Basically I just want to know if you have an iPod & you back it up with iCloud , will your iPhone get notified of this?

You won't receive a notification, but if the iPhone is signed into the same iCloud account as the iPod, you can go to Settings>iCloud>Storage & Backup>Manage Storage. Here you will see the iPod Backup listed under Backups if it has one. You can tap the iPod and it will tell you when the last backup was completed.

17" flat panel Mac can no longer get on my Airport Extreme network

My 17" G4 flat panel iMac can't get on my Airport Extreme network. It has been on the network for years. All of a sudden I can't get on my own network. The Airport extreme uses a WAP2 Security password. Everything else in my home is on this network ie. Blu-Ray players, Wii, Nintendo DS's, MacBook, Apple TV. The G4 doesn't even have WAP2 as an option! Where did the option go? I really don't wanna set up the network again with a WEP password(That's an option on the G4) and have to reset everything. What happened?

There were two 17" flat-panel G4 iMacs. The earlier of the two (Part# M8812LL/A) had an optional AirPort Card. This card only supports 802.11b and either the WEP or WPA security standards. It does not WPA2. This may be the reason the G4 is not able to connect to your wireless network if you have it configured for WPA2 Personal.
You will need to reconfigure the AirPort to use the "WPA/WPA2 Personal" option.

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

Help! iMac would not Connect/Find with Airport Extreme

Strange issue. I used to connect my Airport extreme with iMac, until recently iMac could not join with aiport. Instead my iMac connected to my neighbor's network. I'm using Time Warner cable.
However, my MBP and my Dell laptop could connect to my airport. Any ideas what could interfere with my iMac? I already called the Tech support and even went to the Apple store, they all said is the iMac since the iMac was able to connect with all the airports at the store. The tech support suggested me to move my airport to a room with less interference. Is that right? the iMac or the airport should I move?
We spent 2 hours, resetting back to factory setting and still iMac could not join Airport Extreme.
Any suggestions or advices are appreciated.
Tom
iMac Mac OS X (10.4.10)
Mac OS X (10.4.10)

Thank you for your e-mail, Duane. Yes, the airport express (hooked up to my stereo in the dining room) does receive iTunes from my G5 in the office. The light is a blinking yellow, but it still receives the signal.
Last night, I was able to get an internet signal on my eMac (with airport extreme card installed) from the VersaLink router that my G5 uses in the office!
I figured out that the eMac and G5 were obviously not communicating with each other, and went to the Airport icon on the top of both screens to make sure that the Location Names were correct. I discovered that I needed to change the G5 from the Airport Express Location (stereo)to the name of the eMac location (Master Bedroom). Then I got the network connection. I suppose to play iTunes to my stereo, I will have to change the location, again, right?
Another comment: I was rather amazed that, after at least an hour and a half phone conversation with three different technicians, no one came close to this solution. And I'm paying for technical help (two years left on a three year contract)! Evidently, it is not common knowledge that a wireless router and an airport extreme card with mini-antenna can communicate? I came close to buying an Airport Extreme Base Station because I thought that I might need it!!!
So, I'm thinking I'm in the right ballpark but would welcome any more comments.
Thanks for listening.
Dave

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Automatic backups more on Drobo with Airport Extreme

Sure you can as I continue to help with your good type, with a similar problem though.
Silk for about 1 week alone makes my iMac 24 inch no automatic backups more on Drobo with Airport Extreme version 7.6.3 Connected via a USB cable. Went up a few weeks ago Actually getting rid of problem with the backup from Time Machine program of MAC OS X version 10.8.3.
I take a can further help me secure forgive me my english is not my native language.

The Timed Access settings in AirPort Utility will allow you to control "who" connects to your network and "when" they can connect.
AirPort Utility >Click AirPort icon > Edit > Network tab > Enable Timed Access
For more information, click the Help menu at the top of the screen
Click AirPort Utility Help
Click Setting up a WiFi network,
Click Control when a user can access your network, and also
Click Control access to your wireless network.

I'm looking for a list of printers compatible with Airport Extreme

My existing HP printer is not compatible with Airport Extreme and I want to be able to print from all of my Apple devices. I'm looking for a new photo quality printer / scanner / copier which will work wirelessly with all my devices.

Sorry, but there is no "official" list of printers that Apple provides that indicate which are fully functional with the AirPorts. One "unofficial" list has been maintained by iFelix and may be worth taking a look at.

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Scanning with Airport Extreme

Just set up my new Airport Extreme, printing is working fine but I can not scan. Is scanning supported with Airport Extreme?
MacBook Pro Mac OS X (10.4.9)

from looking through the discussion forum more closely I found that is probably the issue...printing only and no scanning. A bit of a disappointment as I do a fair share of scanning. Seem interesting to have to wire-up for a function when wireless is so convenient.
Anyone think that this will change?

Will my iPhone get reception with airport extreme?

Similar Messages

Maybe you are looking for