Will my iPod 5G Touch work with the new AppleWatch?

Hi,
I don't own an Apple iPhone 5, 5S, 6, 6+ but only my iPod 5G Touch.
Will the new AppleWatch sync with my iPod 5G Touch in anyway?
If not, I might still buy the AppleWatch in hopes that if the rumor of a newer iPod 6 comes in the fall of 2015, then it would almost for sure pair with the AppleWatch. (Please rumor come true!!!)
If not, then what can I still do with the AppleWatch without buying (yet?) the iPhone 5 up to the iPhone 6/6+ other than tell time?
Thanks for any responses in advance!

Okay, good thoughts given. Yes, I didn't think about the iPad's. Apple is smart, they want us to buy up to the newer products. Though in some ways, they are absolutely right because of the improvements they have done 'for us'. I came sooooooo close to ordering the AppleWatch the first hours they started pre-orders, but... I knew I wasn't (really) ready for it until I buy the new iPhone 6 (my choice).

Similar Messages

Will a ipod nano charger work with a new ipod touch?

will a ipod nano charger work with a new ipod touch?

If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

I have a new mac book pro. Will my old jam packs work with the new garageband?

I have a new mac book pro. Will my old jam packs work with the new garageband?

I have same problem, been using a macbook 13" for nearly 9 years but it was failing so I bought a macbook pro 15" and after having problems and error messages when trying to download loops ( I finally went to the App Store and opened garageband from there which install some loops), it finally downloaded some but not all the loops that my jam packs had, also I have tons of non-apple loops that I purchased over the years but I want to know if they will work on my new mac ?
macbook pro 15"- 2.3ghz - 8gb- 2TB

Do both of Apple Store's iPod power adaptors work with the new Touch 2G?

Hi,
Many thanks in advance for your attention.
Looking to to get an Apple USB power adaptor for the iPod Touch 2G.
In the Apple Store, two are listed, one smaller (and newer) than the other. In the newer one, the prongs are not retractable; in the larger (older) one, they are.
1. Does anyone know if the larger (and older) power adaptor works with the iPod Touch 2G USB-only interface?
2. I know that many power adaptors and speakers and car adaptor sets, etc. in the past had a combo Firewire/ USB power interface. That is why the new iPod Touch 2G (or iPhone 3G) does not charge up or power up with these speakers and chargers, etc. (Speakers such as the original Bose Sound Dock).
3. Is it true that the older (larger) power adaptor works better in all kinds of power situations (different outlets, etc. in different countries); that the older (larger) power adaptor is more travel-versatile? The Apple store perhaps notes a difference, noting that the newer power adaptor works only with USA-style outlets. I see no such note with the older adaptor.
4. Finally, does anyone know of a USB-only interface that would work with the iPod Touch 2G that is not Apple's (and perhaps not as insanely priced)?

Many thanks for further clarifying.
I don't know 100% for sure that the Apple USB cable for the iPod Touch is different than the Apple USB cable for the iPod Touch 2G.
But:
I have read (somewhere) that the tiny pin connectors are different. That is why an iPod Touch 1G could be charged by (for example) a Logitech mm50 Speaker set and an iPod Touch 2G cannot.
An iPod Touch 2G can still connect to the Logitech mm50 Speaker set. It will still play and you will hear music. But it is no longer charging. And I have read of iPod Touch 2Gs getting very hot in these cradles. That can't be good for the poor iPod in the long run.
So for the Apple USB power adaptors to work, (which both came out before the iPod Touch 2G), they must have some override or blocked pin if they can work with both generations of iPod Touches.

HT2948 Will Final Cut Express 4 work with the new Canon XA10 AVCHD ??

I'm in the process of shopping for new cameras for my students. We edit on Final Cut Express 4 HD. I want to buy the Canon XA10camwras which record to SD cards. I keep reading AVCHD video and am new to the technology. The B&H website says this camera :
Product Highlights
1/3" CMOS Sensor
Native 1920 x 1080
24Mbps AVCHD Recording
60i, PF30, PF24, Native 24p
64GB Internal Flash Drive
Flash Memory
The XA10 Professional Camcorder allows users to record up to 24 hours of clear high definition video to a 64GB internal flash drive or to two SDXC-compatible memory cards. With Relay Recording, the camcorder automatically switches video recording from the internal drive to the SD memory cards when the memory becomes full.
Video can be copied from the XA10's internal drive to removable SD memory cards. That makes it easy to insert the card into your computer or HDTV's card reader and view your recorded footage immediately. Double Slot Recording allows recording to two SD cards simultaneously, providing an automatic backup while shooting.
AVCHD Codec
The XA10 features the AVCHD codec. AVCHD (Advanced Video Coding High Definition) was announced in 2006 and is quickly becoming the standard for professional camcorders. AVCHD utilizes MPEG-4 AVC/H.264 compression technology similar to the technology used in Canon's HD DSLRs. In addition to professional grade camcorders, AVCHD is very popular in the consumer market and as a result most nonlinear editing software, both professional and consumer, have full support for the codec; this makes for easy compatibility with the XA10 no matter what system you choose.
Will I be able to take out the SD cards, put them in a card reader, and simply log and transfer into Final Cut Express? Again, I'm a novice and don't know what a lot of this means.
Thanks!!!!

FCE should work with the 60i (interlaced) footage this camera produces.
Also you should be able to load the SD and capture.
I do not have one or used one with FCE, the specs indicate it should.
Maybe a current owner can chip in their experiences.
Al

Will my printer and scanner work with the new intel mac?

My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
The responses were
"At this point in time with have been given no information on whether our printer drivers will work or not....".
"Yes it will work with OSX 10.4"
"As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
Power Mac G4 (AGP graphics) Mac OS X (10.4.4)

Will my Apple VESA mount work with the new 27" iMac?

Hi
I have an alu iMac 24", model: iMac7,1
I have the Apple VESA mount kit for it.
I have just ordered the new 27" iMac and I'm wondering if I can use the same VESA mount for the 27" when it arrives?
Thanks
/Martin

Thanks for the reply.
I'm not sure.
Is that the VESA mount that they have always had on the Apple Store for the 24" and now they have just added the 27" in the text, or is it a whole new VESA mount (which then is backwards compatible with the 24")?
I tried looking for an Apple support email address to ask this, but that seems hard to find.
Message was edited by: Ayla

Will iTunes 10.6.3 work with the new iOS7?

iTunes version 10.6.3 is the latest possible version of iTunes my that my computer will support (MacBook 2008 - MAC OS X version 10.5.8) and this version of iTunes worked for my iPhone 4S running iOS 6.1.3. Will I still be able to sync my iPhone with iTunes 10.6.3 if I upgrade its software to iOS 7? Thanks!

You will not able to Syncronization your devices (iOS 7) to iTunes 10.x .
I have problem here right now with that. if you love iTunes 10 and iOS 6. Keep it better. iOS 7 interface like use for kinder garden only. Its horrible now. Now apple has changing everything since the genuine LEADER has one.

Since i have upgradet my ipod touch 3g with the new 5.0.1 version, i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is the 10.5.3 ... please help me!

since i have upgradet my ipod touch 3g with the new 5.0.1 version, i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is 10.5.3 ... please help me!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Will my iPod 3G be compatible with the latest iTunes (11)?

Hello all.
As the title asks.....Will my iPod 3G be compatible with the latest iTunes (11)?
The reason is I am having problems making my iPod 3G, iTouch 2G and iPhone 3GS all connect to iTunes store etc. I am having an error message of -42408 when launching my present iTunes 10.6.3.

We have 2 out of 3 of those and iTunes 11 works great on all of them.
It does take some getting use to from iTunes 10.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

My experience with upgrading from Snow Leopard to Lion is that the OfficeJet Pro 8500 Wireless will print just fine, although it seems to take a little longer to find the printer on the network. My scan function however locks up and will not work. This really is an annoyance, though, since I have VueScan, which works fine with Lion.
Hopefully, Apple and HP will not orphan the OS native scanning feature for HP multifunction printers.

Will my MBA work with the new LED Cinema Display

I have a first generation MBA, model identifier MBA 1.1, and want to know if my mini display adapter will work with the new LED Cinema Display. I believe I have a micro-DVI that is different from the new MacBooks and MacBook Professional models that have a new Mini DisplayPort. If anyone is using this old MBA to new LED Cinema Display combination please let me know.

Scott,
The new display isn't shipping from Apple until some time in November so the only direct feedback you'll get is from anyone that's been to the store and played with the demo unit.
With that being said, it would appear (based on the system specs and requirements, posted on the site) that the new display requires the new adapter type that's found only on the new MacBook, MacBook Pro and MacBook Air.

Will my old wall charger for Zen Vision:M will work with the (New) Z

i bought a wall charger from amazon for my Zen Vision: M 30GB, will it work with the (New)Zen? i just bought the Zen 6 GB and it doesn't comes with an adapter, pretty bad move there, well, does it has the same plug? i hope it's compatible. thanks

sebastiankf,
That third party adapter from your Amazon link is hard wired specifically for the Vision:M and will not work with any other Creative player unless it has the same pin-outs using the same docking interface. The Creative AC-5V adapters will either have a coaxial power plug connection that will work with most of the Creative hard disk based players, except for the original NJB and Zen Micro, or a USB Mini-B plug that will work with all of the flash players that have a USB connection and the Zen Micro.

Will my LED 27 Cinema Display work with the new Mac Pro?

Will my LED 27 Cinema Display work with the new Mac Pro?

Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

Will my iPod 5G Touch work with the new AppleWatch?

Similar Messages

Maybe you are looking for