Will my LaCie 20gb Pocketdrive work w/OSX 10.4??

I have an iMac G4 17" want to upgrade to Tiger. LaCie's site does not provide support/new drivers for this FireWire drive. Can I get it to work with Tiger or should I purchase a new removable drive?
Thanks!
Bill

No new drivers are necessary.
Your drive should work fine with Tiger.
Just be sure that drive is unmounted and NOT connected while you perfrom the Upgrade to Tiger.
Mike

Similar Messages

  • Will a LaCie 20gb PocketDrive work with Tiger??

    I have an iMac G4 17" want to upgrade to Tiger. LaCie's site does not provide support/new drivers for this FireWire drive. Can I get it to work with Tiger or should I purchase a new removable drive?
    Thanks!
    Bill

    Hello again Bill,
    Just another 2 penneth...
    My own drive was on Panther and is now on Tiger. Its a Maxtor, there were some issues when the change came. None serious though. Let me, or any one else for that matter, know via here or via email. Details in my profile.
    Cheers
    Ian

  • Will this usb/firewire card work under OSX jaguar?

    here is the link to it. I know it says windows but could it possibly work on mac?
    http://www.jr.com/JRProductPage.process?Product=3995178

    Vstream,
    When you hear the startup chime, two things can happen that might give the appearance the 'book has shut off.
    1. After the chime, the Wallstreet goes through a memory test and nothing appears to be happening. This test can take up to 45 seconds with a lot of RAM. After the self-test, the display lights up and the OS begins to load. This test does NOT run through a restart, only a cold start. If you hear the startup chime, let the 'book sit for a few minutes and see if anything happens. Also listen for the spinning of the HD below the 'delete' key; if it is still running, the 'book is still ON.
    2. When running OSX, the Wallstreet has a peculiarity where if the power manager has lost all power, the 'book will start up to a dark display and/or wake to a dark display. The only fix for this condition is to boot to a pre-OSX CD (any will do); this will correct a problem with the power manager. The power manager can lose power if you have no working main battery plus the power adapter is unplugged...then the internal rechargeable PRAM battery runs down.
    I would try this: Make sure the 'book is OFF by unplugging the power adapter and removing the main battery. Open the CD tray by pushing an opened paperclip into the little hole next to the button and load your pre-OSX Classic CD. Connect the power adapter, then press the power button and hold down the 'c' key; if no startup chime, reset the power manager, then press the power button again while pressing the 'c' key.
    If it starts to the CD, open the Startup Disk in Control Panels under the Apple menu, select OSX, save it by closing the control panel, then click restart in the Special menu and see if it will boot to OSX.
    Edit: Make sure all peripherals and PC cards are removed.
    Message was edited by: jpl

  • Will Final Cut Studio 3 work with OSX Mavericks?

    Hi,
    Does anyone know if Final Cut Studio 3 will work with the New OSX Mavericks when it's released this fall?
    Thanks in advance

    If you have the snow leopard install disk, you can do a custom install and just install rosetta. 
    One person on this forum, says there are serious issues with this workflow and links to another method.
    https://discussions.apple.com/message/22029476#22029476
    I've done it a few times without any issues, and I haven't seen any definitive reports detailing the problems with this. 
    Doing a complete clean install is the much safer way to have a dependable system.  Here's a user tip on OS and FCP installation
    https://discussions.apple.com/docs/DOC-2861
    I'd also recommend creating a bootable clone of your startup drive before doing any os upgrades or application installations or upgrades.  That way if things go south, you can easily return to the previous working system.
    https://discussions.apple.com/docs/DOC-2494

  • Will MobileMe mail continue to work with OSX 10.5 after June 30, 2012?

    Since I can't upgrade a PowerBook G4 beyond Leopard (OSX 10.5), I'm not able to migrate MobileMe services such as Mail to iCloud. Although I understand the .mac and .me email domains will continue to exist, it's not clear whether my Mail App (Mail 3.6) will still work. Has anyone found a KB posting or other info that addresses this?

    I don't believe this is correct. The configuration for the iCloud mail server is published in the KnowledgeBase.
    http://support.apple.com/kb/HT4864
    "iCloud Mail uses IMAP and SMTP standards supported by most modern email applications..."
    I believe there is no reason that my current Mail App 3.6 won't be able to continue to work with the iCloud Mail servers.

  • Will office 2011 or 2008 work with osx version 10.8

    I just upgraded to osx version 10.8 and now my microsoft office word and excell are useless-do I have to purchase moffice 2011?

    I've got a couple of niggy small problems with 2008 but nothing anywhere near major enough to want to pay for an upgrade. I have the feeling it would work a little better had I installed it under Snow Leopard or Lion first rather than clean installing under ML but that's not worth the hassle for me at this point.

  • Will the HP LaserJet Pro P1102w Printer work with OSX 10.9.5?

    I am looking for an affordable LaserJet printer for home. I want to know if the HP LaserJet Pro P1102w will work with OSX 10.9.5. Their website only goes up to OSX 10.7 for compatible OSX systems.

    OS X- Printer and scanner software available for download

  • How do I determine which applications I have which will work with OSX Yosemite?

    I am Currently running OSX 10.6.8, and am considering upgrading to OSX Yosemite.  I would like to know how to determine which applications I have which will not work with OSX Yosemite? 

    Click here and check the table.
    (123205)

  • Will an epson photo 2400 scanner work with OSX 10.7?

    Will an epson photo 2400 scanner work with OSX 10.7?
    If so where do I get the drivers/software to run it?
    I have used it with aquire, but only in flat bed scanning.
    I am not able to use the film/slide mode anymore because the software that came with it is for 32 bit macine code.
    Any ideas?

    I realize this isn't a direct answer to your question, but I have an Epson Perfection 1670 flatbed scanner.  I plugged it into a USB port after installing Lion, and it works fine with both the Image Capture and Preview applications.  ("FIne", for me - I don't have a need for slide/transparancy scanning.  Image Capture recognizes the scanner can do it, giving two modes for transparancy scanning, but in a quick and dirty test a minute ago it didn't seem to work.  Since I don't need the capability, I'm not going to struggle with it to see what I've done wrong.)
    Good luck
    srb

  • Will C4480 printer work with OSX 10.9.4

    Hello. When I bought my iMac six years ago, I got a new C4480 printer which has sat in the loft, still in the box and unused until today when my "old faithful" bit the dust. The iMac is running OSX 10.9.4.
    When I try to print, I get the messages "HP Supplies Tool cannot be opened because of a problem" and then "Photosmart  cannot be opened because of a problem" ... and no printing.
    I've checked Apple Menu > Software Update and there's no new software to download.
    Will the C4480 work with OSX Mavericks or is it just too old?
    Thanks in advance.

    Hello there @Chiefsub !
    Your Photosmart C4480 should still work on Mavericks. See the link below for all of the information you'll need to have it installed. I would suggest ensuring the printer will make copies to just test the hardware to make sure the printer is functioning properly.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    I hope that helps, have a fantastic Tuesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Will idvd work w/ osx mavericks?

    will idvd work w/ osx mavericks?

    iDVD 7 works very well with iMovie 6 HD.  You can get iDVD 7 from an iLife 09 disk (both include iDVD 7) and then updating it to the 7.1.2 from the Apple - Support - Downloads website. 
    You can get a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com or eBay.com.  When you go to install be sure to do a custom install and install only iDVD and it's resources.
    iLife 09 includes all of the themes from previous iDVD versions, 1 thru 7.  the iLIfe 11 disk does not. It only include themes from iDVD 5 thru 7.
    Here's my full directions for obtaining iDVD 7:
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Will the magic mouse track pad functions work with OSX 10.8.5?

    Will the Magic Mouse track pad functions, i.e. scroll, zoom work with OSX 10.8.5.? Or do I have to upgrade to get those functions to work?

    Yes, they'll work with 10.8.5.

  • HT201364 will my OSX Snow Leopard 10.68 Apps work with OSX Mavericks

    Will my apps from 10.68 work in OSX Mavericks. I have recording software, Motu Digital Performer 6, I cannot afford $200 to upgrade software. Are Most Snow Leopard Apps Compatble with Mavericks

    Do you have any Power PC Apps on your Mac?
    They will NOT run on Mavericks (or Lion, or ML)
    in System Information (I think it was called System Profiler in SL),
    Select Software->Applications and sort by Kind (see: https://tidbits.com/article/12156)
    (If no PowerPC Apps, then best to test yourself (or ask in the "Motu Digital Performer" forums (if it exists)
    If you have a Time Machine backup, you can easily revert back to a proir OS:
    OS X Mavericks: Revert to a previous OS X version)

  • Which version of iMovie will work with OSX 10.6.3?

    Hi all,
    I am new to the world of Macs and have an older power mac to play with.
    I want to get iMovie, but cannot find a version that will work with OSX 10.6.3 on the app store, can anyone tell me which version will work with OSX 10.6.3, and where I might get it?
    Thanks

    Hej
    iMovie'11
    iMovie History 08, 09 & 11These are NOT AN EVOLUTION FROM Previous versions (iMovie 1 to HD6) but a totally new application.
    iMovie 08 (v7) 7.1.4 (aug 2007)
    • A new way of storing project and an event library as well
    • A totally new product in a pre-release state. Far from a working application.
    • Lacks even basal functions
    • No Speed-up or down or reverse
    • Lot’s of video-formats lacking
    • No cont. TimeLine - Bad logic
    • No good for interlaced SD-video from miniDV tape aimed to a DVD release.
    (Discarding every second line makes quality as VHS in LP or EP mode = BAD)
    • NO - Playback via Camera/FW - and this prevents 100% safety-backups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
    • Color tools got much BETTER - nearly usable - even sort of a copy function
    • Direct share to .Mac and YouTube
    • More Cameras supported even AVCHD (need of Intel CPU)
    • Do not run on G4 or older - G5 minimum
    • Need of 1.9 GHz G5-Mac,
    (Can run on 1.8GHz G5 iMac if installed on external boot hard disk and speedier Mac - can’t install directly)
    • Mac OS X.4.9 minimum
    • QuickTime 7.2 included
    Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
    iMovie 09 (v8) 8.0.6 (jan 2009)
    • Far better than iMovie 08 but still far from good.
    • Pic in pic, green screen but rudimentary
    • Image stabilization - fairly good for amateur use
    • Speed-up/down and reverse
    • Bl/W, Old age etc
    • Still - No Continuos TimeLine
    • NO - Possibilities to enhance by use of third-part Plug-ins (all investments lost)
    • NO - Playback via Camera/FW - and this prevents 100% safety-backups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
    Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
    iMovie 11 (v9) 9.0.x - 9.0.4 (2011 july)
    • Will be - Intel Only
    • Snow Leopard minimum Mac OS X.6.3
    YES
    • Advanced view including a true TimeLine ? Yes but rudimentary (very basic)
    • True Story-board - where You even can write and prepare space for lacking material that needs to be obtained or re-shoot. YES
    • Better wave-form presentation of audio and audio tools - Rubber-band - Yes
    • Trailer creating tool
    • ”Faces” as in iPhoto - NO - but this finds if there are people in some video-clips
    • Better audio tools. Equalizer and a background audio reducer
    • More Camera support e.g. 24fps
    NO
    • not 64-bit only
    • The Playback to Camera via FW - returns ? NO
    • Full Quality to iDVD - NO - still only half - every second line - Questionable - Some indicates it to be able to loss-less Exports - Has to be proven
    • Plug-in facility ? - NO
    • No free text tool
    • Tool to mask an identity e.g.. band over face or un-sharp area. - NO (could be obtained via Plug-ins in iM HD6 and earlier)
    • Animation tool - To point on interesting object/player - NO animations refer to a totally different
    thing connected to Story-board and insert of ”dummy animations” while building a movie
    Yours Bengt W

  • I recently upgraded to osx 10.5.6 and found the version of itunes which allowed me to use my iphone 4, well now i've got the iphone 5 c, how can i find a version of itunes that will work on osx 10.5.6 and allow me to syn my iphone 5?

    is there a version of itunes that works with osx 10.5.6 and also allows my to sync my iphone 5?

    You say you have 10.5.6 (Leopard) but your signature says you have 10.6.6 (Snow Leopard) - which is it?
    If it's Snow Leopard all you have to do is apply the combo updater:
    http://support.apple.com/kb/DL1399
    If it's Leopard it depends on what sort of processor you have. It it's PPC you cannot proceed. If it's Intel you may be able to upgrade to Snow Leopard (which is available in the Online Apple Store) provided you have enough RAM: check the requirements against your Mac.

Maybe you are looking for

  • Dual Monitor Support

    Not sure if this one can be anwsered yet, but curious to know if there is a way to hook up dual monitors on the new Mac Pro cylinders?  I don't mean just mirroring either. I have worked with dual monitors for a very longtime. One I use for my workspa

  • Error while Deploy Webdynpro  application

    hi experts, while Deploying my Webdynpro application i am getting the following error. Jul 25, 2007 12:05:54 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR: [002]Deployment aborted Sett

  • How do I sort bookmarks in a folder in alphabetical order

    I have downloaded the latest version of Mozilla Firefox this morning, but I notice that the folders in my bookmarks are not in alphabetical order. I am a crafter so I do need them in order. Can you please tell me how to do this. If this cannot be don

  • "The Installation Has Failed." How can I install Adobe Reader XI Pro on OSX 10.10.1?

    I'm looking to test out Acrobat's OCR functionality (converting PDF to .docx format). I've successfully downloaded the installer (through the Adobe Downloader Assistant), but every time I attempt the installation, I see the following screen: How can

  • How to get data in ABAP program from multicube in external BW system

    Hi friends,      I want to get data from one multicube which resides in an external BW system, in my ABAP program internal table. Is there any SAP standard RFC / BAPI for this or is there any other way around or I have to design my own program to get