Will my mac mini connect to a display and a projector at the same time.
I want to be able to use my LCD display while at the same time use a projector for slide presentations. Is there some adapter that will run off of the USB connector and connect to the projector cable (15 pin connector)? Thank you for suggestions.
Yes. Check http://www.matrox.com/graphics/en/products/gxm/dh2go They have several solutions, one of which may work with your machine.
Similar Messages
-
Is there a way to view video via the display AND TV out at the same time?
Is there a way to display the video output for supported apps on the display as well as through the TV out at the same time? To explain my setup briefly, I'd like to have the front seat passenger in my vehicle be able to hold the iPad and watch video while the A/V cable runs through the car system and displays on the ceiling mounted TV for the back passengers.
As of right now, it seems as though it will only allow for one display at a time, and in this case, only showing video through the TV out. I don't know if the iPad has the processing power to mirror outputs to the display and the TV out at the same time, though I imagine that it should.
So, does anyone have any ideas on how to make this possible, if it's possible at all?
Thanks in advance.If you'd emailed Steve Jobs with this question, here is what his response would have been had he blessed you with a reply:
No. -
Ipod nano 4gb connect to windows xp and apple imac at the same time
can i connect my new ipod in my windows xp and download my songs then can i go to my new apple imac computer and connect my nano to that one as well and start downloading my songs i was told it will erase all my songs help!
The link Mitch posted explains how to use an iPod with more than one computer.
Now, because you use a Mac and your Mum uses Windows complicates matter slightly.
An iPod formatted for use on a Mac cannot be used on Windows without some additional software. This is because Windows is incapable or reading the file sytem that Macs use.
However, if you were to reformat the iPod on your Mum's Windows PC, then you could use it on both Mac and Windows computers.
Clearer now? -
Connecting to wireless network *and* another computer at the same time?
Hi,
I will be getting a new macbook soon and have an old powerbook with airport. I am wondering if it is possible to connect to my old powerbook via airport, while still being connected to a third-party wireless internet connection (from the macbook). The crucial point is that I cannot connect both computers to the wireless network, because subscription is based on the computer's hardware address and I don't want to pay for 2 computers (I don't need to have internet access on the old computer, just a connection between the two computers). Anyone knows?
Thanks!What you are referring to is known as "Internet Sharing" for Macs, but it's typically restricted to sharing the Internet connection from one port (either AirPort or Ethernet) to the OTHER port...not AirPort-to-AirPort or Ethernet-to-Ethernet.
-
hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?
You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly! -
I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem
First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
Problem connecting Firewire device and external HD at the same time
Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.
-
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
How can I connect to Oracle and SQL server at the same time?
I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
Can I connect multiple bluetooth headsets to my iPod at the same time?
Can I connect multiple bluetooth headsets to my iPod at the same time?
After 1 or 2 reboot system I managed was enter my MacBook Pro my AppleID and it is connected I managed so to have the flow of "Stream Photo" from my iPhone 4 S to my iPad 2 on the MacBook. But incomprehensible how the function "find my Mac" not recognize the MacBook Pro in "iCloud.com" or App in the iPhone 4 / iPad 2. Thus I do little "see the iMac, iPhone 4 and my iPad 2" and not the Macbook Pro !?!
I am sorry about my English quality but I'm not English speaking this text is translated by Microsoft Translator. -
How does iCal, or Calendar, order the display of multiple events for the same time?
I can't for the life of me figure out how iCal orders the display of multiple items at the same time. Does anyone have a clue? It's not alphabetical. It's not according the the order of the calendars in the left pane. Is it just random? Any help would be greatly appreciated.
In the focus lost eventhandling start a thread which does
the actual handling.
the new thread waits for a little time (0.1 seconds)
the click event of the button checks for a thread like the one above and tells it not to execute
This way you execute the for the lost focus event only if
the ok button isn't clicked in the same process ... not
realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you? -
my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?
It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...
Maybe you are looking for
-
Hi, How to Print the Report in Multiple Pages? i.e. Once the first page Report is finished , the next one has to start printing, and so on.Each Page can contain more than one pages. TIA, Vikki null
-
Error code 0x80020063 when trying to burn cds. HELP PLEASE
I have a brand new Macbook Pro, less than 90 days old and am having CD burning issues. Every other cd I try to burn it fails at the end when it goes to verify the CD. This is getting old as I am throwing away half my CD's. I have searched all over an
-
Hello, I'm writing a JSP page with a shopping cart so the user can add products to it, nfortunately the thing won't work.. I keep getting an NullPointerException.. I'm probably screwing up somewhere.. I would be very thankful if you could help me out
-
Poor quality images on Slideshow
Hello all, I recently downloaded Aperture from the Mac App store - seemed to good a bargain not to and I was already considering upgrading from iPhoto 08. I imported all my pictures (along with the captions) into Aperture and created a slideshow from
-
I have tried to log back into my game center and i keep getting (GKErrorDomain error 3.) Now i know for a fact my internet is working fine and all my other apps are working fine apart from game center. I have reset my phone and just done the most rec