Will my macbook air continue to backup to the external storage in the sleep mode

will my macbook air continue to back up in the sleep mode

If it's a recent model (mid-2011 or later), then the new Power Nap feature should work, including hourly Time Machine backups, depending on how you set it up.  (It probably requires a SMC update, though.)
See Mountain Lion: About Power Nap for details.

Similar Messages

  • Macbook air (2012) with Lion shuts down when waking up from sleep mode

    Looking for solutions to this problem, which occurs about 30-40% of the time after computer wakes up from sleep.  Doesn't seem to be related to the length of time that computer sleep or whether I put it to sleep manually or it does so automatically.  I've read in other forums that upgrading to Mountain Lion does not solve the problem.

    You might try resetting the SMC:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    Good luck!

  • I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive?

    I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive and not save it on the computer's harddrive?

    Just be sure to Follow the steps here to transfer your iTunes to an External Drive...
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751

  • My macbook air has shutdown unexpectedly and the fan has been continuously running. and, now the system won't start

    Today while working on my system, it shut down unexpectedly. And, subsequently the fan switched on, which has been running continuously for the past couple of hours. Since then have tried restarting the system, but it won't.

    Hello atanu69,
    I'm sorry to hear you are having trouble getting your MacBook Air to turn on.  The resource below will offer some troubleshooting steps to try to resolve this issue.
    If your Mac won't turn on - Apple Support
    https://support.apple.com/en-is/HT204267
    I hope this information helps ....
    - Judy

  • HT1338 my macbook air continuously turns itself off and on again for no apparent reason- despite having full battery... What is wrong with it?

    As of recently my macbook air continuously turns on and off.
    Sometimes it does not turn on at all.  When it does turn on, after a few minutes it comes up with the shut down options and unless I press cancel it turns off.  Occasionally when turning on it only gets as far as the startup sound then turns off again- occasionally in a continuous loop.
    Any ideas?
    HELP!

    I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place

  • If I upgrade to Mountian Lion on my iMac, will my Macbook Air get the update free of charge?

    I have an iMac and a Macbook Air. Both are running Snow Leopard 1.6.8. If I upgrade my iMac, will my Macbook Air get the update free of charge from the Mac App Store? Is it similar to buying an app on one iDevice and getting it free of charge on another iDevice with the same iTunes account?

    Yes, indeed it is the same.  But you must use the EXACT SAME Apple ID account on both machines for the Upgrade.
    Hope this helps

  • Will a MacBook Air run my SMART board?

    I would like to run my SMART board from a computer that is easy to transport.  Will a MacBook Air (11") run this program well or should I choose a MacBook Pro 13"?

    mguasch wrote:
    Also, one of my concerns is about the possible "breakability" of the MBA.
    Here's a lightweight, squishy "memory foam" sleeve for MacBook Air 13":
    http://www.be-ez.com/en/la-robe-air-black-addict.html
    ...If you're still in Austria, you can get it HERE.

  • In Safari on my Macbook Air using Yosemite, I have the pop up box unchecked but I am still getting blocked on a few sites. Some sites will allow pop ups, any Ideas?

    While in Safari on my Macbook Air using Yosemite, I have the block pop ups box unchecked but I am still getting blocked on a few sites. Some sites will allow pop ups, any ideas?

    Yes, I do that every 30 minutes, thats not the issue tho, because it shows like for example, 4 months ago i search a celebrity on wikipedia ONCE, and it shows up if you type that first name in the search bar......
    Is there ANYWAY to get rid of this bug..or does Apple Mac come with a defect....is this happening for other people, can someone please check, I asked my friend it comes for her too, but way less results, and sometimes when she resets safari hers goes away for the moment, and comes back later when u search...hmmm strange...
    need help!!!

  • My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

    My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • My macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    my macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Macbook air can't go to the internet when connected with hard disk

    Hi, so my macbook air can't go to the internet everytime when it is connected with my hard disk. The wifi icon on the top right corner says my macbook is connected to my wifi but my macbook just can't go to the internet. I unplugged my hard disk and I have no problem connecting to the internet right away? I would like to know if there is any solution for this problem.
    Thank you

    Try resetting your SMC.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    I hope I helped.
    Austin

  • I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

    I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!  Further info:  I am a complete newbie to Mac.  Had three macs prior to 2000 then four PCs.  Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back)  with the F4 function key.  While I can get the background image from my MBA to display, that's it.  Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on.  So Idragged it over to display in the centre.  But that's all that's there.  And now I have gone out of those web pages but they are still displaying on the monitor.  There is some wierd disconnect.  I'm sure it is just a setting thing.  Will keep searching for answer but any advice welcome!

    Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
    Let me know if this worked for you.

  • HT201181 hi, in apple MacBook Air 11.6" what is the shortcut key for print screen

    hi, in apple MacBook Air 11.6" what is the shortcut key for print screen

    To capture the entire screen to an image, use the key combination ⌘ shift 3.
    To capture a selection rectangle, ⌘ shift 4.
    To capture the frontmost window, ⌘ shift 4 and then press the space bar.
    The screen grab will appear on your Desktop. Open it in Preview or your favourite image editing software, and print in the usual manner.

  • HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
    In another, though unrelated article, Apple recommends the following:
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
    This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

  • Connect macbook pro to macbook air as if it were an external hard drive?

    can i connect my macbook pro to my macbook air as if it were an external hard drive?
    i tried using migration assistant, which will work, but i want to look through my stuff as if it were an available external harddrive, then click and drag stuff onto my new computer.

    If you are using Ethernet to connect the two computers, then enable File Sharing on the MBP. Select the MBP's Desktop drive icon. Press COMMAND-I to open the Get Info window, check the box labeled "Shared Folder." You should then be able to mount the MBP's shared drive on the MBA's Desktop and browse to your heart's content.

Maybe you are looking for