Will my NVIDIA GeForce FX 5200 Ultra graphics card drive a 30" display?

I have a NVIDIA GeForce FX 5200 Ultra in my G5 that I purchased 3 years ago. A colleague is selling his 30" monitor (about 2 years old) and I wanted to see if this card would let me use the monitor to it's fullest.
Will my current graphics card handle it?
Thanks ...
Processor 065-4931 2.0GHz PowerPC G5
Memory 065-4976 1GB MB DDR400 (PC3200)-2X512
Hard Drive 065-4982 250GB Serial ATA-7200rpm
Optical Drive 065-4928 8x Super Drive (DVD-R/CD-RW)
Graphic Support 065-4929 NVIDIA GeForce FX 5200 Ultra

You will need a new graphics card with dual-link DVI.
Starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

Similar Messages

A G5's NVidia GeForce FX 5200 Ultra 64mb in a Dual G4 1.25

Hi i have an NVidia GeForce FX 5200 Ultra 64mb that is my back up card to my G5's NVidia GeForce 6800 GT 256mb, as it's not being used and as i got my lad a Dual G4 1.25 i was wondering will the FX 5200 work in the G4, as it's card though 64mb is Core Image: software and the FX 5200 is hardware.
Thanks for your advice guys.

Hi-
Exactly right- just tape the pins as per this article, and install.
All good!

Is nVidia geForce 8400: 512 mb Graphic card supports openGL?

Hi Guys, I am using nVidia geForce 8400: 512 mb Graphic card. could some please tell me whether this card is supports openGL? because when I tried in photoshop it is in disable. I can not able to enable. So kindly give your suggestions.
HARI

In the world of video cards, the nVidia geForce 8400 is ancient, slow, and outdated. On a scale where the fastest modern cards benchmark in the vicinity of 3000, the geForce 8400 measured out at 160 (http://www.videocardbenchmark.net/).
Do yourself a favor and buy a modern video card mesauring at least 1500 on that scale (see the High End Video Card page). They're not that expensive! Your entire system will pick up speed, and Photoshop can really scream.
-Noel

Compatable replacement for nvidiaq geforce fx 5200 ultra video card

i've run diagnostics and need to replace video ram-- can't find nvidia geforce fx5200 ultra that is for imac g5 17'. is there another compatable card? Help!

nvidia geforce fx 5200 ultra

Will the Gigabyte Geforce 970 G1 Gaming Graphics Card fit in my HP...

Can anyone tell me if the Gigabyte Geforce 970 G1 Gaming Graphics Card fit in my HP case.
I have an HP ENVY Phoenix 810 PC Series, Model No. 810-270st
Thanks!

Hi,
I am happy to hear that you have the HP 810-270st. Review this posted document and open up your PC and measure.
You can check the available space against the dimensions of this Gigabyte 970 G1. What do you think?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Nvidia GeForce 650m 2GB fried graphics card

Hello, I'm posting because I've had ALOT of issues with my Nvidia GeForce 650m Graphics Card. I originally bought an HP Pavillion DV6 7014nr. I'm not sure what exactly is causing the issue, but something is causing the computer to kill the graphics card. Currently I have had the graphics card replaced 3 times on the DV6 and each time it has died. The first one lasted the longest uptill November. (I purchased it in August). Then it was sent off, they fixed a bunch of stuff, but not the card, sent it off again in December, got it fixed and it died within the week. I sent it off, got it fixed, and it died within 3 hours of having the computer. Sent it off again and that one died within a day of having it. Now HP finally replaced the entire computer, with a Envy DV6 7000 Quad Edition, with the same card. I got it on Monday and as of yesterday aka Tuesday it died. Now this card should be capable of running almost any game on high, yet it dies on these little games on low. The game I noticed it has had the biggest issue of dying on is Starcraft 2, but there has been no reports of issues since 2010, and Blizzard has said there are no known issues. I have played SWTOR, DCUO, Aion, SC2, and S4 League. I have tried everything, updating to the latest drivers, updating the BIOS, keeping the fan open and cool, putting an external fan and lowering the graphics. Nothing seems to work. I really don't know what to do, I have tried EVERYTHING that I can possible think of and I'm running out of options. The computer is covered under warrenty, but I'm really getting tired of having my computer gone for week at a time and the issue still continues to happen. I would really appreciate any input, or if anyone else is having the same issue. I am pretty tech savvy, so if there are some "Advanced things" that I might have to try, I should be able to handle them.
The error code I get from the device manager is an Error code 43 :Windows has stopped this device because it has reported problems. (Code 43). And when I click on the Nvidia control panel it says NVIDIA DISPLAY SETTINGS ARE NOT AVAILABLE. "You are not currently using a display attached to an NVIDIA GPU.
Thanks in advance!

Here is my current configureation.
Windows 8 64
3rd generation Intel Core i7-3630QM Processor (2.4GHz, 6MB L3 Cache)
NVIDIA(R) GeForce(R) GT 650M Graphics with 2GB GDDR 5 video memory
12GB DDR3 System Memory (2 Dimm)
750GB 7200 rpm Hybrid Hard Drive with HP ProtectSmart Hard Drive Protection
NO mSSD Hard Drive Acceleration Cache
Microsoft Office Trial
No additional security software
6 Cell Lithium Ion Battery
15.6-inch diagonal Full HD Anti-glare LED-backlit Display (1920 x 1080)
Blu-ray player & SuperMulti DVD burner
HP TrueVision HD Webcam with integrated dual array digital microphone
Intel 802.11b/g/n WLAN and Bluetooth(R)
Backlit Keyboard
My problem is that I keep getting an error 43 code in the device manager and the nvidia control panel says "You are not currently using a display attached to a Nvidia GPU. The Bios version F.13 IS NOT WORKING. The F.0A worked for my computer that was running windows 7 and had the same error. I tried updating everything, but this computer is on windows 8 and its not working. I need a bios version that is working with windows 8. The F.22 version is known to cause errors. So far every HP support tech that I have spoken to has not been helpful, so I'm hoping someone on here has a solution.
Thanks in advance!!!

Fade-off with MSI T-128 (nVidia geForce FX 5200) PCI card

Hi
I'm totally fade-off with nVidia GeForce FX 5200 (MSI -T128) graphics PCI card. I've tried all options found on different forums and also with latest driver for the card both from MSI and nVidia. But non of these are able to solve my problem.
Even though, I have installed the latest driver for the card form nVidia or MSI, my system gives BSOD (infinite loop) on XP and system hang on Ubuntu/Linux. Request you to please help me out for this problem. Its dam sure something wrong in the card driver or BIOS settings as its occurring with any OS.
This is my last ray of hope, with a expection that some MSI people will help me out, else I'll have to throw the f**king card to bin. Sorry being unprofessional, but it seems that I have wasted my money banking on the brand MSI/nVidia.
PC Configuration:
1. Asus K8N motherboard (nVidia chipset, NO on-board graphics)
2. MSI T-128 (nVidia GeForce FX 5200) PCI graphics card
3. Windows XP SP3/ Ubuntu 9.04
4. 512 MB DDR1 RAM
5. 320GB, 7200 rpm Seagate ATA HDD
6. AMD Athlon XP 2800+
Again request the nVidia people plz plz plz .. help me.
Note that, When I'm booting with safe mode in XP, the PC DOES NOT hangs.
Thank you in advance.

Its followed by "Sorry being unprofessional". But when my hard earning money draining, its obvious. Anyway, Do you have answer to my request ? Or only guiding me for proper language ? If you have ans plz give me too.
Quote
Is it AGP card? Which one?
Do not you know MSI T-128 is which one, Mr Moderator ?
Quote
Os running?
Windows XP SP3/ Ubuntu 9.04
Quote
Have you tested the VGA in another machine?
After a couple of years savings, I got this PC and you are asking for another PC ? I'm not rich like you.
Hope you have NOT read my post completely and replied, Mr moderator.

GeForce FX 5200 Ultra

I recently ungraded my mobo to a MSI 845GE Max. I also tried to install the PNY GeForce FX 5200 Ultra video card. I am running Windows 2000. When I try to install the drivers for the Video card, the system locks up on reboot and the login image is distorted. The PNY FAQs suggest upgrading the Intel chipset, which I have done. Still seems to be in conflict with the onboard vga controller. When I disable the onboard vga driver, the system locks needing a hard reboot. System runs great on the onboard graphics card, but I want to install a 3D card.
Does anyone have any suggestions? Thanks,

Hi gdiodati,
Try disabling your onboard VGA, then set your Init. Graphics Adapter Priority to AGP.
Set your AGP Aperture settings to 128MB or 256MB.
Set your AGP Capabilities to "Auto"
Make sure that its running on at least 4x(1.5v) or max 8x(0.8v).
Check if you've any other devices sharing IRQ with your VGA card.
All the Best... :D!!!

Dual monitors on nvidia geforce fx 5200

Hi,
I'm using a nvidia geforce fx 5200 card that has vga out, dvi out, and svideo out. I have one crt hooked into the vga, the main monitor, and I have a dvi to vga converter, to enable a second vga, crt monitor. When I try to use the nvidia-settings, and enable twinview, and I get this message:
"failed to set metamode (1) 'CRT00: nvidia-auto-select @1024x768 + 1024+0, DFP-0: 1024x768 @1024x768 +0+0' (Mode 2048x768, id: 50) on X screen 0."
any ideas? thanks.

Hm, Not working, just display on the true vga monitor. Are you using a dvi to vga connector as well? Heres my log output, I couldn't make too much of it, I tried to switch the CRT-1 to DFP-0 which didn't seem to do the trick either.
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux kenny-desktop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 13:50:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/0, 0xe0000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@3:10:0) Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.12 Thu Jul 17 18:36:35 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.12 Thu Jul 17 18:15:54 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: 1024x768 +0+0, CRT-1: 1024x768_85 +1024+0; CRT-0: 800x600 +0+0, CRT-1: NULL; CRT-0: 640x480 +0+0, CRT-1: NULL"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.42.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0)
(--) NVIDIA(0): DELL D1025HTX (DFP-0)
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0): 350.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): Invalid display device in Mode Description
(WW) NVIDIA(0): "CRT-1:1024x768_85+1024+0"
(WW) NVIDIA(0): Not using mode description "CRT-1:1024x768_85+1024+0"; unable
(WW) NVIDIA(0): to map to display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) NVIDIA(0): "CRT-0:800x600+0+0,CRT-1:NULL"
(II) NVIDIA(0): "CRT-0:640x480+0+0,CRT-1:NULL"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech Optical USB Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event2"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Fri Feb 13 13:52:42 2009: 3113 X: client 17 rejected from local host ( uid=0 gid=0 pid=3481 )

NVIDIA GeForce FX 5200 with Apple 23" Cinema Display?

Hi,
I would like to know if my graphic card in my Sony Vaio PC is compatible with a 23" Apple display ? I would like to run a splitter with one feed going to my Mac Pro and the other to my PC utilizing the same Apple LCD monitor.
I have a NVIDIA GeForce FX 5200 with 128Mb, this card has a PCI connection,but I am not sure if my card could support the Apple 23" Cinema Display that I recently purchased to replace the 19" Envison LCD that I'm currently using ?
Does anyone have an idea ?
Is there a list somewhere giving compatble graphic card ?
The nvidia site does not say a word about cinema display !
Thanks in advance
Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Apple doesn't make compatibility information known
for non-Apple systems.
But yes, they do.
Here is the list of tested video cards for the ACDs:
http://docs.info.apple.com/article.html?artnum=301066
I highly recommend the Quadro cards; they are fantastic.
nansaidh
Dell Windows XP Pro 23" Cinema Display

NVIDIA GeForce FX 5200 compatible with 23" display ?

Hi,
I would like to know if my graphic card is compatible with a 23" apple display ?
I have a NVIDIA GeForce FX 5200 with 128Mo, this card has a PCI connexion,
but I am not sure if my card could support a cinema display at 1900x1200 ?
Does anyone have an idea ?
Is there a list somewhere giving compatble graphic card ?
The nvidia site does not say a word about cinema display !
Thanks for the answers,
Ben
no Mac .. V. sad indeed ! Other OS linux and xp user

Apple doesn't make compatibility information known
for non-Apple systems.
But yes, they do.
Here is the list of tested video cards for the ACDs:
http://docs.info.apple.com/article.html?artnum=301066
I highly recommend the Quadro cards; they are fantastic.
nansaidh
Dell Windows XP Pro 23" Cinema Display

PowerPC G5, NVIDIA GeForce FX 5200, problems with monitor

I have 1.6GHz PowerPC G5 (M9020LL/A) with NVIDIA GeForce FX 5200 & HP LP1965 monitor. Monitor does not wake up after going to sleep using system preferences or being turned off using the button. All I get is light blue screen changing to black and so on and on. Anyone? Thx a lot!

Thx for tips. Booting OK in Safe, reaching Desktop.
1. While in Safe, if both G5 & HP are on "never turn off" I get some dark grey screen after couple of minutes and I can "wake" G5 with mouse/keyboard. If I turn off HP on a button, nothing helps.
2. Still in Safe: as soon as I set G5 to sleep after x mins an HP loses signal, nothing helps. I can wake G5 from keyboard, coming to light blue pic and thats it.
3. Rebooting - nothing helps. As soon as I cut the power to monitor or it goes to sleep, same thing happens. Black screen turning to light blue and so on. I have tried to press Power on G5, put it to sleep, than wake it by pressing Power again. I am stuck on a light blue screen for a minute, then all of a sudden I get the signal back.
Only thing that "works" is to have Screen saver on x mins and Monitor on "Never".

Does the 15-inch Retina MacBook Pro 2.6-GHz version have the Nvidia GeForce GT 750M discrete graphics or is it just the 2.3-GHz version?

Topic title pretty much says it all. I want the 15-inch 2.6-GHz version with the Nvidia GeForce GT 750M discrete graphics or is it just the 2.3-GHz version?

Yes, I have. The hardware specs are shown for this model, but when you dig further into purchasing it, it doesn't list the graphics cards under "hardware".
My main concern came from reading somewhere (maybe on this forum) that some guy said he chose the 2.3 version so he could get the discrete graphics. I thought all 15inch 2.3 and above had both:
Intel Iris Pro Graphics
NVIDIA GeForce GT 750M

Which two displays on Geforce FX 5200 ultra are possible?

Hi,
I have a Powermac g5 2x2 ghz (2004) Geforce FX 5200 (ultra?) videocard with two 17 inch monitors. I would like to chance one (or maybe both) into a bigger one, maybe a 24 inch. Is this possible and what is important to look at ? And what is the max screen size and resulution this card can have on two monitors? I red somewhere the max res is 1600x1200 and 22 or 24 inch monitors need support for 1920x1080?
Thx in advance. Ron.

Hi-
The Geforce 5200 supports digital resolutions up to 1920 by 1200 pixels.
A LCD monitor with DVI input up to 24" is no problem.
I red somewhere the max res is 1600x1200
That is for analog, not digital.

Driver for the ati rage 128 ultra graphics card

WE ARE SUPPILED SOLORIES 8 (INTEL BASED) 02/02 TO ONE OF MY CUSTOMER.WE TRY TO INSTALL ON HP XE 320 PC.GRPHICS CARD DRIVER WAS NOT SELLECTING AUTOMATICALLY.IN THAT SYSTEM ATI RAGE 128 ULTRA GRAPHICS CARD(32MB ).WE ARE TRYING DIFFERNT ATI CHIPSET BUT NOT LOADING O/S FINALLY WE SELECT 640*480 STANDARD DRIVER AND LOADING COMPLTELY.I REQUIRE DRIVER FOR ATI RAGE 128 ULTRA DRIVERS.CAN YOU PL. PROVIDE ME.

Hello,
the drivers have been supplied with patch 109401-10. Maybe there are laters revisions.
Patch-ID# 109401-10
Keywords: security X11 6.4.1_x86 video driver ati 810 matrox nvidia s3 kdmconfig
Synopsis: SunOS 5.8_x86: Updated video drivers and fixes
Date: Jul/23/2001
Solaris Release: 8_x86
SunOS Release: 5.8_x86
Best regards
Michael

Will my NVIDIA GeForce FX 5200 Ultra graphics card drive a 30" display?

Similar Messages

Maybe you are looking for