Will my Printer not print Currency?

I have an HP Photosmart Premium Printer.  Using Windows 7 64 bit OS.
This morning I was trying to copy the Currency that I was depositing in our rental account (the tenant paid a deposit in cash).  I printed the deposit slip and the first two bills and it printed with no problem.  When I loaded the next three bills, it would start to print, get about the top 1/4" or so of the bill and stop.  It is printing and copying everything else ok but refuses to copy the currency.
Is this something that is a safeguard built into the printer so that it won't copy currency?  I'm thinking it might be to avoid someone trying to copy bills illegally.
Thanks for any help you can give me. 
This question was solved.
View Solution.

That is correct as it is a Federal Offense to copy money and you can get arrested.  All printers have built in sensors that will not print currency.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • My printer is Hp printer 932C it will only print in black and white not color

    my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

    There are a few things to check:
    Make sure the blue tape has been removed from the nozzle plate.
    Print a diagnostic page as shown in method 4 here.  Does this page print color?  If so the issue may be your driver settings.  Check for a "Print in grayscale" setting and uncheck this box.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    when i send a PDF file to out side print, some of the things I aded dose not print.
    Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

    for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

    For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
    A couple of thoughts:
    (1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
    (2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
    (3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
    In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
    (4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

  • Cannot print in Adobe 9 it will only print to file which does not work

    I cannot print a PDF file that is in Adobe 9.  It is not the file, I opened several other files and they all do the same thing.  INstead of printing.  When I click OK after choosing the printer, it goes into a print to file mode.  The print to file always fails and then it will nto print.  This morning it was working fine.  Now it will not print. It may have installed an update to Adobe 9, I do not remember it being 9 before.   I am in trouble if I cannot print tonight.  Any ideas?

    WHat is a "print dialogue?n  How can I find it"  There is nothing that I can find called print dialogue.
    Where do nI find "print to file in order to disable it?

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Printer will only print 280 X 202 and not full A4

    When I print or copy from my Deskjet 3050A J611 series, it will on print or copy 280 x 202, not the full A4 (297 x 210). The scanner however does scan the full A4. Printing problem is happening with both Word and Photoshop programmes. Any ideas?

    When I print or copy from my Deskjet 3050A J611 series, it will on print or copy 280 x 202, not the full A4 (297 x 210). The scanner however does scan the full A4. Printing problem is happening with both Word and Photoshop programmes. Any ideas?

  • I have Canon Pixma MP560 printer that I would like to connect to my I Mac wirelessly. I do not have the set up CD_ROM as the printer was used by another person previously. Will this printer be compatible and can I download the software needed from inter

    I have a Canon Pixma MP560 that I would like to link up with my I Mac (snow leopard 10.6.8) wirelessly. The printer was owned by another person previously and I do not have the set up CD-ROM. Will this printer be compatible and can I download the required software from the internet?
    Thank you.

    Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions.
    Either call Canon or visit their customer support website.

  • When i want to print an email, it will only print the address and not the attachment why

    When I receive an email that I want to print, the printer will only print the address and not the attachment with the message or a picture.   Why?
    HP Photosmart C6180 All-in-One

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and where are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Why will my HP6510 not print to photo tray when I print directly from my computer?

    Why will my HP6510 not print to photo tray when I print directly from my computer?
    I am able to print to the photo tray when I print from a memory card, inserted directly into the printer.  However, when I try to print a picture saved directly to my laptop through my wireless connection, the picture prints from the main tray.  If I take the paper out of the main tray, I get the out of paper message.  When I first bought the printer, I had no problems with this issue.  The printer is about 2-3 years old.  I have gone into the HP software on my laptop and set the preferences for photo tray, along with the size I wanted and the photo paper I was using.  By the way, it is HP photo paper.  I have also done the same on the print screen on my laptop.  In addition, I have gone into preferences on the printer itself and chosen "Prompt for photo tray."  I have also uninstalled and reinstalled the HP software on my laptop.  I successfully printed the "practice picture" during the reinstalling process.  None of this has solved the problem.  
    I have no problem printing a document from my laptop wirelessly to the printer. 

    Hi mountainnana,
    Thank you for your response, sorry the guide was not what you were looking for.
    Here are some other suggestions:
    Open the HP Solution Center (icon is normally on the desktop.) Click on Set Preferences, Click on the Paper/Quality tab, for the Source choose Tray 2, choose the right paper size and media type. Click Apply, and then OK. Then try printing your photo again.
    If that does not work there could be a driver/software conflict happening. If that is the case please try our HP Print and Scan Doctor.
    Otherwise, proceed with a uninstall and reinstall of your printer software using the HP Printer Install Wizard for Windows.
    Hope this solves your issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How  can i print currency symbol in smart form?

    how  can i print currency symbol in smart form?
    i want to print the currency symbol with grant total based on the vendor currency.
    pls hepl............

    Hi,
    think You can't print the symbols for currency like $ and Pound etc
    see this doc if needed
    A variable in SAPscript is called a symbol. There are the following types.
    • System symbol (e.g. the number of the current page)
    • Standard symbol (usable in any document)
    • Program symbol (value from the print program)
    • Text symbol (“local variable”)
    The value of a symbol is text for using within SAPscript code and is represented by the symbol-name enclosed by ampersands. On seeing the tell-tale ampersands in SAPscript code, you sometimes need to figure out the symbol type.
    goto any PAGEWINDOW's Text elements in Script (SE71)
    from the Menu-> INSERT-> Symbols
    you find all symbols here
    System symbols
    System symbols in a SAPscript form are comparable to system fields like SY-UZEIT in an ABAP program, and include these. The graphical editor offers three types of system symbol.
    1. General system symbols
    See the table TTSXY. PAGE is the most widely used. The list given in our BC460 training manuals is out of date.
    2. SAPscript system symbols
    See the dictionary structure SAPSCRIPT. SAPSCRIPT-FORMPAGES is the most widely used.
    3. ABAP system symbols
    For the ABAP system field SY-UNAME, say, the symbol is SYST-UNAME. http://SYST is the dictionary structure for ABAP system fields.
    Sample code:
    User: &SYST-UNAME&
    Page &PAGE& of &SAPSCRIPT-FORMPAGES(C3)&
    Standard symbols
    Standard symbols are maintained centrally (in the table TTDTG via transaction SE75) for use in any document. Menu path:
    Tools
    Form Printout
    Administration
    Settings
    Some standard symbols are SAP-standard and others are custom. Curiously, table TTDTG is cross-client although SAPscript forms are not.
    The value of a standard symbol has to be defined for each language used. This gives a way to make a single SAPscript form multi-lingual.
    We can take advantage to an extent of the central maintenance, though there is no guarantee that the available standard symbols will used in every appropriate context.
    Standard symbols complicate searching a SAPscript form, since text like ‘Charity registration 211581’ may be hiding in a standard symbol.
    Text symbols
    A text symbol is declared and assigned to within the SAPscript code, and so obviously applies only to the current document. The command DEFINE is used, requiring /: in the tag column, as in the following examples.
    /: DEFINE &COMP_NAME& = ‘University of Warwick’
    /: DEFINE &WS_RATE& = &TAX_SUMM_C&
    Reward points for useful Answers
    Regards
    Shiva Kumar

  • Laserjet 2100 will only print one page at a time.

    I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.
    For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer.
    "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>".
    Current Situation: The above command line parameter when executed is working as expected in a User's Workspace.
    When executed in a command line on the Application Server, it is working as expected.
    But, the same is not working while executing it from Deployed environment.
    Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2.
    Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • CS5:  will only print in black and white after upgrading to yosemite.  I have updated all drivers and cs5.  Still prints in bw/greyscale even when picture is color.  Advice?

    Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw.  I can print in color from Word but not photoshop.  I have updated all drivers and cs5.  Any suggestions would be appreciated. Thank you!

    Since upgrading to Yosemite on my Mac, photoshop cs5 will only print in bw.  I can print in color from Word but not photoshop.  I have updated all drivers and cs5.  Any suggestions would be appreciated. Thank you!

Maybe you are looking for