Will Networks Drives are in the roadmap in Final Cut X? if so, what is the timing for this version?

Hello,
We have some customers that desire to keep in the apple strategy with the features of FCP v7. With the new FCP X they lose the ability to share the media through different workflows. Ingest, Editing, trascoding, MAM and delivery will take long time moving the data from SAN Drives.
Some of them currently use the Scale out architecture as advantage to reduce the time to produce media faster but it is necesary to deliver this production to a network drive. So, is there any workaround or timing to deliver the FCP X version to use network drives? Will it be soon?
I´ll appreciate any news.
Julio Ortiz

Speculation about future software is against the terms of use of the forum.
Network drives can currently be used and accessed from FCP. Only one FCP editor can access it at a time.

Similar Messages

I have a operating system of 10.4.11 If i upgrade to 10.5 leopard,will i be able to still use my final cut pro 5.0.4

I want to upgrade my operating system from 10.4.11 to leopard 10.5 Will i still be able to use my final cut pro 5.0.4 on the 10.5 version once i upgrade?

angelfromklamath wrote:
So can i upgrade my final cut pro 5.0.4 to 5.1.4 ? O
Perhaps Kaz-k can say for sure what's involved in upgrading from 5.0 to 5,1. If not, I suggest you re-post that question in the Final Cut Studio forum. I'm sure that some of the contributors there have first hand experience with the process of that specific upgrade.
Russ

HT4623 my new i phone 5 say the sim card u inserted i this i phone in not sported but i put in another one the sim card work what can i do for this

i buy anew i phone 5 from ksa from karfor market to use in egypt
when i insert the sim inside i the i phon dosnt work and say the the sim card inserted in this i phone is not supported
so i try the sim in another i phone it work
what can i do for this proplem

The iphone where the sim didn't work is probably locked to a carrier. You need to contact the carrier of that phone. If it's unlocked, then I'm not sure what the problem is, given that the sim works in another phone.

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do?

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do？

Hold down Command-R to get to Recovery_HD, a special Volume on your Hard drive that has some Utilities and an Installer.
Start Disk Utility.
Select you boot drive and click "Repair Disk".
Post any error messages.

HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

See
http://support.apple.com/kb/TS4215

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise).

I am trying to down load an audible book an I get a message that I can't because my phone will only accept two audible accounts. I only have two accounts. what is the problem?

I am trying to down load an audible book an I get a message that I can't because my phone will only accept two audible accounts. I only have two accounts. what is the problem?

I don't seem to understand your question, will you provide more information.

During the installing the FCP the massage are came "Final Cut Pro Failed to Download use the purchases page to try again" what mean by this i have to purchases again?please help

During the installing the FCP the massage are came "Final cut pro faild to download use the purchuses page to try again"what mean by this i have pruchuse again?

Hey Hamidpetra!
That message is referring to your past purchases page for the Mac App Store. More information on this can be found here:
Download past purchases
http://support.apple.com/kb/ht2519
Use the information in this article to find your past purchases and re-download your copy of Final Cut Pro. Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have put several clips with transitions into the timeline in final cut pro. There are two clips which are followed by transitions which do not play at the right speed. It is extremely frustrating, can anyone help?

I have put several clips with transitions into the timeline in final cut pro X. There are two separate clips which are followed by transitions which do not play at the right speed. I'm at a loss as to why this is happening - any thoughts/help?

The two HD clips were purchased from itunes (MPEG - 4) and converted to .mov for use in Final Cut Pro. Project properties - 720p HD 1280x720 (60p)
Is this enough information?

There is no sim card installed in the iphone you are attempting to activate what i can do for this massge

there is no sim card installed in the iphone you are attempting to activate what i can do for this massge

pop out the sim card and reseat it in the tray
if that doesn't help do a hard reset on the phone by pressing your home button and your on/off button at the same time till you see the screen go black and an apple logo appear

I've read that OS X Lion will require 2 g's of memory, but the official site says nothing about memory. What's the case?

I've read that OS X Lion will require 2 g's of memory, but the official site says nothing about memory. What's the case?

Under Pricing and Availablity in this press release they mention 2 Gigs of ram.
http://www.apple.com/pr/library/2011/06/06Mac-OS-X-Lion-With-250-New-Features-Av ailable-in-July-From-Mac-App-Store.html
Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM. The Lion upgrade can be installed on all your authorized personal Macs.
Regards,
Captfred

Hi Apple! My iphone 4g has restored and I can't retrieve the account. I have tried the password renewal that will be send on my mail but unfortunately my mail has been deactivated also.what is your solution for this kind of cases? This is so unfair.

Hi Apple! My iphone 4g has restored and I can't retrieve the account. I have tried the password renewal that will be send on my mail but unfortunately my mail has been deactivated also.what is your solution for this kind of cases? This is so unfair.

http://support.apple.com/kb/HT5312
If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466, and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
HTH

Would I still be able to fun Final Cut Pro with no problem with the new 13"

My old MBP has "NVIDIA GeForce 860M GT with 128MB" and the new 13-inch MBP has "NVIDIA GeForce 9400M graphics" I don't really know what "GT" means, but the more expensive MBP's listed have it, so I'm guessing it's pretty good. I was wondering if I'd still be able to fun Final Cut Pro quickly if I got the new 13-inch MBP.
Back in 2007, the guy at the Apple store said I'd have to get a MBP instead of a MB if I wanted to fun FCP correctly, and now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function correctly on the new 13-inch MBP?

Eric wrote:
Incorrect about what? I never made any statements, just questions. According to the Apple store, the Macbook and 13-inch Macbook Pro both use the same chip, which is the only statement I made. And which is why I'm wondering if the new 13-inch MBP can even handle FCP since the MB can't (according to the guy in the Apple store).
Actually, your original question was formed as part of a statement:
now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function >correctly on the new 13-inch MBP?
And that's the part that BoyHowdy pointed out that you are "a little incorrect" about. While it's true that they both have an onboard 9400M graphics chip, you are overlooking the fact that the 15" & 17" MBPs also have the much more powerful and dedicated 9600M GT graphics card. This is not an insignificant difference. Final Cut Pro, not to be confused with Final Cut Express (not you, others have confused the two), requires a dedicated card which the 15" & 17" MBPs have in the form of the additional 9600M GT, but the 13" still lacks.
The specs on the Final Cut Pro page are a little confusing because while it says it *will not work* with integrated graphics, it specifically refers to Intel, and does not mention Nvidia. However, it still says it requires an AGP or PCI Express card, which the 9400M is not.
My feeling is that even if it runs, the performance of Final Cut Pro on that system will be unacceptable, and will ultimately drive you mad. It really pushes the graphics systems hard, and despite their vast improvement over the pathetic Intel onboard graphics systems, the 9400M is still pretty anemic for high end work. You're better off saving a little more money and getting the low end 15" model. Not to mention, the extra screen real estate makes a huge difference with the very crowded Final Cut Pro UI.

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

"compatible driver isn't available for this version of Windows"

Using Windows 7 x64 on a Thinkpad T500.
Got this message when I ran Windows' troubleshoot:
"Your wireless network cardhas stopped working properly because a compatible driver isn't available for this version of Windows. The model name of yourwireless network card is Ericsson F3507g Mobile Broadband Minicard. This device is distributed by many different computer manufacturers."
It keeps looking for drivers for my PCI Serial Port and PCI Communications Controller. I downloaded and successfully installed the most recent driver for Intel AMT but it did not fix the problem. According to the ThinkVantage Toolbox all my hardware is fine.
Is there a solution to this that I'm not finding online?

caveman we need to know the model of the laptop and the version of Windows you are running.

Will Networks Drives are in the roadmap in Final Cut X? if so, what is the timing for this version?

Similar Messages

Maybe you are looking for