Will new Intel macs support OSX Tiger?

I work in a testing environment and I need to setup another Tiger computer. We have a few intel macs that have tiger. I need to get another machine and set it up with Tiger. If I purchased a new iMac or mac mini, is there a release of Tiger that will run on these PCs? Also, I have been trying to look for a retail release of Tiger that supports Intel processors. Was a product like this ever shipped?
Thanks.
Kelly

kelly, welcome to Apple Discussions.
Macs can only run an OS version that they shipped with or a higher version. So if you are looking at a new Mac that has Leopard installed, it can't run Tiger. You'll have to buy an older Mac.
You can look at this list of G4 & G5 Mac's specs to find which newest-older model will run on Tiger. http://www.everymac.com/systems/apple/index.html
 Cheers, Tom

Similar Messages

  • Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Hi, hopefully you guys can help me out, I just
    purchased a G5 iMac to replace my aging dell desktop,
    and now i'm more or less completely os x dependant
    (I've had an ibook for a few months now). Anyway, I
    have a few questions:
    1. Does anyone know of a (free) mail notifier tool,
    that will alert me when I recieve new pop3 mail? I
    used to use AIM for this in windows
    The built in email program does sound an alert for new messages.
    2. Anyone know of a good (free, again) IRC client?
    iChat works well.
    3. I noticed earlier that my screen was flickering,
    it seems to have subsided for now, but is that normal
    to encounter in a new display? It wasn't really bad
    flicker, but I could see it.
    No idea.
    4. I leave my desktops on 24/7x365, will that be a
    problem with this iMac? Display shuts off of course
    after 30 mins
    You could set the iMac to go to sleep after non use. My Macs are
    always sleeping when not in use, waking them up takes seconds.
    Unlike windoze, never knew if it would be locked up or not.
    5. Should I get the extended warranty? I'm usually
    against them, but I am expecting this computer to
    last me at least 3 years (for $1300 it better!)
    before I upgrade, as I got that much out of a Dell
    and from what I understand, Mac's do not age nearly
    as fast as Windows pc's.
    It is well worth the cost. Never know what might happen. Also
    it is good insurance for future upgrades. I traded in my G4 tower
    purchased two years ago for 75% of what I paid for it. Apple care
    transfers, giving the buyer the remainder of your warranty.
    Thank you for any help,
    -Evan

  • Playing older projectors on new intel macs

    hi
    I recently got a new mac intel laptop and found that none of
    my projector movies are supported by the system. This includes
    pieces made between 1998 and 2006 on versions of director upto 8.5.
    Actually a piece I finished in Febuary of this year is showing as
    not supported!
    Is all this work obselete now? Are there any third party
    solutions to getting these works to still play - other than
    watching them on an older computer. Or would they work if I
    republished the movies from the source files with an uptodate
    version of Director?
    thanks in advance for any help
    nick

    quote:
    Originally posted by:
    Nick Crowe
    ...This includes pieces made between 1998 and 2006 on
    versions of director upto 8.5. Actually a piece I finished in
    Febuary of this year is showing as not supported!
    nick
    Did you mean to say "versions of Director AFTER 8.5"?
    Director versions up to 8.5 were only capable of creating
    projectors that ran in Mac OS 9.x or below. On recent Mac computers
    running OSX, OS9 was able to be run in an emulation mode called
    "Classic". Classic mode is not supported on the new Intel Macs. If
    you use a later version of Director, you should be able to create
    OSX versions of your projectors that are reported to work on the
    newer systems (I don't have a machine to test). Of course you need
    to make sure you have versions of any Xtras that will work properly
    in OSX.
    Hope that helps.
    Hardin

  • Need Advice: New Intel Mac Mini Still In The Box

    Hi!
    Okay.. I know... I have several posts going here as I have several issues I am trying to solve rather simultaneously. Thanks for being patient with me.
    I have my old 1.25 Ghz PowerPC Mac Mini running 10.4.11 and all was well and happy. Then Security Update 2007-009 happened and all went to ....well... you know and, yes, it was bad! Went to Apple, got it running of sorts as they re-installed the OS, but they used an old version of OS X. (10.4.7. Can you believe that?) This caused other problems. It continues to have all sorts of difficulties, as I have had to get applications to re-recognize that the computer is back up to 10.4.11. Currently, I am struggling with trying to get iTunes to access it's music folders on the external hard drives. Realized that I hadn't even gotten around to figuring out whether or not some of my other applications work, like some of the games and third party, etc.
    The thing is I got a new Intel Mac Mini for Christmas and it's still in the box because as I suspected I need to get my old mac perfect again before I can even think about migrating stuff over to the new Mac. But.. here's the thing... it's starting to look pretty much like 2008 will come and go before I can get the old Mac ready enough to take the new Mac out of the box. This really is rather silly!
    Now... I can't get the old Mac to see the music and it made me think. I have all of my iTunes music and iPhoto backed up on an external hard drive (I used Apple's "Back-up" software to do it) and in addition to this two complete copies of the iTunes music and iPhoto photos albums on two separate external hard drives. Should I just forget using migration assistant? Can I get my music and my photo albums into the new mac directly from the external hard drives?
    Or...can I use "back up" to restore the music and photos into the new Mac?
    I am starting to think that the best way to get my new Mac running is not risk it by attaching it to my old Mac. What do you think?
    Thank you so much for any advice or experiences you can give. -Charlotte

    I know that I am vacillating back and forth as to what to do. Thanks so much for being patient with me. All of your advice is really appreciated and I am at least closing in on deciding on my strategy. Probably will follow your first response advice, especially considering that some of the third party apps may not have updates to handle Leopard quite yet. Anyway... it's a good strategy since everything is on the externals anyway.
    You can say that fine.
    Ha ha ha.... yes, I've been messing around with computers since my parents bought our first Apple computer back in 1979. Just like you, I've never had a serious problem with any of the computers and we've had them all, running all sorts of things from the Original Apple and Apple IIc (which my parents still have and it still runs!) to the Commodore and all the Windows permeations and then on to the Macs running Jaguar, Panther and Tiger, probably because we've always been careful with the machines and what we install in them and how we update them. I have always kept my computers on UPS' and un-plug them when storms brew outside. As it is I am still using my eight year old Windows 98 computer, (for games mostly) and it still runs quicker than most peoples windows pcs and it's only a 740 Megahertz.
    I haven't had to re-install anything, especially on this lovely little Mac Mini until now and wouldn't have in this situation, had I known more. I had taken the little Mac Mini in for a Procare "Tune-Up," only four days before the big up-date disaster. Not sure what they did to my mac in the tune-up but the guy gave me back the machine assuring me that the computer was perfect with no problems in answer to my asking "were they sure?" Even after the Genius Bar techs at the Apple Store re-installed the OS to fix the big problems it seems that no one ever thought to run verify disk. Had the Genius Bar techs at the time of the tune-up done this, or at least told me to do this, the last security update would not have wrecked so much havoc. It was only after I got the machine back from Apple that second time that I found that the directory had been corrupted when I ran disk verify. Actually it is amazing that I have had this little Mac Mini for so long and so not have had any problems on it that I would be able to go so long without having to know this really pretty important aspect of keeping one's mac in good running shape. I had been running maintenance scripts and permissions verify and repair and thought that was all there was to it. Silly! You know... that really is a testimony of how nice these little machines are.
    Anyway... experience is a good teacher and I have learned so much it's actually been great! This stuff is pretty interesting.
    Now... on to Leopard!
    Thanks so much and you have a great New Year! -Charlotte

  • New Intel Mac mini: Is 1G Ram Enough?

    Hello everyone.
    I intend to get my dad and my sis (upgrade from her old iMac G3) each a new Intel Mac mini Core Solo.
    I understand that the new Intel Mac mini shares the ram memory between the processor and the "in-built" graphics... also understand from an Apple KB docu that it is best to pair the same ram to maximise efficiency or something...
    My dad will be mainly in iPhoto, organising his digital photos, burning CDs and touching up a bit here and there; And both of them will be using mainly to surf, email, chat, maybe a bit of word processing etc - I would say "light to moderate work"
    So is 1Gb of Ram enough for the processor and the graphics? I would probably try to max out as big a hard disk for them... and a 19" monitor...
    Thanks and cheers

    If he can afford it, I would recommend putting 2-1G modules in there. OS X loves RAM and will call for even more running apps under Rosetta.
    How To Determine Your Memory Needs >>
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
     An Apple User Group 
    ITMS: MacOSG Podcast >>
    Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Compatiability to run Windows on New Intel Macs

    Is it the plan for new Intel Macs to be able to run Windows-based programs without having to run emulation programs like VPC?

    I work in Environmental Science and the amount of
    programs for presenting and manipulating data are few
    and far between.
    Have you looked here for software that you might be able to use?
    Wouldn't this approach open up a lot of avenues for
    Apple and make switching to Apple easier for people?
    Perhaps, or it could make people think of a Mac as just an expensive Windows PC. And developers could say, "If Macs run Windows, then let's save some money by not making a Mac version of our software." And consumers will probably post questions here about how their Windows program won't run right on their Mac, or call Apple asking for Windows support, or get all upset because Windows crashed their Mac and erased all their data and blame it on Apple...
    Apple has said that they will do nothing to prevent Windows from running on Intel-based Macs, but they will also do nothing to facilitate it. This means that if it is at all possible to run Windows on your Intel-based Mac, doing so will be totally unsupported by Apple.

  • Using External Boot Drive with New Intel Mac Mini

    I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
    If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
    Thank you.

    You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
    http://docs.info.apple.com/article.html?artnum=303220
    If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

  • New Intel Mac Mini Start-up Problems

    I've recently purchased a new Intel Mac Mini (my first Mac after switching from a PC). Several times (probably once a day), the mac mini won't start-up.
    I've noticed it happens after I've used iPhoto or iDVD. The mini becomes busy and performance seems to slow. After the software has finished its task, I can exit the application fine and shut down the mini.
    When I then go to boot the mini, the little blue light comes up, but nothing else happens. It's almost as though it's in sleep mode (which it isn't). I've tried different ways to wake it using the keyboard, mouse and start button, but nothing.
    The Mac Mini will only start-up again if it is unplugged from the mains and left for several minutes.
    Has anyone else had this problem? Is there something I'm doing wrong that my lack of Mac knowledge may not be aware of?
    Any help would be appreciated.
    Thanks

    I have been frustrated by the same issue. My (admittedly non-professional) diagnosis is that the problem is related to heat build up. I am able to boot normally only after forcing a hard shut down and waiting for "a while" (5 minutes is not enough, 30 minutes does the trick). Thus my hypothesis that an appropriate cooling down period is needed.
    Any similar thoughts? I'm calling Apple today...

  • Final cut production suite 4.5 on a G4 Quicksilver to new intel mac

    I just order a new intel mac book pro : does Final cut production suite 4.5 ( bought before the intel macs) works on a new intel mac note book? I plan evtl. to buy the update Final cut studio suite 6.0
    What do i have to do , should i install first the older version or can i install the new version directly?
    Thanks for helping me

    You will need to run the studio2 package. All you need to install the upgrade is your original serial number

  • Windows Vista Installation on New Intel Mac

    I bought a full version of Vista about two years ago. I removed it from the Intel Mac I had originally installed it on. Indeed, I've replaced the HD it was on, but for reasons other than removal of Vista.
    I installed Vista successfully on a new Intel Mac, but it won't accept my Product Key.
    I followed the instructions and tried the online activation. After entering a very long string of numbers, I received a curt, automated, "We do not recognize your registration number. Please call back at another time." The line then disconnected.
    Various searches online have produced no result. The Microsoft help page has an article on registration, but all searches from it for my issue lead me back to that same page.
    I assume that the fact that the OS was registered on the other machine has caused a problem, but I note that the license lets me install the OS on one machine. This, I am doing. As the OS was sickeningly expensive, I'd like to reinstall to get some use out of it.
    Any ideas?

    That's sort of what I feared.
    Considering that almost no one buys a "full license" to Windows other than factory installed on a machine or as an upgrade, I figured the problem I had would generally be unusual, except for people who installed it new on an Intel Mac, which is why I posted the question here.
    I've not been able to find on Microsoft's help page a phone number to call Microsoft about this issue, and, as I said, all purported web-based solutions send me right back to the very same web page about product registration. If they weren't a monopoly, they wouldn't be able to get away with this.

  • Trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro

    I'm trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro, but they crash the app every time. files saved 2006 and later load OK. Anybody shed any light on this or know of a fix (other than the laborious work-around of re-saving all early lso's in logic 8 on the PPC and physically moving them via a portable drive to the new machine)?
    (BTW, those files also crash the Logic 7 installed on the intel Mac.)

    Upon further work with my migration, I find I was incorrect in the time frame assertion of these failed files: apparently, the creation/modification dates have nothing to do with it and the reality is that some files fail at random, while others load just fine. right now it looks to be about 50/50 Beats me why this is.
    Anyway, for those interested, I've discovered a very helpful key to the quick processing of file data for a plethora of files (i. e. re-saving the "bad" lso files as Logic 8 projects on the older CPU and moving them over to my new machine), and that is the 'control key/launch' of the app. I hadn't realized that Apple had added this feature to Logic to enable easier work on multiple song files when one does not require the audio.
    For those who don't know about it, the 'control key/launch' provides an option to disable the core audio at app start-up, thus allowing files to load instantly without loading the plug-in library files associated with tracks - great for copying MIDI data between song files, or in this case, re-saving a batch.
    Still puzzled, though, as to why so many older lso files crash Logic when they attempt to load on my new CPU.

  • HELP WITH TRANSFER FROM IBOOK G4 TO NEW INTEL MAC

    HI
    I just got a new intel mac and want to transfer all my stuff from my ibook G4 ... I tried the migration assistant, I plugged in the fire wire and turned on my ibook whilst pressing the T down. I get the firewire icon on my old machine but the new one still says 'waiting for old machine to restart' It just wont do anything when it gets to that point.
    I dont think I'm doing anything wrong but the thing is gettting me aggravated to say the least.
    HELP PLEASE!!

    Karen can't help there but wanted to warn you.
    I did the same thing--iBook G4 to intel iMac, did a "transfer all my stuff" and had problems. At least one G4 program caused my iMac to crash at start-up (it was a special anti-virus program). Also some messy things like the iMac though it was on a wireless network after the copy (like my iBook was) when it was, in fact, on a wired internet connection (it still worked but I got errors in the console log). Just messy.
    Once you get your problem sorted out I'd be careful about which programs I transfered over.
    bobh

  • Will new Intel  "Conroe" chip in Mac towers support more than 4 gig of RAM?

    Hi all,
    long time no speak
    Question:
    Will the new Intel "Conroe" chip in the upcoming Mac towers support more than 4 gig of RAM?
    I score Orchestral and since the new VSL library is completely 24bit i need to at least be able to adress 8 gig of RAM (16 gig would be better
    To APPLE: Guys please be aware that us Pro Users were always eager to adress those 8 gig of RAM in our G5s, but were dissapointed in the fact that Logic FCP etc, were never turned into 64 bit apps.....so adressing 4 gig was it for us........
    I guess another way to ask the same question would be whether "Conroe" is 64 bit, as that is what is required to adress more than 4 gig of RAM.....
    thanx,
    SvK

    Will the new Intel "Conroe" chip in the upcoming Mac
    towers support more than 4 gig of RAM?
    From what I've read Conroe will be 64-bit. A google search of "64-bit conroe" will give you a few sources and more info.
    To APPLE: Guys please be aware that us Pro Users were
    always eager to adress those 8 gig of RAM in our G5s,
    but were dissapointed in the fact that Logic FCP etc,
    were never turned into 64 bit apps.....so adressing 4
    gig was it for us........
    It doesn't need to be a 64-bit application. It just needs to have 64-bit memory addressing. Here is a good article if you're interested.
    http://developer.apple.com/business/macmarket/mathematica.html
    I don't have any experince with VSL, but I did have a quick experience with Kontakt 2 (I sold it). The Kontakt 2 forum has a post from the moderator that explains some issues around Kontakt's memory issues.
    http://www.nativeinstruments.de/forum_us/showthread.php?t=31572
    "furthermore, even Kontakt 2 and related products will not get 64 bit support any time soon since this would require a complete rewrite of the engine - this is the last thing we want at this point! products based on Kontakt 2 are Akoustik Piano and Bandstand."
    The complete rewrite of the audio engine might be the general issue with utilizing more than 4Gb of memory. But, I am not sure...I think there is another issue with how the OS handles memory usage.

  • Will my printer and scanner work with the new intel mac?

    My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
    I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
    Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
    I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
    The responses were
    "At this point in time with have been given no information on whether our printer drivers will work or not....".
    "Yes it will work with OSX 10.4"
    "As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
    I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

    Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
    Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
    Power Mac G4 (AGP graphics)   Mac OS X (10.4.4)  

  • Running Classic on new Intel Macs

    Hi all,
    This is interesting for those of us who may upgrade to an Intel Mac but want to be able to run OS9 software that we treasure.
    Mac TidBits
    Tina
    BeigeMT,RevC G4/500, Rad7K, Siig Controller // DT RevA,G4/400 Mac OS X (10.3.9)

    what did apple do by allowing windows to run on a Mac. if you ask me it is sorta counter productive in a way to OSX sale's. man i want to run OS X tiger on my Beige so bad but its missbehaving by the internal screen going black all the time and locking up the Mac. and i cant mount any cd's or dvd's unless i reboot with a cd or dvd in the drive but only works for a few minute's. man why couldent apple make drivers for the wings personality card on OS X 10.2-10.2.8 to make it work fully. prolly no one will ever make one. but any how that really urk's me on what they did allowing windows on a apple. yea it will boost sale's but thay are also messing with current Mac user's with hardware more than powerfull enuff to run there current version OS X. and now the B&W and yikes will no longer be supported in 10.5 . man that just out right suck's

Maybe you are looking for