Will Non-DSA Simultaneous Cards (such as the 9220) Work with the Electrical Power Suite?
Hello, All!
I wondered if the 9220, and other non-delta-sigma (DSA) c-series modules, will still work with the Electrical Power Suite. From the overview on the product page:
Supported Hardware
C Series Modules
-The suite meets standard accuracy requirements when used with the NI 9225 (high voltage) and NI 9227 (5 A current) C Series modules.
-Compatible modules include any self-timed delta-sigma module such as the NI 9229, NI 9232, NI 9234, and NI 9239. Due to the lower voltage inputs, these modules require external voltage transformers.
-The resampling algorithms of the LabVIEW Electrical Power Suite are not designed for multiplexed modules, such as the NI 9201 or NI 9205.
Note that a few modules are listed explicitly, and it sounds like any self-timed delta-sigma module (eg the 9229, 9232, 9234, 9239) will work appropriately, and that multiplexed modules (eg 9201, 9205) will not work. However, what about non-DSA simultaneous cards such as the 9220? Note also that supported hardware is not explicitly listed in the 2012 EPS Readme, so I wanted to check.
Please let me know!
Will Hilzinger | Switch Product Support Engineer | National Instruments
[originally posted 7-19-2013]
Hello, Fang!
Thank you for the information! The question is from a customer who is an Alliance Partner. They don't have to use the 9220, but would very much like to. Please let me know if you have any further questions for me, and thank you again!
Best,
Will H | Applications Engineering | National Instruments
Will Hilzinger | Switch Product Support Engineer | National Instruments
Similar Messages
-
I have been using my DEBIT card for over a year but recently I had to update my billing information, since then it will not accept my card. All the information is correct, it's just telling me to visit iTunes support. Can someone help me? Much appreciated
Debit card? Are you sure?
USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances." -
Will card nVidia geforce GTx 760 work with premiere pro?
Will card nVidia geforce GTx 760 work with premiere pro?
Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
Thanks
Jeff Pulera
Safe Harbor Computers -
My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.
Make sure there's nothing blocking a contact in the charging port of the phone.
-
Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
Message was edited by: john.rmMost likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
Will a Mackie Control Universal V.2.1.2 work with Logic Pro 9?
Will a Mackie Universal Controller V. 1.2.1 work with Logic Pro 9?
Mine does. There was something If I can remember how to do it about after the update selecting the controller to mackie controller. You have the option within the controller itself to be mackie controller or logic controller. If it powers up and says mackie controller, You should be fine. If you have a problem get back to me, Ill look for the link that tells you how to change it.
-
I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?
Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I would like to know what happen with my battery, if my Mac Pro Notebook is connect to the electrical power all the day. what should I have to do, connecting or disconnect
hi
-
I also tried holding the sleep/power button along with the minus button to reset it and that did not work either. Any help would be great, thanks.
If you update the iPod software to the latest version (1.1) you should be able to power off the iPod. If that doesn't work especially since you restored it's most likely a hardware issue with the iPod. If so, contact AppleCare or visit an Apple Retail Store so they can setup a repair for you.
-
Anyway, not sure if my question was sent, so here it goes: My friend's G4 won't power on....the power button lights up briefly when pressed, but nothing happens....and, cannot even get the montior to power on...does the same thing. He said it used to at least turn on, but now it's doing this. Help!!?? What should we do??
If you are able to use a multi-meter, you can test to see if the power supply is culprit. Use the Power Mac G4: Power Supply Voltage Test (Sawtooth G4) document to aide you in the proceedure.
If not the Sawtooth, Power Mac G4 (Gigabit Ethernet): Power Supply Voltage Test.
If a Quicksilver, use the pinout of the QS PSU connector here:
http://www.xlr8yourmac.com/tips/MDDps_mods/MDD_PSMods.html#update
and a testing description here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/D275729F-09DA-4FBB-96B3-BEEEB2C 04619.html
The test description is for a MDD, but the basics are the same.
If a MDD,follow my instructions in the linked articl above.
One should also try a PMU reset:
http://support.apple.com/kb/ht1939
One should also replace the 1/2 AA PRAM battery.
Also, check that the 20, 22, 24 pin connector is properly fitted to the motherboard, and that the wires are properly inserted in the connector. There is also a 10 wire ribbon, which goes from the motherboard to the power button board. Make sure that the ribbon is firmly connected at both ends, and that there is no apparent damage to the ribbon.
If the power supply tests good in a MDD, the power switch board could be suspect. -
iPhone5!!!!!!!!!!:-(
Will not work with sd card adapter.. Why not? Someone please address this issue. I get tired of lugging my iPad to the trail cam near my deer feeder. Please make it work with my phone..There is no card reader for iphone
-
hi there, i am very upset since my iphone 4 stopped working, last night i connected it to my macbook pro and showed me that a new update was ready for4 my phone, i click on it and it started showing that it was downloading, afterwards when it was downloaded i continued to update the phone, just before the blue bar was showing that was almost ready something happened and showed me on the screen errror 6 (what is error 6?) after that it showed me on nthe screen that i needed to restore my phone in order to keep going, at this point it was showing on the screen the symbol of itunes and the little usb cord, after that it got stock and then it went black and never turned on again, my phone is dead, it doesnt work at all not connecting it to the computer nor the electricity, i dont know my IMEI number or serial number cuz i cant even turn it on, i dont have the box where it came either, what do i do? i need my phone to work asap. can u help me giving me a call with some instructions? right now i am in Mexico and i will be here for a while so i definitely need my phone working. can u call me please to a local numer. the number is 00529981091605, you can call me anytime, this is urgent.
MARIO JAIME.Hold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/ -
I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?
Did you use the nVidia Hack http://forums.adobe.com/thread/629557
-
QUICK - Will a 4200RPM 160GB 2.5" x 1/6H work with Macbook
Will a
4200RPM
160GB - Sata ATA 150
2.5" inch 1/6H
internal hard drive
work with my macbook?Given the specs are right, which they look to be, then you'll be fine.
-
Will my 5 year old lg flatron monitor 1730S work with a new mac mini ? thank you.
Will my 5 year old ( hardly used ) LG flatron monitor 1730S work with a new Mac Mini ? Thank You. Robert.
You don't say what sort of Inputs it has available, but if VGA, DVI or HDMI then yes, you might need to buy an adapter of some type though ...
Maybe you are looking for
-
Can't print a PDF on 11x17 paper
I am using Acrobat 10.1.9 on a mac OS 10.8.5 and can not print a PDF on 11x17 paper. Even if I change the default paper size to 11x17 in my system prefrerences, it doesn't recognize the default setting, and prints on 8.5x11 paper no matter what. I
-
Is there a way to upload Photos to iCloud in small groups
The new Photos app is causing havoc with our home Internet. It seems to be hanging up and working, if at all, very slowly. Apple Support didn't seem to see a problem. But when the upload to iCloud option is turned on, our home Internet speed goes fro
-
Why does Firefox show up as a drive?
I'm still new to Mac so please explain this to me as easily as you can. So i just installed Firefox then i dragged the icon to the bar on the bottom of the screen. But when I want to use Firefox it appears as a drive on the desktop. It does this when
-
Cannot view seesion via weblogic admin
We run Weblogic 8.1 with our Peoplesoft installation (on tools 8.44). One of our webservers will not show me the active http sessions. Under deployment status for PIA is says 'Unavailable'. I've verified that the server is taking on seessions by offl
-
We are parsing connection-information to Discoverer so that the user does not have to log in themselves. But in the url you can se username, password and database name. How do I hide the connect string in the URL, or at least show the password as ***