Will not allow me to answer or make calls
Whenever I try to make a call, or answer one, nothing happenes at all. Please help!!
Hello jennyveyna
Take a look at the article below to troubleshoot issues with making and receiving FaceTime calls. It will have you look at checking the Wi-Fi settings as well as looking to make sure that there are not blocked ports that could be limiting the connection.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
-Norm G.
Similar Messages
-
My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.The connection works because once I do select the device...I can hear and speak. Any ideas?
Thank you templeton peck, I just rang them, turns out my contract doesn't allow it!
-
Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
RogerHi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected] -
Firefox will not allow me to click on more than one link in a sequence. After one click, I am forced to switch to another active application before returning to Firefox and clicking on another link. I have seen this problem posted by others, but I can't find an answer by Mozilla. Since this problem makes Firefox virtually unusable (version 3.6.8) I would hope that Mozilla would offer an answer ASAP. Until then, I'm stuck with Explorer.
== This happened ==
Every time Firefox openedDo you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
When I attempt to save a new bookmark and want to save it in a folder the window that typically appears just below the address bar will not stay on the screen. It flashes on the screen and as soon as I move my cursor over it, it disappears. It will not allow me to make a selection of any kind. If I randomly hover over the general area the window will flash back in view but disappear again just as quickly. If I then show all my bookmarks, the bookmark was saved and I have to move it to the folder I actually want it in. Just a few extra steps, but still very annoying. Please help!
DID YOU FIND A SOLUTION???I HAVE TH ASAME THING AS WELL
-
Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks
Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable. -
new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc
My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod. -
MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.
babowa, it seems like it is using Fuse & NTFS, so I don't think it's the classic WD + 10.9 mess, but extra WD tools & drivers can still break things MtTran.
MrTran, if you must use unsupported disk formats on your Mac you must also consider actually paying the developers that made the trial software.
It's probably a good idea to follow the developers removal instructions, reboot & then install one tool at a time.
MacFuse, FuseOSX, NTFS-3G are all likley to confict if you run older versions so you need to be sure you are using the latest version. I can't remeber which one depends on the other, so you will need to read the manuals.
When the disk is readable copy the data to another disk. You could probably do this from a Linux distro or Windows if OS X won't do it.
If you insist on only using the trial versions you will need to reinstall Mac OS, copy data off this disk & reformat it.
Is there any good reason for not using the Mac HFS extended format? -
I redeemed my iTunes card but it will not allow me to make any purchases
I redeemed my iTunes card but it will not allow me to make any purchases please help.
Have you Contacted Support as requested...
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html -
Why is it that Firefox v.14.0.1 will not allow me to Sign In to Microsoft Answers
Here is a copy of an email I sent to Microsoft Answers :-
Why is it that Firefox v.14.0.1 will not allow me to Sign In?
I have successfully signed in with Google Chrome v.21.0.1180.79 m without any problem, but when I attempt the same thing in Firefox the following "Sign In" message appears:- "Signing in...
This page will automatically update after you are signed in.
If you are having problems, you can close this message and try to connect again."
Reloading Firefox and using the same Page has no effect what-so-ever.
Any ideas?
lockhands.
Their retort was:-
"How is this related to Windows Update?
How is this related to Microsoft?
Ask in the Firefox forums:
http://support.mozilla.org/en-US/questions"
So I hope you can help me with this question, please.
lockhands.i visit the same page and got the same message except the popup blocker was blocking the sign in page from loading.
you could try using the following link to see if you can get to the login screen if it works you could add it as a bookmark until you find a solution.
http://answers.microsoft.com/en-us/Site/StartSignIn?provider=wlid -
Jusat the other day i started getting prompted for Security Information required when trying to download apps. on my Ipodtouvh 4Gen. Typically when I download an app. I get asked for my apple ID and then it will allow the download. This new prompt pops up after it looks like the app is downloading. It gives me the option to cancel which will not allow the download or I have to select Security information. It then brings me to a screen where it asked for three questions but as I put the questions and answers in it bumps me back to the screen of the app I was trying to doenload. Any clues???
this has recently been happening to other people. We think that it is a fault at apples end of the line. However in the cases i have seen the problem fixes itself and it goes back to normal after a day or 2 you just have to wait!
-
Input Text will not allow me to access the correct answer!
Hi All
i am trying to create a simple quiz in school. I have one test question which requires the answer to be -1.
I have created Input text and assigned the variable answer for this question.
I have a button with the following AS2 script:
on (press, keyPress "<Enter>") {
if(answer eq "-1" or answer eq "minus 1"
or answer eq "Minus 1" or answer eq "Minus one" or answer eq "minus one")
{_root.gotoAndStop(2)
} else
{_root.gotoAndStop(3)
Firstly whatever you type the numerical keys are immobilised on the keyboard when the .SWF file is built
Secondly I cannot enter the correct answer!! If I type in Minus 1 etc it goes to frame 3.
I have tried flags rather than frame numbers - same problem.
i have tried remaking the quiz as a separate file.
using CS4 and CS5 flash - windows 7 PC.
Please help!!
teacheRuss
Ned
Thanks for the reply. I had instances for all elements but had code on teh but (Instance Enter). I have tried your code with my instance names. The button is Q1 (I was going to add more if it worked). The vaiable name for the Insert text box is ans1 so I used the code below. I added the code to frame 1 in teh timeline. I think this is what you meant so a frame script as opposed to a buton script. i have always scriped buttons (very simple). I have played around with the trace(); function but i am not sure where to run it from. I have added it to the script below. I tried Q1 which is the button and ans1 (variable). It must be wrong as I cannot see any output. Last thing. Is it not right ot use eq and or?? I am using Actionscript 2.
The disabled keys is the same running the code on my mac and pc!
Q1.onRelease = function() {
if(ans1.text == "-1" || ans1.text == "minus 1" || ans1.text == "Minus 1" || ans1.text == "Minus one" || ans1.text == "minus one") {
_root.gotoAndStop(2)
} else {
_root.gotoAndStop(3)
trace(Q1);
Ned
Thanks for the reply. I had instances for all elements but had code on teh but (Instance Enter). I have tried your code with my instance names. The button is Q1 (I was going to add more if it worked). The vaiable name for the Insert text box is ans1 so I used the code below. I added the code to frame 1 in teh timeline. I think this is what you meant so a frame script as opposed to a buton script. i have always scriped buttons (very simple). I have played around with the trace(); function but i am not sure where to run it from. I have added it to the script below. I tried Q1 which is the button and ans1 (variable). It must be wrong as I cannot see any output. Last thing. Is it not right ot use eq and or?? I am using Actionscript 2.
The disabled keys is the same running the code on my mac and pc!
Q1.onRelease = function() {
if(ans1.text == "-1" || ans1.text == "minus 1" || ans1.text == "Minus 1" || ans1.text == "Minus one" || ans1.text == "minus one") {
_root.gotoAndStop(2)
} else {
_root.gotoAndStop(3)
trace(Q1);
I am wanting to buy music from my account..I have had to change my password,which I did. Now it wants me to answer security questions. When I pick the question,it will not allow to type in my answers...I can't even do the rescue message..this is SO frustrating
Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use
Neither our my kids iphones will allow them to purchse music or apps...it takes them to security questions which we tried to anwser but keep coming up wrong...will not allow me to reset them - help
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
VSS-00011: Connection to database instance <instance_name> failed. Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance. Action : Run the Oracle VSS Writer S
-
Hide values in Stacked Horizontal 2D Column chart
Hello. I have created a stacked flash chart, and everything is good except one thing. The values and name of each stacked column is written within the bars of the graph. I have played with all of the variables and can't seem to remove them. I have a
-
APD Issue - Text not showing up
Hi All, We are configuring APD to run a 'query' and dump 'Large files' on to a directory path in Application server. APD is simple, Query - Transformation - PC File. This solution as such is working fine. However, even if the 'Query' is set to displ
-
How to delete a user permanently in portal..
hiii... My user id has been locked. Now i want to delete it permanently.... how can i do this.
-
Function Module to read in IDOC
Hello all; I'm looking to locate a function module where I can read in multiple IDOCS including it's segments and data into internal table. I need something that will allow me to draw multiple IDOCS if I have to pass the IDOC document number to a FM