Will not boot in Lion

Help! Final Cut Pro 7.0.3 will not open now that I've upgraded to Lion. Any ideas? Delete preference files?

Update : It booted after several attempts and a spinning beachwheel saying (Final Cut Pro is Not Responding). Open now and seems ok, maybe had to load preferences or something... who know.
Lion is fast btw!!

Similar Messages

HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

I recently upgrade my OS and now my MacBook Pro will not boot up

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

Imac has white screen and spinning wheel and will not boot up---after lion install

imac has white screen and spinning wheel and will not boot up---after lion install

Please read Gray screen appears during startup.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

I'm trying to use idvd '09 version 7.1.2 on a powerbook running lion 10.7.2, the system does not locate any themes and therefore will not boot up, any suggestions?

i'm trying to use idvd '09 version 7.1.2 on a powerbook running lion 10.7.2, the system does not locate any themes and therefore will not boot up, any suggestions?

Hi
May be help here
iDVD Themes
iDVD 1 to 7.0.4
Root level = Macintosh HD / Library / Application Support / iDVD / Themes
or
Macintosh HD / USERS / Your name or login identity / Library / Application Support / iDVD / Installed Themes
iDVD 7.1 (from F Shippey )
The iDVD 7 themes are part of the iDVD 7 application package.
iDVD - ctrl-click Show content of package
Resources / Plug-ins/ - and here they are
See if You can restore them manually.
Yours Bengt W

Macbook Pro will not boot up normally ***Not Normal Problems***

Ok. I have an older 17" Macbook pro 2.33 (10.6 fully updated) that will not boot up in normal mode. When I boot it shows "blocks" of different colors and will not get past the blue screen sometimes. When it does get passed the the blue or grey screen it is a split screen of white back ground with large black blocks seperating the sides. I have tried swapping out harddrives with a known working one with an OSX image on it-no good. I have tried swapping out ram-same thing. I reset the SMC and PRAM-only colors changed in the blocks. I have ran disk utilites disk and permisions with no problems. I can't boot into a restore disk using the c key during boot, It locks up at the same screen. Nothing works except safe mode. I can boot into safe mode and everything works just fine with normal screen and all. Now I tried runing the Lion installer thinking it is and driver issue but I can't get Lion to boot to the hard drive and Snow leopard just reboots back to the same screen. So how can I get Lion to install or Snow Leopard?
What can I do? I noticed this last weekend when I tried to reboot my MB Pro and it started this. Well Apple pushed and update last friday - I needed to restart it again and this happends. I thought it was a logic board at fist until it booted fine in safe mode.

Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
What I can't understand is why it runs fine is Safe mode?
Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

Install Disk for Snow Leopard will not boot on an iMac 27in

My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
I like Apple, but sheesh do I hate Lion right now.

White Macbook 13" will not boot - Stuck in Safe Boot mode

In a nutshell --
macbook will not boot. Originally it was stuck on the gray screen with spinning wheel. Here is the course of action taken thus far (in order)
1. Reset SMC -- removed battery, pushed power button for 5-1 seconds. Rrestsarted. Nothing. Still with the gray screen etc.
2. Tried to restart in Safe Boot mode. -- Macbook will restart and after 25% on the status bar it hangs up. After a 5 minutes or so it shuts down (I assume form overheating as the fan is running wild.)
3. Wheneve I start it now it tires to go in safe mode so I tired to zap the PRAM (opt/command/p/r) No luck. Tried twice. Once after three chimes. Once after 2 chimes. Still tries to boot in safe mode.
4. Tried Recovery Mode (I am running Mountain Lion). Can boot into recovery mode. Ran disk repair and it said all was fine. Would not allow me to repair permissions but I could verify them. I ran verify. No messages came up at all -- thought this was strange. I also tried to re-install the OS but the first time the only disk available to me was the recovery partition. The second time I went into Recovery mode I saw the regular Hard Drive partition but it was grayed out and locked. Considered restarting to an external USB drive but then did not know what I would do then. Might try this tomorrow.
5. Ran Target disk mode with my iMac. The disk did not mount in the desktop but showed up in disk utility with the HD partition grayed out. Could verify and repair disk but nothing was allowed regarding permissions -- all options grayed out.
6. Restarted with Verbose mode. Ran for 5 - 10 minutes and shut down. Last line I saw was "checking extended attributes file" No error message. Again, maybe it was an overheating issue as the fans were going wild and it was about the same length of tome running as in safe mode when the macbook shut down.
OK. The hard drive is a few moths old. There was nothing strange going on with the hard drive prior to shut down. The only odd thing happening was the dvd drive was begining to make sounds upon restart (from sleep or full restart). Like it was checking/reading a disk in the drive. This was especially odd as the drive has been dead/unusable for a few years. (When you a dvd or cd in it could not read). This dvd drive sound happens even now upon each start up.
I do not want a new motherboard.......or laptop.
Thanks.
Robert

Thanks for the prompt response. Thanks for the adivice. I wish i could get it to go into safe mode. It stops after 5 minutes of trying. I am not sure if it is the hard drive as it will boot into Reocvery Mode -- meaning it will let me access the 650 MB parititon Lion has set aside - so that part of the disk is working.
I am headed to the Geniusues soon.

TS1541 iMac will not boot up

I have done a restore from a few days earlier, when it was fine, but now it will not boot up again. It just freezes and when I restart it just sins the little white wheel, but never starts!
Fairly new to apple, so bare with me.

Hi..
When you say "restore" do you mean from > OS X Lion: About Lion Recovery
If so, try again but the startup disk may need repairing using Disk Utilty.
Read all the way through > Hands on with Lion Recovery | Macworld

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

My Mac will not boot up!!!

Hi! My iMac 10.7.5 desktop will not boot up, I just get a white screen after the apple logo.
It will only start in safe mode. Will not go into recovery mode either. I just get a white screen.
I have tried:
Removing all cables and trying to start in recovery mode.
Resetting the PRAM
Fcuk
I have not been able to do the "repair disk" because it is not available in safe mode, and cannot open recovery mode!
CAN ANYBODY HELP ME PLEASE??????? I don't know what to do now. Thanks

Also depends on what you mean, what the red lights inside are showing, whether it is bad system drive, video card, SMC, whether you can get into Mountain Lion Recovery or not. And whether you hear the chime, it powers on or not.
Unplug everything. No power or USB connected.
Remove all the drives and see if you get the "?" on startup.
If you had made a clone of your system and have that 'sittin on shelf' now is the time to use it.
Hit power button for 10 seconds. Wait a minute. Reconnect bare basics (power, video, kb/mouse)

My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

My iMac will not boot into the Apple Hard Ware test. Why is this?

I have a late 2012 27 inch iMac. It will not boot into the Apple Hard Ware test. I do have File Vault turned on. Will this stop it from booting in to the test?

See Using Apple Hardware Test. For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead. An Internet-enabled connection via ethernet or Wi-Fi is required to use this feature. Some computers that shipped with Lion require a software update to use this feature. See Computers that can be upgraded to use OS X Internet Recovery for more information.
Note: your machine cannot be running Mac OS X (10.6.7).
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

Will not boot in Lion

Similar Messages

Maybe you are looking for