Will not boot up from DVD drive

HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive

Hi,
Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Similar Messages

I want to wipe iBook of it's content, but it will not boot up from DVD

Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
Thank you for any help from out there.

No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
How to Nuke an ATA Hard Drive
http://ata.wiki.kernel.org/index.php/ATASecureErase
Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
Linux Release Watch
http://distrowatch.com/

Mini will not boot disks from combo drive

Mini was having "issues." Thought I would do a clean install to correct all problems. When I insert OSX install disk and hold "C" key the computer tries to boot from the disk. The grey screen and apple logo apear. But instead of then going to the little spinning grey bars and booting to the disk, the grey apple shifts to the right and a some trash appears to the right of the logo, the computer freezes.
I have run the computer in terminal mode and run disks on the optical drive just fine.
It simply will not boot off of a disk in the optical drive.
HELP!
12 Powerbook G4, iMac G4 Flat Panel Mac OS X (10.3.7)

Try booting into safemode by holding down shift key. Sometimes it does take up to 5 minutes to boot into safemode but sometimes your atleast able to uses your computer as a temporary fix. If you can't boot into safemode it sound's like your hard drive has failed, in that case you would need to contact apple for a repair.

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

ITunes Will Not Recognize My CD/DVD Drive In My Windows Vista PC.

All,
I was forced to migrate to a new PC for work. It is running Windows Vista Enterprise. Since receiving the PC, iTunes will not recognize my CD/DVD Drive. I receive the following error message:
"Warning, The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing....." etc.
I have completed the following troubleshooting steps with no success:
1. Deleted upper and lower filters in the registry per the Microsoft fix from their web site.
2. Completely uninstalled and reinstalled iTunes/Quicktime/Etc.
3. Uninstalled and reinstalled the CD/DVD Drive
4. Verified that other programs recognize and can burn to my CD/DVD drive. I have Windows Media Player and Roxio Creator Basic installed.
5. Verified that Windows Vista recognizes my CD/DVD drive.
6. Installed the GEAR driver recommended on the Apple Support page for this issue.
All of my music in is iTunes and I prefer to burn my CD's via iTunes. I have read that several people are having this issue.
Does anyone have a solution? There has to be a fix out there somewhere.
I can downgrade to XP but it will take an "Act Of Congress" for my corporate IT group to send me the XP downgrade CD.
Any solutions or recommendations are great appreciated.

All,
I was forced to migrate to a new PC for work. It is running Windows Vista Enterprise. Since receiving the PC, iTunes will not recognize my CD/DVD Drive. I receive the following error message:
"Warning, The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing....." etc.
I have completed the following troubleshooting steps with no success:
1. Deleted upper and lower filters in the registry per the Microsoft fix from their web site.
2. Completely uninstalled and reinstalled iTunes/Quicktime/Etc.
3. Uninstalled and reinstalled the CD/DVD Drive
4. Verified that other programs recognize and can burn to my CD/DVD drive. I have Windows Media Player and Roxio Creator Basic installed.
5. Verified that Windows Vista recognizes my CD/DVD drive.
6. Installed the GEAR driver recommended on the Apple Support page for this issue.
All of my music in is iTunes and I prefer to burn my CD's via iTunes. I have read that several people are having this issue.
Does anyone have a solution? There has to be a fix out there somewhere.
I can downgrade to XP but it will take an "Act Of Congress" for my corporate IT group to send me the XP downgrade CD.
Any solutions or recommendations are great appreciated.

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

Windows media player will not work as no DVD driver

Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

Hi
Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
To watch DVD movies you can use the programs like WinDVD or PowerDVD.
Such programs were designed especially for the DVD playing!
But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
Then you could download and install it to play DVD with WMP
Best regards

ITunes will not recognise my CD/DVD drive

iTunes will not recognise my CD/DVD drive but other windows programs does

Here's the info
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.2.2.12
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0040B0400138AD20
Current user is not an administrator.
The current local date and time is 2011-05-02 23:12:22.
iTunes is not running in safe mode.
WebKit-accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4600 Series
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.12 (x64) is currently running.
iTunesHelper 10.2.2.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
B: HL-DT-ST DVDRAM GH22LS50, Rev TL03
Audio CD in drive.
Found 16 songs on CD, playing time 62:58 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 03:16:25
Track 3, start time 07:08:50
Track 4, start time 10:59:65
Track 5, start time 15:38:50
Track 6, start time 19:56:65
Track 7, start time 24:21:48
Track 8, start time 28:47:25
Track 9, start time 32:04:43
Track 10, start time 36:14:23
Track 11, start time 40:20:10
Track 12, start time 44:06:20
Track 13, start time 47:14:20
Track 14, start time 51:00:68
Track 15, start time 56:10:15
Track 16, start time 58:42:55
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40 48.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The diagnosits can see the drive under 'Optical drive detected' and passes all the tests but it does not show up under 'Devices' (on the left hand panel). I've tried repair under Control Pane/Uninstall a program (twice) removed and re-installed iTunes. I don't believe the problem lies with my drive OR Windows as the drive is visable in all my other programs (Windows Media Player, Windows Explorer, RealPlayer + all my other software that can access a drive.

My computer will not detect the CD/DVD Drive

My computer will not detect the CD/DVD Drive. I am running Windows 7, Home Premium on a HP dv4-1430us

Hi,
Please try the following fix first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

V3-5727105 will not boot up from HDD or from Recovery CD.

4 weeks ago when I switched on my laptop I got a blue screen message during start-up saying a problem had been encountered and it needed to restart to try to fix the problem, then just a dark grey screen and nothing.Laptop is only 7 months old. Contacted Tech Support and they stated I needed Recovery CDs and provided me with a set after I paid £60.Tried to boot from Recovery CD and got Acer Recovery Management to load, but after selecting restore to factory settings the laptop entered into a never ending cycle of 'analysing HDD' , attempting to fix HDD'.Left the laptop running for 12 hours and that was the only two messages I saw on the screen.No option to 'exit as problem encountered' so I had to power down my laptop to escape the 'loop'.Tech Support now wants me to try to format my HDD by taking my laptop to a local PC repair shop.Why am I being asked to do all the diagnosis work on a 7 month old PC? Surely it should be fixed under the manufacturers warranty?Could someone please explain what trying to format my HDD will show?Thanks

Update ..... My laptop would not boot up from the recovery disc as it turned out the hard drive required to be re-formatted to clear the fault. I was told by the PC Repair company that no matter what I tried I would not have been able to fix/clear the fault. Given it appears to have been a software corruption issue, after reading the Acer Warranty I have found out that I have to pay for the repair as the machine hardware remains in g.w.o. and the laptop is back in full working order once again. The PC Repair man did say however that if I had phoned him first instead of Acer Technical Support, I would not have needed to pay Acer for the set of Recovery discs as he would have provided a fresh installation of Win 8.1. at a fraction of the price! Lesson learned.

Lenovo IdeaTab Lynx K3011 Windows 8 Will not boot to usb/dvd

I have tried almost everything, over the course of the past few day's, to get this tablet to boot to usb/dvd drive. Secure boot has been disabled. Cannot access a boot menu on startup. When using windows 8 boot manager and selecting boot to usb cd or usb hdd, the system simply restarts. I have tried many bootable usb keys formatted in ntfs or fat32 with windows xp(32bit), windows 7(32), or windows 8(32). I have also tried booting to a DVD's on a external dvd drive with xp(32), 7(32), or 8(32bit) with no success. Both devices in all cases are recognized in the (UEFI)bios boot manager and I am able to reset the boot order. I have tried hitting the f2 or the f12 keys when booting on an external keyboard. I have tried hitting the power button and the volume up button on startup but this does'nt work either. When I access the UEFI settings I do not have an option to enable legacy bios. The need I have is to boot to a Symantec Ghost usb key with Windows PE for imaging and deployment purposes, any help is greatly appreciated. Thank You.

I created a bootable 32bit following this thread ME400C Wipe and Clean and make sure the USB has to be 32bit and EFI bootable UEFI Bootable USB Flash Drive - Create in Windows.
The plug in your USB keyboard, mouse, Windows Setup USB Drive, change the boot order, disable Windows Boot Manager and it should detect the Windows Setup USB Drive.
**I won't know how to use an external DVD if you don't have access to create this USB drive.

After installing 10.6.8 will not boot even from 10.6 disk HELP

Will only start in safe mode, Safari crashes so no help there to get back to 10.6.7 and will not boot from my 10.6 SL disk. HELP! Can't find the orignal disks so I am in a bad way...

Call AppleCare and request replacement discs. You can also Zap the PRAM and Reset the SMC and see if those will fix things up. You updated to 10.6.8 w/o having a bootable backup/clone or Time Machine backup? Bad move, that.

2013 new Mac Pro will not boot up from and external hard drive

New 2013 MAC PRO running Yosemite will not not see a bootable external hard drive when starting up using option key? Same External hard drive will boot up on 2013 Mac Book Pro running Yosemite.

Reading between tea leaves sometimes leaves some things to imagination.
You used SuperDuper latest version that was recently upgraded for Yosemite on a laptop running 10.10 (or even 10.9.3+) that is in a X-brand USB3 drive enclosure, not bus powered btw, moved it to the nMP and plugged it into a direct port, not going through a hub (monitors have hubs of course and there is only one real bus+controller on the nMP that ALL USB3 travels through.
Thunderbolt and self-powered would be nice but they cost a bit more.
I have read where Carbon Copy Cloner (now v 4.x) worked where others failed. I use to use both but have used CCC since its inception and use back in 10.2.2 forward along with SD! for a few years based on comments here.
Drivers missing? someone compared system extensions and found the ones needed for say the nMP are not there? how about running a 10.10.1 combo update and see if that changes - we USE to be able to apply updates to a system that we were not booted from, very handy (could update a sparse disk image of a system that way, one created with CCC).
WD Passports seem popular with laptop users, but they come here to this forum complaining that it doesn't work, disappears off the bus (spins down goes to sleep, acts like a green drive acts).

2005 mac mini on OSX leopard will not boot up from firewire disk

I have an old mac mini that my son still uses and the super dirve does not work any more. But now the main hard disk needs to some attention from Disk Utility. So I need to boot up from the Leopard install DVD. But of course the DVD dirve does not work so how to do this? I have tried to create a bootable disk by restoring the install DVD to a partition on a firewire drive and this is seen as a bootable drive by my 2008 iMac, but not by the Mac Mini. So is it possible to boot up rom a irewire drive? USB doesn't work either

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

T60 suddenly switches off, will not power on again, DVD drive related?

I have searched and searched for this, and although finding many "T60 will not power up" I haven't
found any with this twist.
My T60 is ~2 years old, and the problem just started recently. Working on battery one day, the laptop
suddenly died - like instant loss of power. I could not turn it on again. One strange thing though:
When I removed the battery and re-inserted it, the batt-icon-light came on briefly (a blink). If I then pushed the power button it lit up for 1 sec and then went out, not booting. Repeating it, without removing the battery, it didn't light up.Ok, thinking maybe the power supply was dead, I took it completely apart, removing also the harddrive and the DVD drive. By chance I then saw that it had "fixed itself". I resembled it and it worked again, powering up like nothing had happend.
Then it happened again yesterday. I read in here about the "push power 10 times, hold power down 30 sec" etc, but had no luck with that. Again, when I inserted the adapter cable the light came on (power plug + batt light) but when pushing the power button they went off, and if I removed and reinserted the plug same thing again.
I then read about removing HDD and DVD drive, and that did it! So, it happened again today and this time I just removed the DVD - and it booted again.
So, after this loong description here I hope that some of you have tried/seen this before or have an idea what it can be. I left the DVD drive out, and it has not happened again...yet (it's been 5 hours only).
Ideas?
Thanks in advance!
Martin.
Moderator edit: Removed duplicate copy of message text.

Kaz wrote:
Hi Nordal,
I know this is an old thread, but since I too am now experiencing inability to startup by T60 and seems to be getting worse in the last months, I was wondering what additional things you may have learned in the last 2 years since facing this issue. My system will typically be in standby or hibernate and when I open lid to start it up again, Power and Bat light go out and cannot start it. No beep codes, nothing. Previously, recovery was to pull battery (which is now new Lenovo as of last month and working great), hit power button a few times and then hold it in, put battery back in and AC adapter, then it would start up. In last few days, this no longer works. I have to go through similar step, but now I have to startup only with battery, once in Desktop, I can plug in adapter and no issue until next time. I have three 90W AC adapter all putting out correct 19.5-20 VDC. Have rulled out an adapter issue, I believe. Concerned about something on motherboard being flaky, but cannot pinpoint issue. A few days ago when this happened, I had to pull CMOS battery, wait a few min., then put everything back together and was able to boot.
Have never pulled anything more than RAM, CMOS battery, main battery, and AC adapter. May have to try DVD drive next time.
Thanks,
Kaz
It's probably best to start a new thread instead of reopening one thats 2-3years old, but from what your describing it sounds like your slowly ruling out everything except the system board, nothing you don't know already.
I don't normally deal with T60's, my main focus is T61, but I do have a source for the boards if you were to need one, as well as having a source to get the older boards reflowed. Some of the older models had problems with solder connections cracking when the board would flex, which can be repaired on an infrared reballing machine. My friend Dominic (realblackstuff from thinkpadforums.com) operates a website where boards are collected and sent off to be reflowed in wholesale lots. It's quite reasonably priced, as are the T60 boards pulled form grade "A" corporate laptops, but lets hope you can find a lesser component that is causing the problems.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Will not boot up from DVD drive

Similar Messages

Maybe you are looking for