Will not burn DVD

Sense Key= Medium ERROR Sense Code=0x73,0x03
I have tried 3 types of blank DVDs JVC -R, Maxell +r and Memorex RW DVDs and I keep gettingthe same orror message. I have tried verifing, mounting and nothing works. Tried I Movie,Titanium 8, and 2 other programs. any suggestions.

I have experienced the same problem as the OP. I got the write errors with both Disk Utility and Toast 9.02 when trying to write to Memorex DVD+R DL blanks.
I guess, if there is such a thing, I can look for DVD-R blanks and see if that makes a difference. I'll also look for Verbatim media.

Similar Messages

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

SuperDrive will not burn dvds

I can burn CDs,play CDs and watch DVDs. I can not burn DVDs. I have iLife but I cannot run iDVD because it is not compatible with of my version of OS. Why I don't know. Why should I have to buy every upgrade that come out? I can live with that, sort of, but why can't I burn a data DVD? I looked for a new driver but there does not seem to be one for Leopard. will I have to buy iLife 09 to bun a DVD?

This is what the system profiler says about disc burning:
HL-DT-ST DVD-RW GWA-4082B:
Firmware Revision: C03D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

Finder/Disc Utility/Toast Will Not Burn DVD+R, DVD-R

I have an iMac that will no longer burn DVDs. I've tried various brands of DVD+R, DVD-R and DVD+R DL all of them do not burn in the finder, disc utility, or Toast. CDs burn fine. DVD+R DL discs burned previously with this machine will no longer mount. I just wiped the hard drive and reinstalled OS X and ran all updates and still have the problem.
Media brands tried: OfficeMax, TDK, Maxell, JVC, Sony.
Thanks in advance!

Hello StraightUp and others
Check thru this Disc Burning Quick Assist link, there are some good troubleshooting tips in it.
http://docs.info.apple.com/article.html?artnum=303599
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

Disk Utility will not burn DVDs

Disk Utility will no longer burn DVDs. I have tried both Memorex and Verbatim DVD+R DL -- Disk Utility tells me the disks are locked, not writable, capacity 0. These are fresh DVDs right off the spindle. I am, however able to write to these same DVDs using Burn, so it's not a media problem. Tried deleting preferences for Disk Utility, tried using Drive Genius 2 to repair the HD, but it didn't show any problems. Any solution short of doing a clean install of the system?

Hi-
Will the drive read any discs?
Have you tried burning a disc at slower speed?
Have you tried a different, quality brand of disc?

N500 Optical drive will not burn DVD's

When I try to burn a DVD +R with the internal Optiarc DVDRW DL in my N500, the drive acts like it is trying to read the disc and then ejects it and asks for a disc. I have tried several discs, each with the same result. I was able to burn DVD's from the same spindle with no problems on other machines.
The drive reads DVD's and will burn a CD.
Any clues as to what could be done to fix it?
If it's not fixable, can I get a replacement DVD drive. I cannot find one on the Lenovo parts and accessories web pages.
Thanks,
Tim Holmes

try to burn -dvds or just try to burn different +dvd brand.

DVD burner will not burn DVD-RW

CPU=Athlon 2000+
RAM=512MB 10ns
PSU=300W 240V
HD=Western digital 80GB 8MB cache ( WD800JB)
Motherboard=MSI K7n2g-L
Bios=4.1
VGA=Nvidia on board
VGA_Driver=6.13.10
Optical_Device=liteon SOHW-1653S
Other=NIL - OS is Win XP
I have a problem with my liteon DVD burner installation. Its a recently released model SOHW-1653s.
The drive has been installed and works fine for DVD-R single write DVD's and CD-R and CD-RW but will not erase or write to DVD-RW media. The errors I get differ when I try various DVD-RW media brands. from "illegal disk type " to " illegal mode for this track "
I put the drive in a socket 370 Celeron running Win 98 and it will burn both DVD-R and DVD-RW OK.
So in desperation, I then shadowed the harddrive on my MSI machine and reformated and reinstalled Win XP. The drive will still not recognise DVD-RW. I also tried various combination of media. mucking around with the IDE BIOS settings, changing around the drive from master slave configs and have uploaded the latest drive firmware and motherborad firmware. I contacted Liteon technical support and they advised to remove the nforce MCP IDE driver in leiu of a default one, but im not sure that is possible not to mention it probabaly would comprmise system performance.
The problem is obviously with the motherboard. Can anyone advise what steps to take to remedy the fault?
Thx

Thx Wonkaboy.
Well I didn't roll back ( to an nvidia dirver ) I went back to standard dual channel IDE driver - the XP provided one and the burner started to work. phew! Albeit at 2x DVD-RW instead of 4x. Not sure why that is....
Then I thought what the heck I'll try the nvidia driver that I had installed on the machine before I wrote the original thread. And guess what it also works. Im not sure what happened. Maybe a dll was not installed or something. I have spent 2 days on and off with all sorts of variations of hardware configurations including an OS reinstall. Anyhow it's working now and thats
PS: The driver that MSI provides is different to the one obtained by going directly to the Nvidia site. ie the nvidia one is 5.10.2600.412 dated 1/13/2004. And the one provided by MSI is 6.1.2600.0 dated 5/13/2002. Im now using the later one. I cannot say if the earlier one works.

My HP DVD-RAM GH40L SCSI DVD burner will burn CDs and DVD+Rs, but it will not burn DVD-Rs.

I have only tried to burn CDs and DVD+Rs before, and both work fine, but when I tried to burn a DVD-R, it failed. I put the same blank DVD-R in my HP notebook computer, and it burned it just fine. This happened twice, so it is not the DVDs. I uninstalled and reinstalled the burner with device manager, but still have the same problem. Is there a firmware update or something that will fix this, or do I just have a defective burner? Thanks!

See This Older Discussion...
Burning TV Shows/Movies

Combo drive will not burn DVDs

My original internal DVD Drive (PIONEER DVD-RW DVR-104) is not recognized to burn DVDs. I can burn CDs just fine. When I insert a DVD-R into the tray, the computer searches for the drive and I get the message " Waiting for the drive" followed by the DVD disc being ejected and the message "Waiting for the disc to be inserted." If I insert a CD, the drive works flawlessly. I have no clue where to begin to correct this problem!

Some of these SuperDrives (not a Combo) appeared to develop
defects, sometimes coincidentally after an upgrade to Tiger, but
not necessarily so related. Could be the optical drive has defects.
Will the computer boot from an OS X installer on DVD, so as to
use the Option key on boot to see if you can select the Apple
Hardware Test (as shipped with Macs whose original OS was
on a DVD boot install disc) - or if on CD, run the original Apple
Hardware Test to see if it shows any defect? There may also
be some cryptic log entries in the system reflecting the action
you observed; and that may be helpful in diagnosis.
And in a few cases, a repetitive cleaning of the optical drive's
lens may help it recognize DVDs; they are different than CDs.
There are third party replacement optical drives that can be
used to correctly repair, update or upgrade the older iMac.
Good luck & happy computing!

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

Loud noise when burning CD and will not burn DVD

I bought an iMac a week ago and have been trying to burn DVDs - from finder, toast, popcorn and i have tried different brand DVDs and +R & -R all to no avail. i get a error message everytime.
I can burn CDs, but it makes a really loud whirring sound (i mean unhealthy loud) throughout the whole burn process and then for a few minutes afterwards.
Has anyone else experienced these problems? It doesn't sound normal.

It's probably a media problem. I had a 100 pack of Verbatim CD's that vibrated and made a loud noise in mine. Like it was out of balance. They worked fine in other burners.
If another brand does the same thing, then I'd be concerned.

Optiarc DVD AD-7170A drives will not burn DVD's

My 2007 MacPro has (2) Optiarc DVD AD-7170A drives, and neither will burn a DVD. They each have Firmware Revision: 1.N8
I was able to find 2007 feeds regarding this problem - that I did not see get solved. Has anyone found a solution?
Many thanks,
Eliza

Solution: No, not really... but you can easily replace the drives with )correct) new ones.
SuperDrive DVD/CD & Blu-Ray for Apple Mac Pro XEON Models- Read/Write Faster + More Burn options!
This is what Other World Computing is offering and I've never known them to be wrong. Buy them wherever you want, but buy that spec and you should be good.
hope this helps

DVD Studio Pro 2 will not burn DVDs

I have recently upgraded to Leopard. I can now build an entire project in DVD Studio Pro 2. However, when I try to build, format, or build & format a DVD the application will "quit unexpectedly."
I contacted Apple support and was told to uninstall the program and re-install it. I did that and the problem still exists.
All of my software has been updated.
I understand the software is "older" but if it were unsupported software, why can I build an entire project and only have trouble when it comes to transferring it to a DVD?
My DVD superdrive has been upgraded, and I have burned photo DVDs and CDs with the new burner without any issues.
Does anybody know what else I can do?

PaulaMac wrote:
David,
I didn't mean to offend you with my frustration with Apple. I understand the need to upgrade operating systems. However, I don't believe that upgrading operating systems should make software obsolute. When Windows changes their operating systems, the programs you have installed on your PC will continue to work.
Leopard is many interations passed the OS that DVD SP came out and you would have the same issues in Windows with what software runs or not and usually Mac software has a pretty good lifetime. DVD SP has not been sold as stand alone for quite awhile unfortunately. Though I do have some issues with Apple from time to time, this is one of those where I cannot fault them.
Try Tiger (I am running PS3 on 10.4.11 MacBook Pro with no issues), but make sure to deauthorize your Photosshop 3 before doing anything on the sytem. As to Leopard, I am not a big fan yet, so unless you absolutely need it, you are not missing much yet.

Will not burn DVD

Similar Messages

Maybe you are looking for