Will not charge while being use

I have just noticed that my iPhone 3G will not charge when I have it plugged in and using it. With the phone plugged into the wall ac and using the telephone the battery will discharge down to red. This takes about two hour. Everything else I have electronic will switch to AC and trickle charge while being used. I also tried a hard reset that someone posted on the web and this did work one time, but now it is back to the same routine. With out the ac adapter the phone will not last long. What is going on?

The iPhone includes protection for the battery when charging. If the battery's heat exceeds a designated temperature when charging (charging alone increases the temperature of the battery), and depending on usage during that time which also increases the iPhone's internal temperature, charging will stop until the temperature is reduced.
When you stop using your iPhone when connected to a power source, does it begin charging?

Similar Messages

  • New MacBook Pro Will Not Charge While in Use

    I'm not sure if this is an issue, however, I have been unable to find more information regarding this, so I thought I'd ask. While plugged in (MagSafe LED=Orange) the computer hovers around the same percentage of charge (i.e. +/-2%), even with very low to no use, and every once in a while says (Not Charging). However, when in sleep with the deck shut, it charges promptly as it should.
    I've occasionally seen it charge slightly while in use while using the plug without the extension portion, however I am unsure if this is related. I have tried resetting the SMC, restart, etc. So my question simply is, is this an issue, or is the computer specified not to charge while open?
    Thanks!

    As eww indicated, it may be a fault with the charger. The reason for my question was because you can use the 60 watt charger that comes with the 13" model on the 15" model (which comes with an 85 watt charger), but... it will only provide enough power to operate the 15" model while in use... it does not provide enough power to both operate the machine while charging it. It will only charge with the machine shut down. Your symptoms sounded very similar... but as you're using the correct charge, it may just be a bum charger. These types of things tend to fail early on if they're going to fail at all. With it only being a few weeks old, that would also seem to make it more likely to be a faulty charger. Apple tends to be very good with these things. If you have an Apple store nearby, set up a Genius appointment online. There's a good chance they'll just replace the charger for you. It's a good to bring it in though so they can check it out for you just in case the problem is with the charging circuitry in your Mac and not the charger.

  • Battery charges when asleep but will NOT charge while awake

    Hello -
    By battery will charge when off/asleep but will not charge while awake. It just slowly drains to nothing and dies even though adapter is plugged in. magsafe adapter light is green when open/on and orange when off/asleep and lights on battery indicate charging while in the latter state. still using stock battery that came with computer when I got it a few years ago, so it's not new by any means, but when fully charged lasts as long as it used to. I would think maybe charger is issue, but it DOES charge, just not while awake. not sure why computer wouldn't still work correctly while plugged in if in battery indicator it says power source is "power adapter," but its not. I have tried resetting PMU and calibrating battery. the combo of the two seemed to work when having issue a few months ago, but it just started doing it again. frustrating because once it dies I have to wait several hours until its fully charged again, so it cramps the workflow... any ideas? battery info from profiler below.
    Cheers,
    Ian
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB013-3556-2063
    Manufacturer: DP
    Device name: ASMB013
    Pack Lot Code: 0001
    PCB Lot Code: 0000
    Firmware Version: 0102
    Hardware Revision: 0300
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 81
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 4571
    Health Information:
    Cycle count: 827
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1134
    Voltage (mV): 10921
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 60
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Scott - Your answer ultimately led me to the answer, albeit months later, after much internal deliberation and some trial and error... thanks!
    Ruled out battery (as crazy as that sounds - it's had a bajillion cycles) as it didn't make sense that battery would charge but wouldn't work while awake. I have a friend whose battery is completely shot and his still works as long as magsafe is plugged in, and mine wouldn't even do that. tried another adapter and that worked. then tried mine in a different plug. so in the end, turns out I had a bum powerstrip... mag safe / battery recharge works properly when just plugged in somewhere different.
    So no need to buy a new charger or battery (yet!)
    thanks to all,
    Ian

  • I installed the new iOS 7.1.1 and now my iPad will not charge like it used to before the update ?

    What can be done to fix this ???

    Once I did the update it will not charge as quickly as it used to I mean like could be on the charger all day and not reach 100% and my friend has an iPhone 5 and she had the same problem the charger isn't broken and nothing is wrong with with place on the device for the charger she had to end up getting a new charger but I'm not buying a new charger when this was not my fault

  • My ipod touch will not charge when I use the FM transmitter.

    I have a FM ransmitter that will play music when I attach my 3rd generation ipod touch but it will not charge it.  But I receive an error message that my ipod doesn't support this device.  I use an adapter but it doesn't work.  I've used this adapter in the past with other FM transmitters and it would charge my ipod.  Thank you.

    I have the same problem, my ipod connects to various wifi networs supplying internet to other devices but I cannot use safari... pages connect/ download endlessly. However Map app works fine. Wifi signals strong.
    I have reset network setting but all this has done is to wipe all my passwords and networks, and I still cannot connect to the internet. Frustrating!

  • My iphone 4s will not charge while it is on?

    If I turn it completely off It will charge, however once on no matter what charger I use (Iphone, Ipad, car, 2 different docksone sony, one altec-lansing) it will not charge. Any ideas???

    Have you done a reset, hold down both Home and Sleep/Wake buttons and wait for Apple logo to appear.  Then wait for phone to reboot itself.
    Are you using a wall charger or a USB charger on your computer?

  • TS3274 Will not charge while plugged in

    Any suggestions as to why my iPad is not recharging? And how to fix?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • T400 will not charge while hibernating/sleeping

    I've had my T400 for about a month now, and I simply cannot get it to charge while hibernating or sleeping. If the system is powered off or on, it charges just fine. I am using Vista x64 SP2 and have not noticed any other power related issues. Does anyone have any thoughts as to what might be causing this behavior? Thanks in advance.

    I just want to preemptively state that the problem is not the battery thresholds. After all, at the same battery levels, the system charges just fine when completely shut down or powered on. Plus, right now the threshold is set to start charging below 75%, but even when my battery is under 10% it won't charge while the computer is sleeping/hibernating.

  • Will not charge when in use...

    My macbook is less than a year old, and has a brand new battery but will still not charge when it is in use. It only charges when it is closed or shut down. Since the battery is new I dont think that is the problem, and I have had my charger checked and that seems to be working properly. I have no idea what could be wrong unless there is something wrong with the computer itself. I have tried multiple outlets in different places. Please help! Thanks

    I figured it out.   I took the battery out and put it back in.  Ding Ding Ding  That worked, now it is charging.  How in the world did it work off the battery if it was not plugged in tight enough to charge??? Oh well, it works again.  Thanks

  • Macbook pro 15'' 2011 will not charge while playing games under win7 64

    During the game (under high load ex. crysis2), the charging LED changes from orange to green and the computer does not charge,
    even the battery drains slowly. If battery charge is 100%, in about 50 minutes after the start of the game, the battery charge drops to 94% and
    when I quit the game the charging LED changes from green to orange... What's the deal?  (Sorry for my english, i'm italian ).

    I've just bought a 17" MBP and I'm having the same issue, but in OSX and Linux just the same.  In one incident, my battery was running low so I plugged it in, but it still died about 10 minutes later because it continued to draw more power than the Magsafe plug could provide.  Needless to say, there was quite a bit of filesystem corruption from the sudden power loss.  That this is a common issue to 2011 MBPs does not magically make it "acceptable", especially when the fix consists of providing a more powerful charger.
    For a $2500 laptop this is absolutely ridiculous.  If the thing draws 100w under peak usage, make a damned charger that provides 120w.  In the worst case, it will keep the computer running without unduly stressing the battery.  In the best case, it will charge the battery much faster.

  • Lenovo ThinkPad X220 will not charge when in use

    I have a quesiton I have not found an answer to.
    Will the X220 charge the battery, when plugged into the 90W charger (42T4430), if the computer is in use?  I used my computer on battery for a few hours, drained the battery to 30%.  Then I went inside to plug it in and keep working.  After 4 hours of working, and it plugged in to the wall the battery still indicates 30%.
    The same thing happened when I was using my docking station.  I arrived at work yesterday with 76% battery.  After 8 hours on the docking station, I still indicated 76% battery life. 
    My previous (other major name brand) laptops all would charge even if I was working on the laptop.  Is the X220 different by design?  Do I have to shut down and plug in to recharge?
    Solved!
    Go to Solution.

    I figured it out.   I took the battery out and put it back in.  Ding Ding Ding  That worked, now it is charging.  How in the world did it work off the battery if it was not plugged in tight enough to charge??? Oh well, it works again.  Thanks

  • I need help. With my new iPad 2 my windows 8 computer won't recognize my iPad being plugged in. My battery also states not charging while being recognized by iTunes. How can I get my computer to recognize my iPad so I can place files on it?

    I  just want to put PDF files for my books on here. Please help me

    Here's some more info about the router settings:
    iOS: Recommended settings for Wi-Fi routers and access points
    You should be able to get into the setup of your router by typing the IP address into your browser.
    Depending on your router security setup, you might need the MAC address of your iPad, to allow access to your network, if the so called MAC filtering is active.
    You can also check the name of your home network if your click on the AirPort icon on your desktop of your MacBook.
    And here's a Wi-Fi assistant to get you going: http://www.apple.com/support/ipad/assistant/wifi/
    Message was edited by: Ingo2711

  • IPhone Not Charging While On A Call

    My iPhone 3G (currently running 3.0) refuses to properly charge while I am on a call. I used to be able to talk and charge at the same time, but lately, it shows the 'charging' symbol for a while and then just switches to 'connected'. The first time it did this, I realized too late and was left with a long and boring commute to work.
    I am quite sure it has nothing to do with the update to 3.0, because it started doing this a day or two before I made the upgrade.
    I usually connect to my laptop when charging, but I also tried connecting via the wall charger, which resulted in the same problem. I don't think it's a problem with the cord I use; I tried it with my Dad's too and it does the same thing.
    The moment I hang up, though, I am able to charge my phone with no interruptions. It continuously shows the charging symbol without randomly switching to just connected.
    I have a habit of making long, long phone calls and I like to have a fully charged phone when I leave for work or whatever. Does anyone know what the problem is/might/could be and/or how I could fix it?
    Thanks.
    Note: I was unsure under which topic this issue would be most appropriate and decided this was the best one. Please don't flame me if I'm wrong.

    I've noticed that while I'm streaming content on the 3G network my phone will not charge either.. Even while connected to my laptop it will not charge while streaming. I believe this may have to do with the 3G bandwidth.. Try making your calls while 3G is turned off.. I think it will charge simultaneously and I'm curious to know if this will make a difference.

  • Why is it that my ipad 3rd gen does not charge while connected to my laptop

    my ipad 3rd gen will not charge while connected to my laptop, just beside the battery meter it states not charging.

    Beacause the USB port of most computers don't supply sufficient current to properly charge it. It is best to charge it using the supplied power supply.

  • My ipod will not charge or connect to Itunes.

    So I have tried everything, plugging into 3 different chargers, into the wall and pc. Two different USB ports on the pc. And yet nothing. I have done all the hold down the top and home button for 10 seconds then also a minute and yet still nothing. It was was working fine charging and every thing and I unplugged it walked out of my room for about 5-10 mins go to plug it back up and nothing. I have been searching for over a hour looking for solution's. What is really crazy about it it that if I turn it off then plug into my pc the apple logo will pop up and it will come on and it seems to have charged some. But it still will not charge while on or be recognized by my pc or Itunes. I know it can't be any of the prongs on the charger port bent because it would not charge while off. Someone please help!! Thanks   

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    and
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Sales Order Creation using bapi BAPI_SALESORDER_CREATEFROMDAT2

    Please help me.. I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating sales order can you please tell me in which field the quantity(of items) is to be populated. i am populating in BAPISDITM-TARGET_QTY but i am not getting quantity field after sal

  • AUDIO THROUGH LCD TV

    pr oduct name hp notebook pc VR757UA#ABA MODEL G71-343US OPERATING SYSTEM WINDOWS 7 ERROR MSG -NONE ANY CHANGE MADE BEFORE THE ISSUE-NO WHEN I CONNECT THE PC WITH THE LCD TV  THROUGH HDMI CABLE  , I AM ABLE TO GET THE VIDEIO BUT THERE IS NO AUDIO FRO

  • Null Pointer Exception after adding Transient attribute in View Object

    Hello Experts I am using Jdev 11.1.2.3. I have added a transient attribute in view object and set default value to another view object attribute via view accessor of view link between view objects. the value of expression is ItemMasterRO.Description,

  • Change Wysiwyg Editor in Web Page Composer WPC

    Hi, is there any possibility to change the wysiwyg editor in the wpc? Comparing other web based wyswyg editors to the editor integrated in the wpc it is far from having any advantages...! - no possiblity to switch to html mode. - no possibility to as

  • ITunes not copying to iPod

    When trying to update my iPod, I get an error message which reads 'Attempting to copy to the disk "Anne's iPod" faiuled. The disk could not be read from or written to." Can anyone explain, in words of one syllable, what I am doing wrong? Thanks.