Will not display page that is used often...
Hi.
I use rapidshare.com and my home page is blingo.com. Yesterday all was well. I was downloading files, and searching with my home page. Today when I power on the computer my homepage does not load anymore. Neither will rapidshare.com. I have another computer in which i tried to access the pages and it works fine as well as my iPhone. I've tried to repair permissions for my computer and I reset Safari but no luck. Any ideas on what can be happening?
Thanks in advance
Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.
Similar Messages
-
Cross References Will Not Display Page Number
Got some documents created in InDesign CS3 (MAC). When bringing them into CS4 (Windows) and trying to create a paragraph cross-reference the page numbers will not display. All the other text in the cross reference ("paragraph", the word "page", etc.) displays correctly. Even the cross reference under the "hyperlinks" toolbar shows nothing (instead of the usual # indicating a page number).
However If I copy some of the same pages into a new document and create a cross reference in it the page number displays correctly. But since it's over 300 pages I really would hate to have to do that!
Any ideas?Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version. -
I recently updated to Mountain Lion on my late 2010 MacBook Air. Today, I attempted to use Safari and I can get no page to display. Safari itself loads, but no pages will load. I use Chrome as my default browser and only pull up Safari occasionally, so I can't say for sure that I have used Safari since the upgrade, however, I probably have.
Today, I was invited to a Go To Meeting online meeting. I opened the page in Chrome and it downloaded the GTM app. I clicked on that and it tried unsuccessfully to download required files from it's server via it's own app. I tried this several times without success and then thought to try the entire process using Safari. That is when I discovered that Safari would not display pages. It acts as if it has no connection to the internet. Safari loads and the progress bar moves a little across the top then it just stops. It never times out or complains; just nothing.
Given that the GTM app looks also like it cannot connect to the internet, I went looking at some of the suspects. My firewall is turned off. My network status comes up clean when I test it. ...and more oddly, Chrome seems to have no problems with any and all pages.
I searched for similar problems with solutions and one recommendation was to boot into safe mode to see if that made a difference. I did that and there was no difference. Since I don't use Safari routinely, it is stock, as delivered.
Any ideas for how to troubleshoot this?
Thanks,
BillSelect ▹ System Preferences ▹ Network ▹ Advanced ▹ Proxies. If any proxies are selected, deselect them, apply your changes, and try again. You must apply the changes before they take effect. You don’t need to change the other settings.
-
Firefox will not display characters that were added by the webmaster on user PC?
I employed a company to design a site for me which is great. Then I asked them to add a small button/image in the back end (admin area) that when clicked on will send an email. No image will display so I got them to change it to Text format, still it is not showing on my end. The design company are able to send me emails showing where it is but I cannot see it. It is worthwhile mentioning that it will not display in either IE8 or Opera, Is it a firewall problem ? Or a setting on Windows 7?
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTB5.6)Can you post a link?
Did you try to bypass or clear the cache?
Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press Ctrl + F5 or press Shift + Ctrl + R (Windows,Linux)
* Press Shift + Cmd + R (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]] -
For some reason after uploading my page to the website- I am
unable to see it. The page has CSS stylesheet linked to it and I am
able to get page source info ( my code) - if I unlink CSS and
re-upload- i see my page ( unformatted of course, without CSS
parameters it looks plane)- what could be the problem? Thank you> It seems like no one knows the answer?
> Any time I delete link between my CSS stylesheet and
.html page- I see site
> and it gets uploaded just fine. But if I attach CSS to
it- I get nothing, but
> plank page ( background color of my CSS)
is this the site (guessing from the email address buried in
prev. code)?
or a different page?
http://happytailstraining.net/about.html
in the CSS file, i see these things:
body {
background-repeat: no-repeat;
background-color: #0CA942;
text-align: center;
display: none;
---->display: none;<--------
#sidebar {
background-color: #669933;
display: none;
I think you also need to optimize the images, or not resize
them using html.
http://happytailstraining.net/images/scan0001.jpg
is 400 k, but shown much
smaller than it really is.
<img src="/images/scan0001.jpg" alt="1" width="162"
height="103" />
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Safari Beta 3 for Mac Will Not Display Pages
I am a Web designer who evaluates my work in various Web browsers, and I decided that I wanted to see how Safari 3 will deal with some of my designs. I installed the beta of Safari 3 on my PowerBook this morning. The install went fine, but when I try to get Safari to load any pages, it displays a blank screen. The progress bar shows the page loading but then...nothing.
I have downgraded back to Safari 2 and it is working fine on my machine.
Any ideas as to why Safari 3 won't render pages or if there is a preference I need to rebuild to make it work properly?
Thank you.Hi David,
I had the same problem, but after reading up a bit, it seems like the issue (in my case anyway) is caused by any Input Managers installed (home/library/input managers).
For me, it was SafariTidy, but there are other culprits as well... remove any items you have in there and see if that helps! -
Firefox will not load pages when I use my back button
It is just doing this on the one site
Does this happen when you are both logged in and out of the website? I have tried accessing the website myself and I am able to access the site and use the back button on this site without logging into the site. If this only happens when you log into the site most likely it has to do with the login session that causing this problem.
-
Adobe Reader Will Not Display Large PDFs
When using the Adobe Reader app on PlayBook it will not display some PDFs. It seems that it will not display PDFs that are too large.
Some files that might be too large do not display while smaller files do display in the app. The too large range could be in the 12 MB region where the good range could be 6 MB or less.
I tried to submit feedback to BlackBerry on this issue but it returned my email saying it could not process my request. I am hoping that they read it here.
Here is a link to a page with both readable and unreadable files:
http://www.bossus.com/backstage/product_manuals/?group=2
A readable PDF is the owner's manual for the RV-3. A unreadable PDF is the owner's manual for the RC-3.That looks like a perfectly good PDF, but since it's trying to open in Microsoft Word, that means your file association for .pdf files is incorrect. You should change it to point to Adobe Reader instead of Word.
If you are on Windows, see http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7 -
Page will not display properly with inline Frames
I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?
Without seeing your page, I'm guessing that your page contains server-side includes, iframes and scripts to other files on the server that populate page with content on the server's end. You can't see it in DW because you don't have all the files in your DW local site folder. You said this views fine in FP. Was your page created in FP with FP proprietary tools?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Flash will not display on cfm page
For some reason my coldfusion server will not display any
Flash (including Flash Forms) If I change the page to html it
displays fine, also there are no issues with my dev machine, both
machines are running cf8. Any ideas?
Thanks in advanced
Cavanthis is the typical answer that everybody asks check he CFIDE
folder, but guess what, the folder is accessable and all the script
files can be loaded by the browser but still ... no cfform flash
displayed.
need more support for this issue, i can use all the cfform
features accept when trying to enable the format=flash and this is
what isnt processing correctly,
the developement server works fine but production server
doesn't and the CFIDE directory has the right file permissions and
is assessable to the browser. -
Netscape 4.76 not will not display portal page
I understand from metalink document 136120.1 that no 4.7 Netscape browsers are supported.
I have a portal page that will not display for my 4.7x surfers.
Is this remedied by the latest patch? Will it be a problem in v2?
Is it clear that this basically keeps us from using portal for public sites?Hello,
maybe you could try to rename the user profile, so windows will generate a new profile, when this user logs on to his machine. afterwards you can copy the important data from the renames profile to the new profile. perhaps this eliminates the problem.
if you switch javascript off, you will also get just a small bar from the portal. maybe on this client something is installed, that switches javascipt off?
best regards,
Christian Schebsta -
was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page
Quit the messages app and reset your phone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
After the phone restarts go into Messages and delete the thread containing the problem message. -
Oem web page will not display after O/S dst patch
Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards -
I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working
You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"
-
Page loads but will not display
I have an IP address that allows me to view my cctv cameras.It works fine with Internet Explorer,but when i enter the same address in to my safari browser the page seems to load but will not display anything.
I assume its some thing do with my internet security settings but do not now where to find them to allow this site. Can any one help please.
ThanksTry temporarily turning off your firewall via SystemPreferences>Security>Firewall. If the site then works you can turn the firewall back on and specifically allow Safari.
Maybe you are looking for
-
Please help me figure out how to get my 3rd generation ipod to have the newest software in order to download apps. It will not let me.
-
Problems with iPhoto after exporting library to external hard disk
Hello all, I am using iPhoto 8 on an iBook G4. I recently attempted to back up my iPhoto library to an external hard disk. I did this by dragging the iPhoto library to the external hard disk. I did not delete the library on my own computer. Since I'v
-
ITunes free songs are not free
The weekly song says "free" but to download it one must enter a credit card number. This is not free. I must pay for the song by providing priveledged information that has nothing to do with the transaction. Why must I provide potential access to my
-
Hi All, We have a vendor overdue analysis report developed in BI. In this report custome want us to add one more column that is Business Area.From which table i can link this BA. I have tried with BSEG table but it is not the correct one. Can anyone
-
When sending email photo attachment in Windows version of PSE11, it won't let me write my own note in the email as it is supposed to. How do I fix this?