Will not exit when logout button/tab highlighted

When trying to exit webmail site amongst others, clicking on the logout tab/button does not get a response

Have no idea what to do or try

Similar Messages

Some website will not load when their new tab comes up, just a blank page that says done on the bottom

if i'm on a site and click a link to open a new tab, the tab will open but the page never loads. i just get a blank page, and instead of the page name on the new tab, it says "click (GIF Image, 1x1 pixal)" and the address bar will have this http://click.linksynergy.com/fs-bin/click?id=6o8JG0hWlQI&offerid=143696.10000259&subid=0&type=4&afsrc=1&u1=01_2270023365_101019092649_184443883_Z. this happens to me on more than one site. i can't figure it out...please help. if you click on the link, you'll see what i see when the new tab open. i hope someone can tell me how to fix this.

Many thanks, solved issue I have had for weeks

Additional tabs will not open when clicking the "+" tab at the top of the screen or by clicking "file + new tab"

I've been using Firefox for several years and just ran across a problem within the past two weeks. I usually have several tabs open at the same time while browsing the Internet. Suddenly, when I tried to open a new tab by clicking on the "+" tab at the top right of the screen, a new tab would not open. Then I tried clicking on "file + new tab" and a new tab still won't open. If I click on a link within an email, then a new tab will open, but I cannot choose to open a new tab. Please help! Thanks! :)

In addition to the above:
Your above posted system details show multiple Java Console extensions.
You can uninstall and remove Java Console extensions, you do not need them to run Java applets.
See:
* http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

Dvr will not pause when the button is pressed.

I have been a fios customer for a couple of months. However I find that there are quirks that are annoying me. When I press the Pause button the DVR does not pause immediately. I have to press it numerous times and even then it is partially successful. Is there a fix for this?
Solved!
Go to Solution.

There is nothing that they can do remotely to affect your remote. Do you have more than one box in the house? If yes, try the remote in another room. All Verizon remotes will work all Verizon STB's. (they are just programmed for specific tv's for the volume/power). If the remote works in another room, the problems no with the remote. If it doesnt work, then I would try new batteries (no telling how long those "phillips" batteries have been sitting).
If you eliminate the remote. Then the next thing to check is.. Do you have a Plasma screen in the room with the DVR? If yes, make sure that your STB is at least 2 feet from the screen. Otherwise the Plasma screen may interfear with remote functions.
As for the DVR not working. What is is not doing?
====================================================================================
Error exists between keyboard and chair.

HT4993 My music will not play when the button is pressed

I've pressed the play button on my phone and it doesn't change or play any music.

There is nothing that they can do remotely to affect your remote. Do you have more than one box in the house? If yes, try the remote in another room. All Verizon remotes will work all Verizon STB's. (they are just programmed for specific tv's for the volume/power). If the remote works in another room, the problems no with the remote. If it doesnt work, then I would try new batteries (no telling how long those "phillips" batteries have been sitting).
If you eliminate the remote. Then the next thing to check is.. Do you have a Plasma screen in the room with the DVR? If yes, make sure that your STB is at least 2 feet from the screen. Otherwise the Plasma screen may interfear with remote functions.
As for the DVR not working. What is is not doing?
====================================================================================
Error exists between keyboard and chair.

Ipod will not reset when pushing button(s)

When i push the volume down and power button for 8 seconds or longer, nothing happens except volume goes down. Is it frozen?

Hey blaheha,
Thanks for the question. You may find the following information helpful:
How to reset iPod
http://support.apple.com/kb/HT1320
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
Thanks,
Matt M.

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

Tab will not open when I click on url or short url in TweetDeck after v6.02 udpate?

After updating to v6.02, when I click on a link in TweetDeck for Windows (v0.38.1), the url or short url will not open in a new tab.

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

After installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded

after installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded. How do I fix this problem? Thank You, Mike Chidester

is it up to date
Speed Dial :: Add-ons for Firefox
"Works with:
Mobile 0.7 - 1.0.*
SeaMonkey 2.0 - 2.5a1
Firefox 2.0 - 8.0a1"
https://addons.mozilla.org/firefox/addon/speed-dial/#detail-relnotes

My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear

My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???

Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

I opened a PDFs file that was attached to an email message and now it will not close when I press "Done" as it usually does. Does anyone have a solution to suggest? Thanks.

I opened a pdf file that was attached to an email message I received and now it will not close when I press "Done" as files usually do. Does anyone have a solution to suggest please? Thanks.

Try double clicking your home button then force close the stuck PDF by swiping upward. Once you've done that just click the home button again to exit.

Ipod Video 30GB will not play when it is being charged...

My new ipod will not play when it is being charged..., it keeps saying "Do not disconnect". Is it normal. If so this ***** !!! Or is there a setting I have overlooked !?
Gosh, I am a techie and I am having so many problems with this crap & iTunes. Why the fcuk can it not just copy Directory structure (which has music files, photos, etc.) as is and not have to create freakin Playlist.
Finally I found EphPod, but that thing will not do vidoes and photos.
-cj
XP 2000 Intel

But the iPod says "Do not disconnect" with the charging symbol !
Have you Restored the iPod?
if I eject ipod manually from the cradle or by ejecting it using iTunes. But then it stops charging.
Your USB ports shut off when the iPod is Ejected.
Here’s how to fix that.
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.
Also, about the playlist, if you do not create them, how will you sort or find from 1000's of music files
You can use playlists but you don’t have to.
On the iPod they are already sorted by;
Artist
Albums
Songs
Genre
Composers
EPHPod automatically creates a Playlist using the Directory name. Why can't iTunes do the same.
It doesn’t need to. See above.
You can create playlists as you want to.

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

When I compose an E-mail my address book will not open when I click on TO or CC, but it does work on other computers and also if I use explorer.

My address book will not show when I click on the TO or CC button, a mozilla page does open but there is no content. My E-mail accounts work fine on other computers. It also works fine on this computer if I use Explorer instead.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.1 r53
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/
You can also try to disable the "My Web Search Plugin Stub for 32-bit Windows". 
See [[Troubleshooting plugins]]
http://www.safer-networking.com/removemywebsearch.php
http://www.pchell.com/support/mywebsearch.shtml - PC Hell: My Web Search Removal Instructions

Will not exit when logout button/tab highlighted

Similar Messages

Maybe you are looking for