Will Not Export To Quicktime Error -1

Keynote has worked exporting to Quicktime perfectly in the past, but now says i don't have enough memory to export to Quicktime with an error or -1.
Just had plain text with me doing voiceover for about 20 minutes.
Have done it before with no problems.
I tried going to Library and removing the preferences for Keynote thinking maybe something got corrupted, but no dice.
Any help would be appreciated!

Was able to export after rebooting.

Similar Messages

  • Keynote 08 will NOT export to Quicktime

    I think it is ever since I installed Leopard or Keynote 08 that my Keynote recordings will not export to Quicktime. During 2007 I made many Quicktime movies using Keynote all of which exported successfully.
    When I click on "Export" the function commences. The movie will then play in a Quicktime window with my voice over recording which I made in Keynote, but it will NOT save as a Quicktime movie that can be used elsewhere.
    Does anyone have a workable answer to this issue.
    Thanks

    The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
    What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
    I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
    If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

  • My movie will not export it says error compialing video

    I am done with my movie and i want to export but it will not let me it says, Error Compiling Movie. Unknown Error. Please Help i need to export it quickly.

    Error Compiling Movie... some past discussions and ideas
    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
    -http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
    -and nested sequences http://forums.adobe.com/thread/955172
    -and WMV files frame rate http://forums.adobe.com/message/4629210

  • Keynote 3.0.2  Will Not Export to Quicktime

    I have a put together a Keynote presentation that uses a Quicktime movie on one of the slides. The presentation plays fine within Keynote, but when I try to export the presentation to Quicktime, the export stops and tells me there's not enough memory or there's something wrong with the file. The message comes up when the export procedure reaches the slide that contains the Quicktime movie. Is it possible to export a Keynote presentation to a Quicktime Movie if the presentation has a movie in it? That's like a movie inside a movie. I can't get it to export to QTime.

    The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
    What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
    I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
    If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

  • IPOD will not update? quicktime error? READ

    For a long time i have been unable to put new songs onto my nano...on one of my computers when I plug my ipod in, it goes on as normal saying "Updating iPod. Do not disconnect." And i think, ok, its putting the new songs on..but when i go on my ipod it hasnt put any new songs on. I have tried reinstalling, updating ipod etc....HELP?
    On my other one it wont even start up itunes, it says "You have installed quicktime 7.0.2 or something . You need 7.0.3 or later, and when i try and install new quicktime it wont install at all...HELP!!!!!

    OK since we are talking about 2 PC's, We'll tackle hte one with Quicktime issues now, then tackle the ipod issue later using one of the PCs.
    Now on the PC with quicktime issues, goto control panel>add & remove and uninstall iTUnes AND quicktime. Then disable antivirus and any security programs and download the latest iTunes from apple.com and install it. If during the install you get any error messages post the error here.
    Once this is done we'll decide which PC you mainly use with the iPod and fix it

  • Final Cut Pro X will not export my project - error 1

    Hello everyone,
    So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
    Please help....Thanks

    Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

  • Quicktime will not export .wmv

    This started happening last week and i've tried to export .wmv's on a couple of other machines in the office. Quicktime will not export a complete .wmv of any quicktime movie. It will only export about 1/2 to 3/4 of it. Very very strange. Any ideas appreciated. I'm running version 7.4

    You need to buy the Pro version of flip4mac to export to wmv. More than likely you have the trial version of flip4mac. The trial version does let you export the whole video. http://www.flip4mac.com/

  • Export fails, quicktime error -50

    fcpx will not export my project to the media browser or other devices. it starts to then comes up with a quicktime error -50. i did export a quicktime movie using media export but it loses sound a few minutes in and the video keeps playing.

    code: Quicktime Error -50.
    error: -50 is the paramErr or error in the user parameter list. I.e., a parameter that you are sending to the procedure is missing or the parameter is unacceptable for one reason or another. E.g., a missing path element, filename with an unacceptable character, a destination target that is non-existant, a target prodecure expecting data that is not included in the file, etc.

  • Error R6034 during update. iTunes will not open due to error.

    Get Error R6034, Application attmempting to load C runtime library incorrectly.  iTunes will not install ammanulaly and now iTunes will not open due to error.

    Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

  • PXI - DAQmx tasks will not export to MAX 5.4

    I am in the process of upgrading a PXI 1050 with an 8176 to an MXI bridge. The latest headache is that the CVI program had several DAQmx (tasks) defined in MAX 3.1.1 which will not export to MAX 5.4. I have been posting these additional questions on my original thread MXI not visible in MAX. I have many tasks for installed PXI cards. I was trying to make simple tasks just defining these cards to change the errors I receive in CVI. I do not have the option to define a task for some of these cards like the 4070 DMM. I did not generate the original CVI code. I am not sure what is defined the DAQmx. Can someone provide some insight ? I have viewed the suggested videos and white paper links. They were instructive but of little help.

    Unfortunately; no updates without dollars. While we all work for the same company, we must contract work between departments. There was no defect with the software as delivered. Old age crept in to the hardware. Any upgraded hardware, it turns out,  requires updating of the software. The unit had operated reasonably well, until a couple years ago. An unfortunate selection of network security software caused massive headaches. The software chosen assumed a more advanced level of hardware. Mandatory installation on all network computers rendered these controller inoperable. Our local IT guys shaved down the install to minimal components but the controller lost all available ram to this software, NI-MAX requires 20 minutes to build it's database on reboot. The computer controllers struggle to function. They periodically get lost and require a reboot, causing 30 minutes or more to restart. This is driving a replacement. We decided that it would be more cost effective to move to a standard computer interface. With the MXI, we could have a much more friendly and versatile interface. The upgrade is with a different "color" of corporate money. There isn't enough funding to contract a software upgrade. It is feasible to complete the upgrade in house, once we can identify the players and their function. Second we need the necessary time and access to the equipment. I do not have the ability to expend too many extra hours at work. So it takes time. I have been able to piece together the following. In the development stage back in 2004 - 2005, the developers used both Traditional DAQ and DAQmx. They build tasks for the SCXI in CVI. They have toolboxes making calls to Traditional DAQ. Also at some point in time they must have used the option in 3.1.1 to Convert Traditional NI-DAQ(Legacy)Configuration to NI-DAQmx, which built all the extra DAQmx devices we see in the device tree in the MAX 3.1.1. So beyound the errors there appears to be a few red herrings, just for fun. So there is no tasks to convert from 3.1.1, everything is contained in the CVI code. I have to find a way to use the CVI debugger to lead me to the nested, buried code causing the errors, and simply correct them. Just for another layer of complexity, they are probably logic errors, not syntax errors, or updated code errors where the legacy code no longer functions with the updated drivers. Or, hey, it could be the beta version of NI-DAQ, because it is the only one working with Windows 7 (32).

  • I am trying to export a slide show from iPhoto with music from iTunes. it will not export the music file because i have not enabled iTunes plus. how do i do this?

    i am trying to export a slideshow from iphoto using a song from itunes. an error message comes up and say it will not export the song because itunes plus has not been enabled. how do i do that?

    It sounds like you tune is an .m4p file - p=protected and has DRM.
    Previously you could get the + version which was a .m4a file with no protection/DRM.
    The + option has been replaced with iTunes Match - $24.99 a year.
    A better option if you have a .m4p file would be to repurchase the .m4a version from the iTS unless you want to update your entire library with iTunes match.
    MJ

  • FCP not exporting full Quicktime

    Hi,
    I am trying to export a quicktime and for some reason FCP will not export the full version, it claims to be done, but only exports 6 out of the 7 minutes. My markers are set appropriately. I've never seen this before, any suggestions?

    What codec are you using for your export? What are your sequence settings? Try setting an in and an out for the last minute of your sequence and see if it will export. You might try copying the contents of your sequence to a new sequence to see if that makes a difference.

  • After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

    After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
    == This happened ==
    Every time Firefox opened
    == FF updated to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • HT201210 After downloading latest version of iTunes it will not open.  This error message is displayed;  The program can't star because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  Then a second error box

    After iTunes requested that I download latest version on PC it now will not open.  2 error messages appear.  first:  The program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  second:  iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126).  I have tried reinstalling a number of times and restarting computer but no luck.

    This happened to me today as well post installing the latest version of itunes.   I did a search on google for the error and came across a recommendation to :
    Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
    If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
    Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
    Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
    Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
    A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Maybe you are looking for