Will not install with Leopard

I just migrated from an older iMac G4 to a newer iMac 2GHz
Intel Core Duo. To my chagrin I then discovered that Director MX
2004 would not work on an Intel machine. So... I upgraded to
Director 11. After all the hassle of proving (once again) that I am
an academic, I received the confirmation and link so that I could
download and install the new version. Alas...! When I run the
installer, it says: "This software cannot be installed because the
file system of the OS volume is not supported." WHAT? Director 11
won't install on Mac OS 10.5.2 (Leopard), but it will on Win-doze
Vista???
HELP! I need Director! It is the prime piece of software that
I use to create programs for my classes!

SujaiS: I found the problem! My hard disk was formatted
"journaled (case-sensitive)". After searching through lots of
discussions and support files, I learned that apparently several
Adobe applications will not run with that format.
I therefore had to boot from my Leopard install disk, erase
and reformat the hard disk as only "journaled' (NOT
"case-sensitive"), reinstall Leopard, then restore the contents of
the hard drive from my Time Machine backup. I have since managed to
install Director 11 just fine. It has shown some odd bugs, however.
For example, a cast member with text (using an embedded font) now
shows an exclamation mark on a following line... but there IS no
exclamation mark to delete, let alone a following line! Weird! I
tried changing to another embedded font, and the program crashed.
Hmmmm.
At any rate, I would suggest that Adobe needs to specify for
Director 11, under Mac system requirements, that "case-sensitive"
formatted hard disks will NOT work. That is a simple warning to
include. Adobe is obviously aware of that incompatibility, since it
mentions it under forums and technical issues for other programs.
Shouldn't they list that system requirement from the get-go?
Thanks for your suggestions!

Similar Messages

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
The Printer Install Wizard can provide you additional information:
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

Driver for Mobile device will not install with installer

Uninstalled EVERYTHING to do with iTunes/Apple/updater. Reinstalled several times and the mobile device will not install.
I WANT MY MONEY BACK. I HAVE NO PHONE SERVICE.

Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!

Msi object will not install with non-admin user

I've created an MSI object for the Flash 9 plugin, which installs okay
on the workstation when I login with an admin user. It will not
install when logged in with a normal user account. I have set it up as
an unsecure user and given the workstation R and F rights to the msi
object, but I'm still getting a 1603 error code.
Any suggestions?

http://appdeploy.com/packages/detail.asp?id=798
You will see the ZENworks reference on this page.
I would bookmark this site :>
I almost always check it before deploying a new package to see if it is
listed. Helps me find issues before the issues find me :>
[email protected] wrote:
> I've created an MSI object for the Flash 9 plugin, which installs okay
> on the workstation when I login with an admin user. It will not
> install when logged in with a normal user account. I have set it up as
>
> an unsecure user and given the workstation R and F rights to the msi
> object, but I'm still getting a 1603 error code.
>
> Any suggestions?
>
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN

Photosmart C7250 will not install with Windows 7

I have bought a new computer wth Windows 7. My Photosmart C7250 will not install on this operating system wirelessly or by USB. The driver will install so that I can print only when I plug it in, but I cannot achieve full functionality. When I try to install it over the wireless network,, it gives me a fatal error (code 14116417). The printer does connect to the wireless network, though. I have uninstalled and reinstalled numerous times, and have run out of options. Any ideas, besides buying new??? I really like this printer!!! And thank you in advance!

I is likely not your printer. Here are a couple of things to check:
1. Disable your security system's firewall.
2. Reboot your router and try again.
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

ATI Radeon 9600 Mac & PC Edition will not work with leopard

When I installed a new ATI Radeon 9600 Mac & PC Edition, 256MB; my Dual 2 GHz G5 (June 2004) will not allow me to drive my Apple Cinema Display while running under leopard, (neither 10.5.1 or 10.5.2 with Leopard Graphics Update).
The mac starts up as usual and gets to the white screen with Apple logo -then the progress ring eventually stalls. The mouse pointer becomes visible and can be moved freely around this screen.
I can connect from other macs on the network and navigate files, but screen sharing results in an all black window.
The Radeon 9600 works fine if I start up the mac with the Tiger installation disk.
I have tried every suggestion that I could find on these boards and elsewhere: zapped the pram, reset the SMU, installed older ATI Drivers, etc...
Of course the G5 is far out of warranty. I've been running Leopard since the day it shipped - so that's out of warranty now, and there is little help to be found on the ATI/AMD website. I'm afraid I'll have to return the card before Apple releases another graphics update.
The stock graphics card that came with this mac is the nVIDIA 64MB GeForce FX 5200 - but it's having trouble keeping up with Leopard's demands - my isight barely works, most special effects in iChat and PhotoBooth are unusable, and of course I'm not given the option to use a transparent menu bar,
I am really good at swapping video cards in the G5 now - but I'm so frustrated.
Does anyone else have any suggestions?
thanks

Hello I have Grafic card ATI Radeon 9600 Pro-256MB install. after Updates. I was after *delete all ATI files besides*
ATINDRV.kext
ATITVOut.kext
ATIRadeon.kext
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeonDVDDriver.bundle
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRNDRV.kext
from System/Library/Extensions run ther 30'' Cinema, mit 2560x1600 but without Quartz Extreme . *I'm very angry of APPLE* 3 week without help, 5 Telefon support with Apple, with ATI without solution.
I know that ATIRadeon9700.kext drive Quartz Extreme. But I don't know what can I do too.
My solution for this moment is only this one. If I know my solution from Apple, ATI or another one look sometimes on
http://discussions.apple.com/thread.jspa?messageID=6645245&#6645245
Message was edited by: knoche
Message was edited by: knoche

My airport express seems to no longer be supported by Apple. Was working fine, just blinking amber. So tried to update and reset, but update will not install with Lion? Im disgusted.

Airport express was blinking yellow. Tried to update, but my computer said update is not supported (yellow exclamation points). I have a mac pro with Lion and latest updates. So I reset express, yes that was a mistake because it was at least functioning on my stereo, now it does not function at all and shows on my wifi as "airport express", used to be labled "stereo". So it asks for an update, I download the update, but computer will not allow update to be installed. I will buy a newer one if I have to because I enjoy it's function, but I will be extremely disgusted with Apple to have to do so.

If you are using Lion...as you indicate...is it possible that you mistakenly downloaded the incorrect version of AirPort Utility?
Try the following version for Lion:
AirPort Utility 5.6 for Mac OS X Lion

ZMM Profile on IOS 7.1 will not install with ZMM 3.0

Anybody experiencing the same issue as I have? When using ZMM server version 3.0, iPhone devices with IOS 7.1 will not receive profiles. The only thing they do receive is one MDM profile. However, I expect at least 5 ZMM profiles on the iPhone devices. This problem seems IOS version related. When enrolling a device with IOS 8.x, profiles are installed just fine.

I am not seeing exactly the same thing as what you are describing. I have had issues with deploying Apps, including Managed Apps. I do notice that several of the teachers that I support recently updated to iOS 8 which caused some working profiles to fail. Once I removed and reloaded the configuration I noticed that the profiles only had the single MDM listed. Everything acted like it was working so I haven't looked at it further. I don't personally have iOS 7 devices so can't check tonight but will look to see if any of my other iPads I support show only a single profile setup. My iOS 8 iPhone (4s) only has the single profile with listed items under that profile so I am guessing that is how Apple is now handling things.
Richard

Recommended patch 120445-01 will not install with Sol. 9 (09/2005)

Patch 120445-01 will not apply to a Solaris 9 (09/2005) setup. The hardware is an Ultra-80. Although it is recommended, it fails with the "patchadd" message:
Checking installed patches...
One or more patch packages included in 120445-01 are not installed on this system.
The host was installed from scratch and the "smpatch" was run until it had no more patches to apply except this one.
For us, this patch is only an annoyance. When I cursorily read the description, I doubt that these features exists on this hardware.

I had to install the packages:
TSBWvplr.u
TSBWvplu.u
from the DVD media. I could not find these packages from the CD media that I used. I had to use another machine to extract the packages.
I saw another post where it mentioned that patch 120445-01 would not apply. I suspect that the package install of it already has this patch.

Photoshop will not install with CS5 macbook OS X 10.5.8

Received the following erros when trying to install CS5- cannot install Photoshop. I've seen several errors like this posted with no succesful tips to solve. Have tried several of them, enabled root user, uninstalled started over, etc.
Can anyone help?
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 9 warning(s)
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {50491591-A44F-429E-B7C8-87E03FECFD78} Adobe Flash Catalyst CS5.5 1.5.0.0 -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/CS5_5 Mstr Coll 2/Adobe CS5_5 Master Collection/payloads/AdobeFlashCatalyst-mul/AdobeFlashCatalyst-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: {08EF22BC-43B2-4B4E-BA12-52B18F418F38} Adobe Photoshop CS5.1 Core 12.1.0.0 -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/CS5_5 Mstr Coll 2/Adobe CS5_5 Master Collection/payloads/AdobePhotoshop12-Core/AdobePhotoshop12-Core.dmg. Please verify that the disk image is not corrupt.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {DEA79551-23E3-430A-9B15-B544479B7DB2} Flash Player 10.2.153.1 -----------
WARNING: DF009: Higher version plugin already exists at: /Library/Internet Plug-Ins/Flash Player.plugin(Seq 48)
WARNING: DF010: Not installing plugin to: /Library/Internet Plug-Ins/Flash Player.plugin(Seq 48)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Flash Catalyst CS5.5: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 English Language Pack_AdobePhotoshop12-en_US: Install failed

Please review your installation log in it's entirety. You can find details on how to locate and interpret the log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Installing Officejet 4315v on Windows Vista Home Premium will not install with/without disc.

I have Windows Vista Home Premium S.P.1, having difficulty installing my Officejet 4315v. My HP computer died and I replaced with this one. I wasn't have problems until just recently. I tried running the disc I have but it just says 98,2000,XP, CD version 6.0a. It would not install. I went to web site and followed instructions. It downloaded but installing keeps saying to "RE-TRY"! I need this All in one very much, it has been so good and easy to use. HELP!!

Hi
Try to install the following driver
AIO_CDB_Full_Non-Network_enu_NB.exe
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with Labview 7.0 or higher; or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0 and vision 8.2.1 packs with Labview 8.0 with no success.

Hello mcg,
I am not familiar with NI-IMAQ for USB 1.1.1. The newest version I know of that we have is 1.0 at the following link:
NI-IMAQ for USB Cameras 1.0
You are correct that you need LabVIEW 8.0 and Vision 8.0 installed. After this you should be able to install this very simply. If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
Please let us know if you have any more trouble on this. Please post a screenshot of the error as well.
Regards,
Luke H

Solution Center program will not install with D110 full feature download

I had a bug where my system kept searching for SolutionCenter.msi in a loop. I was forced to uninstall my printer software completely to fix it. Upon reinstall, the Solution Center is totally missing. I have lost the CD and downloaded the software from this link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4023...
I read in several message here that the full version of the software included the Solution Center, but it did not install for me.
This question was solved.
View Solution.

Hi,
From the Start menu type SolutionCenter.MSI into the searchbar, the results should appear within the search results.
Note: if there are several results locate the one which was modified latest.
Right click the file and select Install, you should see a dialog apper...
Once the dialog completes reboot your PC and check if the HP Solution Center was added to your PC.
If there are no results type %temp% into te search bar abd open the Temp folder.
Open the latest HP installation folder, its name begins with 7z (ex. 7zS1234)
Open the Setup folder.
Open the SolutionCenter folder.
Right click on SolutionCenter.msi (if the file type is hidden it tye appepars as Windows Installer File) and select Install.
Reboot your PC and check again.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photoshop and iPhoto will not open with Leopard

I can not open Photoshop or iPhoto with Leopard. I have Photoshop 7, this is a huge problem, need Photoshop ASAP, can anyone help?

You've misposted in the iPhone forum

Will not install with Leopard

Similar Messages

Maybe you are looking for