Will not load sites-only code

In about the last month, possibly coinciding with the 10.02 update, Firefox will frequently refuse to completely load websites. This does not leave an error message but a page of code is loaded instead. I have attempted EVERY method for fixing similar bugs but nothing fixes the problem.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Similar Messages

I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

Version 3.6.6 and Internet explorer will not load sites, so I reloaded the older 3.6.3 of firefox and websites load fine. Internet Explorer still will not load. The error message corresponding with 3.6.6 was that there were problems with the proxy serve

Upgraded to 3.6.6 and no sites loaded, error in proxy server. Internet explorer will not load either. Reloaded firefox 3.6.3 and sites load fine, but internet explorer still will not load. I was only able to connect to yahoo messenger when websites were not loading.
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6

I have a problem with Firefox loading. It will not load and it says Firefox is using a proxy that refuses connection. Check with your network administrator. How do I get Firefox to work. I've uninstalled it and reinstalled it twice. Any help would be great thanks.

IMac will not load internnet sites despite it having all green lights on the Network Diagnostics screen. In other words there is a valid internet signal going into the iMac, but the machine will not load sites. Help? iOS 10.9.5

iMac will not load internet sites, despite having all green lights (strong WiFi signal etc) on the Network Diagnostics screen. in other words there is a strong
internet wifi signal going into the iMac but the machine does not connect to the internet. I OS 10.9.5. Other devices work fine with the same internet signal.

iOS 10.9.5 does not exist.
iOS refers to the operating system on iPhones, iPads, and iPod Touch.
10.9.5 was never a version of a Classic operating system.
10.9.5 was a version of Mac OS X, and is 13 years newer than Classic.
Here are reasons for WiFi signal to fail even when they appear to be strong:
Most common Wifi issues
Your Mac may be too close to your WiFi router, in which case, it might be better to connect to it via an ethernet cable if it can't be moved.

Will not load sites linked from another website--have cleared cache, cookies, history, restarted, checked in Safe Mode--still does not work.

Some sites load fine. But some sites will not load when linked from another web site, or, occasionally, even from my bookmarks. I went through troubleshooting routine--cleared cache and cookies, history, checked in Safe Mode for extensions, etc., but still will not work in Safe Mode. No other problems with computer or browser.

What happens when you click the link that does not open up the new page? Is it a blank page? Does this also happen if you Shift Click the link?
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

I'm connected but computer will not load sites

I have a WRT54G ver. 6 and I can't figure out what's wrong with the connection. The household has two laptops and one desktop(wired) connected to the router. My computers will say they're connected but will not load web pages. There's no data transfer. Sometimes repairing the connection will fix the problem but most the time it does not. Usually I have to disconnect the power to the router then reconnect it. That fixes it, but lately I'm having to do this several times in a day, which gets annoying. Occasionally I'll see the a box popup that says I'm connected to the internet even though I've been connected for awhile. Even my desktop that's wired to the router will stop loading pages. Does anyone know what would do that? Is my router going bad? Is there a way to run a router through some kind of self diagnostic?

I have a Dell Inspiron 8600 w/ linksys Wireless B card and a Dell Inspiron e1505 w/ Intel Wireless Pro card.
When only one computer has access to the router it seems to work fine, so I'm convinced it has something to do with how the router distributes the internet connection to several computers it has trouble.

Adobe flash will not load - gives only a black screen

For all the (3) users on this computer.   For most browsers (Safari, Chrome, Firefox) The browser window goes 100% BLACK when a flash program link is opened and most of the time the cursor / Pointer freezes (occasionally disappears and all keyboard actions are blocked. Have to force quit or kill the box with the power key (which always bothers me.) No Adobe links work directly via the link in mail or in browser. Symptom in Mail is either the original window goes BLACK or a separate window opens in Black.
Current OS X 10.9.3 (13D65), Memory 4GB on 2.4 GHz Intel core i7 in MacBook Pro 15" Late 2011.
Relevant?? Items:
1.     The Adobe company checking device says Flash is not loaded. I have had flash 9, 10, 11, 12, & 13 working before the latest of   OS X upgrades were made.
2.     An aside, I recently (4 months ago) used a MacKeeper app. Today (not used except for information gathering) the "System Scan says my ProtectMac anti-virus is active and no security problems noted. Also noted was "Serious" issue relating to one of 128 issues (474.3 MB of 'junk' files-36.9 MB in 'Logs", 437.4 MB in Caches.) "Performance" listed as 'Fast.' No action is taken and System Scan app closed.
3.     I seem to have lost my copy of Flash 13 in the Applications folder and the install file tries to load "AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg"
This makes sense as to item 1. above.
4.      Another user loaded adobe flash 11 from a download file called, "AdobeFlashPlayerInstaller_11au_ltrosxd_aaa_aih.dmg." I do not understand the meaning of the part of the file name that reads "_11au_" as it seem to differ from other downloads for "_11eu_". Additionally the copy retained is filed in history and had only the user permissions of one user. Also that copy _11au_ has no mention of Browser Type in the name description of the .dmg file; but the "_11eu_" does mention Safari browser.   Since it was from July 8, 2013 I assume it doesn't matter and it should have been superseded by Flash 12 OSX. Mentioned here only for interest. Also, It may have been saved on this computer in case of rebuild for another user on the home network running 13" MacBook Pro 10.6 Leopard.
5. Attempts to reload Flash 13 from 'AdobeFlashPlayerInstaller_13au_ltrosxd_aaa_aih.dmg' as the "Adobe Flash Player Installer" connects to the latest version not yet installed and keeps downloading the Flash 14, which fails and locks up the browser.
6.     The download from get,Adobe.com starts out O.K. After the installer file.dmg completes well, Step 2. is to open it, that, too, works well with an open window of a mounted device on the desktop. The next step is to double-click the icon. That only works so far. A window opens and it has a progress thermometer but it never downloads any product and the link is declared "unavailable" immediately. Refuses to load and will not always give the pointer back or let the browser continue.
7.     While creating this 'Summary' something changed. Using Spotlight I found a different version of Flash Installer on my Mac. I clicked it to go to the Black screen after installer download competes and got a totally different response. I was set to take snapshots of the windows as they progressed. The ".dmg" Icon on the desktop changed from default plain white disk to the red "Flash Player" I had not seen for last 40 days.
Pic 1.     Pic 2.
Pic 1. is the desktop device icon.
Pic 2. is the Installer.
Pic 3. is the Acceptance popup. ~~Note: This popup shows a backwards rev dated March 4, 2012! today is 10 July, 2014.
Flash Player 11.6 is installing after acceptance of License.
Everything went normally and loaded but I cannot test it as all browsers were closed.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Videos Will Not Load - 'HTTPS:' only valid workaround on certain sites

Windows 7, 32-bit
Firefox 12, 32-bit
Flash Player Version 11.2.202.235
I'm unable to load videos from many sites right now, and I've done everything else I can possibly think to do except ask for help here. The problem started spontaneously. Nothing seems to have been added to cause this, as it literally happened overnight (possibly during the day, as I have the recollection of running into error messages suddenly, and them never stopping), and even if it had, a system restore should have resolved the issue. It didn't. I've tried all of the following, none of which helped:
-System Restored to Well Before the problem occured.
-Uninstalled Firefox.
-Upgraded to latest version of Firefox.
-All add-ons disabled.
-Uninstalled Flash Player
-Upgraded to most recent version of Flash Player.
-Drivers are up to date.
-Ran through all of Adobe's Troubleshooting options.
There shouldn't be any issue with an ad-blocker, as I don't believe I have one, and even if I did, for it to work perfectly one minute, then stop the next is absurd. Nothing changed with my PC-Cillin virus scanner. I even disabled internet protection completely, yet it changed nothing.
PROBLEM MANIFESTATIONS:
Youtube:
HTTPS Server: Plays all videos & components just fine.
Regular Server:
If an ad preceedes it, the ad never loads, and the skip button can never be pressed.
Can play videos without an ad preceeding it, but cannot load Closed Captions or Annotations (which has a symbol next to the button).
Despite never loading the ad, it lists the file's name, and clicking on it will take me to the ad's own youtube link, which plays fine. That also tells me Youtube's ads are on-site, so where's the breakdown occuring in getting an ad to load?
ORIGINALLY, when this manifested weeks back, Youtube spat out an "Error Loading Video. Please try again later." message. That stopped after about 2 weeks, now it gets to the point where it realizes it needs to load an Ad, but won't.
IGN.com:
HTTPS Server: Plays videos fine.
Regular Server: Perpetual loading ring.
*: Some other sites never load the video or stream at all, even on a Secure Server. The video container is completely empty (Whereas on Youtube it realizes it needs to load an ad, but doesn't).
I'd like to fix this instead of having to switch browsers, but what am I to do? Nobody's been able to offer a solution, and everything I've tried has failed. I see no legitimate cause for this either. What Flash Player problem could survive a system restore and reinstallation of my browser and flash player?
Your time and assistance mean a lot to me. Thank you for any help you can give me with this frustrating issue,
- Jini

Since Chrome is working, then there's something going wrong with your IE and Firefox installs of Flash Player. Could you tell me what files you have in the C:\Windows\System32\Macromed\Flash folder?
You might want to give a clean install a shot:
How do I do a clean install of Flash Player?
Then for IE issues, follow it up with the steps in:
Enabling Flash Player in Internet Explorer 9

Safari will not load sites hosted on .Mac

Ever since the most recent update, I have not been able to view any of my four websites hosted on .Mac. It doesn't hang with the spinning ball or crash, it just goes to a blank screen...no error warnings or anything. It does this on all four of our household Macs (they all have the latest update). I can pull up these sites perfectly on any other browser.
Anybody else having this problem? Is there a way to revert to the older version of Safari or a fix?
I've tried emptying the cache and sometimes that resolves it, but not for long...then it's right back to the same old same old and sometimes it doesn't help at all.
Thanks for any and all input on this matter!

Are you accessing the sites directly or through URLs that are being forwarded to your .mac sites? If it is the latter, it is probably the same problem being discussed in:
http://discussions.apple.com/thread.jspa?threadID=244605&tstart=0
Mac OS X (10.4.3)

My site will not load in design view?

I can not figure this out for the life of me but I am hoping someone here can give me a simple solution. I have spent endless hours trying to figure out why my site will not load when attempting to open any of the template or html files of my local site in design view. They open fine in Code view but when I click on design view, I get an hour glass that only goes away if I close dreamweaver using ctrl + alt + delete and use the task manager to close the process. My web address is www.thebluedot.net if that helps...
Any web pages outside of my actual site open fine so I am not sure what is causing the issue with my site itself? I have opened the template and have deleted all the code from it and attempted to view the file in design view and still get the same problem. Is there perhaps something simple that I am overlooking? My site worked fine in design view several days ago and I can not think of any changes that I made that may be causing the problem. I have uninstalled and reinstalled the entire adobe suite and I am still having the issue.
I am running on Windows Vista and have 4 gigs of ram and a 2.6 Core Duo processor if that helps.
Please help me out here. Really would appreciate any help you can provide!

Really appreciate your response.
I am using Dreamweaver CS4 and I tried deleting the config folder. Still no luck...
Eerything opens fine except for files fom my site. I have deleted the site from Manage Sites and recreated it but still am having the same problem.
When I delete the Configuration folder do I have to reset it up some how? Why is dreamweaver rendering all my other files outside of my site folder successfully in desgn view and not giving any other files an issue? I really hope I can get this resolved soon.
Again, appreciate your help.

My safari will not load in normal mode. I can load in safe mode only.

My safari will not load in normal mode. i can only load in safe mode.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 42;D23 14 2 48 43;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 40;D23 20 42 32 41;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

.gif files will not load into site

I posted a question earlier about pages not loading and the question was answered, but now my .gif files will not load. Below is the log:
Started: 4/9/2012 2:41 PM
imageshomepage\Announce35.gif - error occurred - An FTP error occurred - cannot put Announce35.gif. Access denied. The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
imageshomepage\Announce35.gif
Finished: 4/9/2012 2:41 PM
I have them loading into the images folder that is in the htdocs folder.
I stated in my previous question that I am self taught via the adobe DW tutorial. I had a catastrophic computer crash and had to reload everything. I apparently did not tell DW which file to load into before and now that is fixed. Any help would be greatly appreciated.
Thanks

I was never a big fan of using DW to FTP. There are several FTP programs that you might find work better than DW. For example Filezilla, free and works pretty darn well.
http://filezilla-project.org/
For me, being able to graphically see my local site on one half my screen and the site as it sits on the server on the other half of the screen really helps me quickly spot problems if I upload something and it doesn't display.
Anyway... DW is not the only option for loading files to your server.
Best wishes,
Adninjastrator

I have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

i have a mac book pro with os x 10.5.8.......sometimes will not load google or yahoo, or any other search engine, but will load regular sites.....why is this?

Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

Web site will not load properly -- gettting an error msg

getting the following error wile logging into a web site :
URL: https://xxxxx.xxxx.xxx .....
Line 3609
Message: self.mainapp is undefined
Firefox is the only browser which does not load this properly.
An suggestions ? I cleared cache and cookies already

gapple3 wrote:
2 days ago a favorite web site that I visit daily will not load now???? I do not get any error page. It just keeps trying and trying but will not load. I have tried several things, checking pop up blocker, cleared cache, cookies, temp. internet files, etc. Any ideas????
Check the route with the use of the tracert command at the command line. tracert server or site name. This will show you where the connection stops. It could be lost on someones router, or the site could be down. Just an idea to get you in the right direction.

Pictures will not load on one certain web site

The pictures on any page from <www.gizmag.com> will not load. It is the only site I have ever had a problem with.

Do you see the images in Tools > Page Info > Media (http://images.gizmag.com) ?
Make sure that you do not block third-party images.
Verify that the pref permissions.default.image is set to true on the about:config page. 
You can open about: pages via the location bar like you open a website.
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Will not load sites-only code

Similar Messages

Maybe you are looking for