Will not Print to network printer

I have a A665-S6086 laptop on a small work network.  Yesterday, magically, it stopped printing to both network printers.  It recognizes the printers, says they are online, but will not print.  No error messages given.  Tried printing from Word, .pdf, and internet.
Laptop uses Windows 7.  Computer that the printers are attached to has Windows 7 and it prints fine.
I have tried reinstalling drivers, deleting and reinstalling printers, etc.  If I connect a printer directly to laptop it prints.
Any suggestions?

Hi All printers are different. I suggest you contact the printer manufacture. Do you have the installation disc that came with the printer?? Try installing the printer on all computers that do not work?? Also unplug the printer for 20 seconds. Some times I have to unplug my HP to get it to work wireless. It's kind a like rebooting your PC
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Similar Messages

  • My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

    my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
    It will only print when connected by usb cable.

    Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • OfficeJet 4500 will not print two sided over network

    I'm running on Windows 7 with an OfficeJet 4500 G510n-z over WiFi.  Printer works great except that it will not print two sided.  We've used a non-WiFi 4500 to print two sided before.  With the new printer the first pages print and the pop-up shows on the laptop (prompt to flip paper over) but nothing happens.  The second pages never print.
    I've run all of the HP print and network diagnostics.  Everything appears to be OK.

    The solution below was found on the sticky post at the top of this board "Fixes and Workarounds from HP"
    I think the patch below only applies if you have the original printer software installed, I assume this issue was fixed in later versions of the printer software, Read the patch information carefully.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-69847-2&lc=en&dlc=en&cc=us&...
    This Print Driver Update contains improvements for issues related to the following applications and/or print functionality:
         Microsoft Office 2007
         Duplex printing via network
         Printing from Intuit applications
         Print margin accuracy
         Thai language font

  • Desktop PC (XP) on home network will not print from internet, laptop networked to desktop will print?

    my home desktop is connected to router and wireless networked to home laptop. the desktop will not print from the internet, will print local word docs, etc.. the home laptop is connected to that network and does print from internet. both are using Firefox.
    If i use Internet Explorer the desktop will print from the internet.

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Office jet 4620 on network, will not print

    I have an Office Jet 4620 on my wireless network at home.
    It has worked well until I installed a new router. The network sees the printer, I have entered my network password into the printer software.
    When I try to print the printer makes a little noise then locks up. The only way to get the printer to turn off is to pull the power cord.
    Any ideas?

    Hello kalister1,
    Welcome to the HP Forums!
    I understand your Officejet 4620 will not print. I will do my best to assist you! I am going to suggestion two options for you to try:
    Please follow this entire HP document on Printer Does Not Maintain Wireless Connection. Also, I would recommend following this HP document on Sleep Mode Issues. Your printer could be going into a sleep mode, this is why you're experiencing this kind of issue.
    Looking forward to hearing from you. Have a great night.
    I worked on behalf of HP.

  • Photosmart C7280 will not print from one computer on wireless network

    C7280 will not print from desktop computer via a home wireless network. It has worked in the past, but ceased recently.
    It will print from a laptop on the same network.
    I have tried to comply with the procedures on the HP Support and Drivers site, such as the HPHNDU.exe routine and others, but have had no success.
    I would appreciate some help. My previous post in May has not had any replies.
    This question was solved.
    View Solution.

    Look to the left and a bit above Cancel and Post.  You are a member and not a visitor, right?
    You may not have enough posts to have the privilege of attachments, I am not sure.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart 6510 series network printer will not print black after changing cartrage

    HP Photosmart 6510 series network printer will not print anything that is black or has black in the picture after changing cartridge, all other colors are working properly after changing. Does not look like any damage to the cartridge or the insert where you plug in the ink. The well where the ink pad and the cartridge meet is damp with black ink. So not sure what is going on

    Hello dinger57 and welcome to the HP forums!
    I understand since changing the black cartridge the black ink has not been printing. I'm sorry to hear this, but I will definitely do my best to lend a hand
    I will suggest that you start with following through this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document. If the issue persists after that can you please let me know what country you're in and whether the printer is in or out of warranty? Thanks! Please feel free to private message me the country information.
    Hope to hear from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP Laserjet 4100 on network will not print

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?

    I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
    When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
    It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
    More to follow tomorrow.
    Anyone have any ideas?

  • HP will not print to my printer on my network

    I was using Motoprint until i upgraded my droid 4 phone. i downloaded HP eprint. It see my printer but will not print to it. the printer is a officejet 6310 all-in-one. It is connected to my wirerless router and has its own IP address. the app see it but will not let me print to it. How can I make this work?

    Hi Jhauser,
    I understand that you're trying to print from your mobile device to your printer.  The printer listed is not supported by ePrint.  The app that you've listed above is a workaround that one could try.  Try the steps below.  Let me know how it goes.
    1.  Unplug printer and router.
    2.  Wait 2 minutes and plug router up.
    3.  Plug printer up 1 minute after router.
    4.  Power cycle mobile device.
    5.  Try again to print.

  • IPAD2 with HP APP and connected to local network will not print?

    IPAD2@ and Netgear and Photosmart plus B210a.
    Will not print e-mail on Safari?

    Hello HarryE,
    What model of Netgear do you have? Have you ever been able to print from your IPad 2? You can try to unplug the router, then the printer and then turn off your ipad 2, then restart the router and when all the lights are back on, turn on the printer, then turn your ipad 2 back on, and then try printing again. Reply back if you still have issues!!
    http://support.apple.com/kb/ht4356
    I am a HP employee.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

    I've followed all suggestions in troubleshooting both from manual and on line.  Shut off firewall, unplugged, plugged waited.  Nothing changes.  All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located.  Help!!

    Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • My I pad will not print, but other I pad prints fine on same network

    MY I pad will not print, but other I pad works fine on same network

    Check the printer queue on the iPad by opening the multitasking bar.  If the Airprint icon is there, open it to see if a job is pending.

  • Networked Windows 7 will not print

    Parent computer runs XP.  Printer says it support XP and Vista.  Laptop is 7.  Laptop Recognizes printer but will not print. Do I have to buy a new printer?
    This question was solved.
    View Solution.

    Please read this post then provide some details.  What printer model? 
    Try the following: on the WIndows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the proper printer from the list..
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

    Products:
    HP Officejet Pro 8600
    Macbook Pro (Mac OS X, Version 10.7.5)
    Macbook Air (OS X, Version 10.8.2)
    Question:
    Why did my Macs initially print fine, but now will not print at all?
    Full Story:
    I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
    The HP Officejet 8600 was added to my network about 2 months ago.  
    I added a Macbook Pro and a Macbook Air about 3 weeks ago.  Both Macs printed just fine for about a week.  Then suddenly they stopped.  I spent about 2 hours on the phone with HP Service, and they finally said it must be my router.  So I called Netgear.  Netgear was useless!  They wanted me to agree to charges for services before they would even discuss the issue.  
    Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
    The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600.  The PCs print fine.  
    The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
    Please help, I appreciate any support.  
    As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
    Thank you,
    This question was solved.
    View Solution.

    Hi,
    More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
    First try unplugging the router for 30 seconds.
    Plug it back to the power and wait for 2-3 minutes.
    Turn the HP printer Off and back On, then check for any difference.
    If the same persists, try changing your router configuration as following
    Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
    Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
    Click the Advanced tab.
    Click the Setup option from the menu, then click on WAN Setup.
    Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
    Click the LAN Setup on the same Setup menu.
    Set the RIP Version as RIP-2 and Apply the changes.
    Reboot your router and then check for any change.
    I hope you may find that information useful, you may also use the user guide below for further information:
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My wireless HP Deskjet 3050 printer will not print from web sites.

    My HP Deskjet 3050 J610 printer will not print from web sites - it prints ok from WORD, etc. I keep getting the error message: "An unknown error occurred while printing." This problem only arises with Firefox browser.
    The printer is connected wirelessly to a network and this occurs when I use a laptop on the network. It is also connected via cable to a desktop computer but there is no problem in printing from the desktop.
    Any assistance would be appreciated.

    That sounds as if you need to investigate to see if you were able to clear all of the paper that was causing the jam. 
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for