Will not reboot?  screen has a lite glow but will not reboot?

My phone will not Re -Boot?  The screen has a light glow to it and I can hold down the power switch.  After 30 seconds or so, the screen goes blank - that's it? 

Make sure you are connected to power (ie not running off battery).
If you still have the black screen and can't get your Mac Book Air to turn off hold the power button until it shuts off.
Try a normal power on and if you get the same issue try a safe power on by holding the shift key during boot up.  If you can't do a safe boot up try doing a recovery boot by holding the command key + R key during boot up and run disk repair.
If you are still having issues contact Apple for service.

Similar Messages

  • HT204135 My computer is connected to my Epson printer but for some reason it will not print, it has a wifi connection but is not connecting for some reason, what can I do to resolve this matter?.

    My printer is not connecting with my computer via Wi-Fi, want can I do to fix this problem?.

    Exactly what is going on with my Epson XP 810.  I will reset my modem and it will print one or two pages and then say "Searching for printer" and it will never find it unless I reset the modem.  Was working fine last week so I don't know what changed. 

  • My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    Double Click home button, then tap the camera icon next to the slide to unlock.

  • My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    My I phone has plenty of storage but will  not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original  form with the price or free on the right hand side.

    Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
    Good luck.

  • My iphone 4s screen has just turned black but it is still vibrating. I was reading other messages similar and it says to resart phone but holding the home and lock button. However my lock button doesnt work what should i do?

    my iphone 4s screen has just turned black but it is still vibrating. I was reading other messages similar and it says to resart phone but holding the home and lock button. However my lock button doesnt work what should i do?

    Is it the Home button that doesn't work, or the Power (Sleep/Wake) button? If the Power button works, you can switch it off. Not sure how you have been able to do anything without the Home button working?
    Cheers,
    GB

  • TS1702 Has 2 app update but is not responding

    Has 2 app update but is not responding which click.

    If you are seeing a blank page in the Updates Tab of the App Store it  is a problem that many other users are reporting as well. It is a problem that has to be fixed by Apple. You will just have to wait until they fix it.

  • IPhone 4S will not charge. Can see battery icon but does not take charge

    iPhone 4S will not charge. Can see battery icon but does not charge

    Hello Kbeaty531,
    The following article provides some good information and useful troubleshooting steps for situations where your iPhone appears to not be charging.
    iPhone displays the low-battery image and is unresponsive
    If you see the image below, charge the phone with an iPhone USB power adapter for at least 15 minutes.
    You should see this image when iPhone begins to charge:
    If the screen still displays the low-battery icon, try turning iPhone off and then on again.
    If the issue persists, try resetting the iPhone while connected to the iPhone charger.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    When in iTunes on the computer,my our ipadmshould show under devices.
    Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
    Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
    If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
    Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

  • LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

    LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

    Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

  • Why will Adobe Acrobat not load PDF from my work website, but will load on other computers?

    Why will Adobe Acrobat not load PDF from my work website, but will load on other computers?  I have to log in to a website to get our orders, and we thought it was the website at first, but have since realized it is just my computer with this issue.  I have tried uninstalling and reinstalling the software and still it does not work. 

    You ask "why", but don't provide any information...
    What is your operating system?
    What is your web browser?
    Are you asking about Adobe Reader or Acrobat?
    What is your Reader / Acrobat version?
    What exactly means "will not load"?

  • IPad screen has gone blue/green and will not work

    My iPad 1 screen has gone to black when it is turned on and willl not work. Screen stays blue/green for about 30 seconds and then turns off. Unit is charged fully and has been updated to current operating software. Gerry

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then you could see if you can get it into recovery mode and restore it to your last backup : http://support.apple.com/kb/ht1808
    But you might need to contact Apple.

  • Screen has a white glow

    I dropped my Ipod, and unfornutalely (even with a heavy duty case) the screen has suffered
    damage and now has a white glow to it. This makes every thing really hard to see. I can still see my applications but not very well. Everything is functioning normally. I can see the screen clearly when I look at it from the side. Is the LED screen broken or is it a connection/ hard drive problem?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • My iPad 3 screen has gone completely black and does not respond

    MY iPad 3 screen has gone completely blank (blacked out) and does not respond to either of the power buttons.
    ANy suggestions?

    If the battery is not flat, try a reset.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • So, my ipod touch 4th generation has stopped working. every time i plug it into a wall or an outlet, it will regester that it has been plugged in, but it will not charge, and trurn on. does anyone have any suggestions? thank you.

    my ipod touch has stopped working. I will plug it into a wall, or computer, and it will register that it is plugged in, but it will not charge and turn on. does anyone have any advice? thank you.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch screen has turned white. the screen has turned bright white. it is not going by reseting also. when  i  shift screens then it leaves a trail and i dont know what to do. please help.

    my ipod touch screen has turned bright white. the things are visible but partially and when shift the screen it leaves trails behind. i dont know what to do help please.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • My PS CS6 with camera raw 8.4 will not open Nikon D4s NEF files-

    I have just upgraded from CS 5.1 to CS6.  The initial installation went smoothly and everything seems to work as it should.  The CR was version 7.  I then installed all of the updates using the Check Updates option from the menu.  That went fine also

  • Video sound and picture on tv.. question about burning to DVD

    Hi I finally got the picture to show up on the TV. I went into video, settings and turned on the TV out setting. Now I wonder if I can burn the itunes shows I bought onto a dvd? Will this be a backup copy incase my computer dies or will I be able to

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. T

  • Compund primary key in entity bean

    hi, can somebody please explain how to use the compound primary key in entity beans? i have got a database table, the key of which consists of three fields, which I assign as PK when setting up the entity bean. In turn I get a compoundPK class, but w

  • Converting External Ship-to-party number to Internal ship-to-party number

    Hi Friends, I am working on Ale idoc scenario in which i need to create sales order from customer purchase order. for this i need to maintain ship-to-party number in advance. Customer is providing me with list of ship to party number, but i dont want