Will not recongize DVD formats

since upgrading my dvd player will not recongize DVD R. It sees CDs. It will also see DVD RW BUT, it sees the DVD RW as 522 mb. device manager states dvd player and drivers appear fine. itunes diagnostics see player but not dvd R. diagnostics sees DVD RW (but as having only 522 mg.)
any ideas. tried the filters. deleted the lower filter in the regedit and made sure that GEARAspiWDM was in the upper. no difference.
thanks,

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 530s
iTunes 10.1.1.4
QuickTime 7.6.9
FairPlay 1.10.14
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.0.69
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 8AF0346D7C88BD42
Current user is an administrator.
The current local date and time is 2010-12-26 08:22:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) G33/G31 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.1.4 is currently running.
iTunesHelper 10.1.1.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVD+-RW GSA-H73N, Rev C109
Drive is empty.
thanks.

Similar Messages

Satellite A40-151 DVD drive will not play DVDs

hi my dvd drive will play music cd's but when i try to play a dvd it just makes a beep and nothing happens i tried windvd and it comes on but everything is blurred and still wont play a dvd

Hello John
Please dont be mad on me but in your posting there is no question or something just small report that DVD drive will not play DVDs.
Anyway, if I am remembering well your unit is about 2 years old and has probably DVD-CDRW (Combo) drive. In my opinion there is no much to do. If the drive has problem with original DVDs I presume that there is laser calibrations problem and the device must be replaced.
I dont know how old is your unit exactly but please check if the warranty is still valid. If yes contact service partner in your country immediately. The drive should be replaced for free. If not you must replaced it on your own. If the drive replacement costs too much I recommend you to use external device (I do it with my old Satellite). On this way I can use newest and very fast super multi DL devices and also create own DVDs.
You can also try to find already used DVD/CD-RW drive and replace it alone. If you need assistance by replacement please write again.
Once again, dont be mad on me. I am ready to write my opinion but it is really annoying when someone write just one sentence and nothing more.
Good luck!

My iMac (24-inch, Early 2009) will not play DVDs.

My iMac (24-inch, Early 2009, purchased new from an Apple store) will not play DVDs. When I attempted to open the DVD Player file in Utilities I got the following error message: ‘A valid DVD drive could not be found. [-70012]’ I've downloaded nearly every software update that Apple has notified me has come available. It's been several years since I last used the CD/DVD player, but i was quite surprised and unhappy today when it spat out every DVD I inserted. Anyone know how I can resolve this problem?

Hi there,
Your machine should be supported, the requirements for Mountain Lion are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
You must also have:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Also, you might like to try unplugging any external drives, and backup ones, and try again.
Nathan

IMac will not play DVD Movies

I have a first generation iMac G5 (OS 10.4.11) with a "MATSHITA DVD-R UJ-825" drive which plays CD and software DVDs fine, but it will not play DVD Moives, burned or commercial. When inserted, they spin for a minute then I get an error message "The disk you inserted was not readable by this computer." But it should be.
I have tried updating firmware, but the update said I did not need it. Also tried deleting the "com.apple.DVDPlayer.plist" as suggested in an earlier post. Nothing has worked.
I had this problem years ago and have updated the system since but DVDs still will not play. Does anyone know how to fix this or download a new DVD driver?

I do have the exact same problem, but even worse: my superdrive won't even read a software DVD. I would like to upgrade to Leopard (I bought the upgrade DVD) and I can't read it. Is there a way either to make the superdrive work again by myself or use another computer's drive for this purpose (upgrade to Leopard)?
Thank you for your support.

I have an IMAC and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected.

I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected. How do I fix this?

try resetting the System Management Controller (SMC).

HT3965 i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

If you think the emoji is the cause of the problem, why not remove the emoji from your name?

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

That code is not really useful since it just means it can't write DVD's (or probably CD's). The only thing you can do is first to try a different brand of DVD's, higher quality. You could also try burning at a slower speed.
Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related. You may also have a failing Super Drive, another consequence of an older Mac.

My macbook pro has mountain lion installed and it will not play dvds

my hubby's macbook pro has mountain lion installed, and will not play dvd's. It says it is unsupported, I also have a macbook pro but has snow leopard on it, mine will play dvd's. Please help me, I can't figure out why his won't play the same dvd's as mine.

The most frequent problem in an optical drive is a dirty lens. Use a lens cleaning DVD, a few shots of compressed air in the slot or a fine microfiber cloth (eyeglass lens cloth) wrapped around a business card and gently inserted inside the slot. If no success, the Apple store genius bar is the next stop.
Ciao

Will not recognize DVDs, including the new OS X Snow Leopard install disk

I just got a used, year-old Macbook Pro and it will not read DVDs and was brought to my attention when I tried to install the new OS X 10.6 and it would make noises like it was trying to read the disk, and then it ejects the disk every time I try. I tried multiple DVDs and it did the same **** for everything I put in. It reads CDs completely fine and even burns CDs but for some reason it does not read DVDs. Any suggestions are very helpful.

Not recognizing / mounting discs: I used to think this was a cleaning issue, and found myself removing my optical drives, taking them apart, and cleaning the lenses, etc. whenever the problem occurred. Then one time decided to simply disconnect the drives, restarting the system with the drives disconnected, then shutting down, reconnecting the drives, and restarting... bam. Drives were good to go, the problem fixed- discs mounting just fine. Apparently it wasn't the "cleaning" I was doing, it was the disconnect / reconnect that was fixing it. I don't bother cleaning them any more. Now I just do the disconnect/reconnect dance. I would consider this as being something related to the SMC, except the same issue existed with my G5, which did not utilize the SMC function as with the Intel machines.

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair.

I have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

Handbrake is not ideal for this.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

Tecra 8200: drive will not read DVD-R or DVD+RW

I have a Tecra 8200 running on Win98.
It has an SD-R2002 Rev A combo drive with firmware 1324.
It reads commercial DVDs OK, but will not read DVD-R or DVD+RW (booktype set to DVD-ROM) disks (I don't have any other types to try).
Is this correct or is the drive faulty?
If it is broken I would like to replace it with a DVD writer. Is there a writer that will fit this laptop?

The drive is not faulty. It is just DVD-CDRW drive, as Gipsy said.
I didnt find any info about compatible DVD burner for this unit. Problem is that this unit has no firewire or USB 2.0 ports and you can not even use external one. Maybe if you use USB 2.0 PCMCIA card.
The unit is about 5 or even 6 years old and you maybe expect too much. ;)

Will not recongize DVD formats

Similar Messages

Maybe you are looking for