Will not ring when income calls

I have tried with Verizon to get issue of phone will NOT ring when a call comes in.  Have checked settings and all seem correct.  Help

Call *73 to insure your phone is not forwarded. Is it all calls or a specific number?

Similar Messages

  • My phone will not ring when a call is coming in? Please help?

    My phone will not ring when a call is coming in.?

    Yeah, because if the switch isn't on, the phone is put on vibrate.

  • My iphone 4s will not ring for incoming calls...I've checked Do not Disturb, changed my ringtone to default and did a soft reset.  It will vibrate but not ring.  What can I do?

    My iphone will not ring when calls come in.  I have it set to ring and vibrate.  The Do not disturb is turned off and I have reset it but still it will not ring. What can I do?

    Check and see that the silent mode switch on the upper left side is toward the front of the iPhone and there is no orange or red showing.

  • HT201401 my phone only vibrates and will not ring on incoming calls.  How do I fix this?

    My phone only vibrates and does not ring on incoming calls.  How do I get the audible ring?  John

    on left side of your phone you have volume controll an right above that is a small button an if you see a orange or red dot you are in silent mode flip the switch up an it will remove silent .

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • HT4623 I updated my phone to iOS6 and now it will not ring for incoming calls.  It blocks my landline number.  I've tried resetting, updating, etc.  I've gone to the Verizon store.  They were puzzled too. Any ideas of what I should try next?

    I accepted the push to update my iphone to iOS6....now it will not ring.  It blocks calls from my landline. Help!   I've tried resetting, etc.

    It has been caused in an OTA glitch.  You need to hook it up to your computer, restore and update off of iTunes.  Good Luck.

  • My iPhone will not ring when a call comes in. It goes straight to voicemail.

    What can I do when my iPhone does not ring, and just goes to voicemail?

    Call your wireless carrier.  I had the same issue once.  the problem was on their end.

  • My iPhone will not ring when receiving calls

    After updating my iPhone with the 5.0 revision, my phone ceased to ring. All my settings seem to be proper and the ringer volume is set on top level.

    Same here for my husband and myself. If I figure this out I will let you know.

  • HT4528 my ringer will not sound with incoming calls, please help

    my iphone 4s will not ring with incoming calls.  any ideas on how i can fix it?

    Try sliding the button that is above the volume up and down buttons to see if you have it muted.

  • My iPhone 5 will not ring when my phone number is called.

    Despite the "Silent" button on the side of the iPhone 5 being set to off, and the ringer turned on full blast, my iPhone 5 will not ring when any number calls my phone. This is not an issue with the settings, which are all set for the phone to ring. Has anyone else run into this problem, or may have a solution besides taking the phone in for repair? My phone is no longer covered under the one year limited manufacturer's warranty, so any repair is likely going to cost a minimum of almost $300.
    Thanks in advance for the help!

    MJT's iMac wrote:
    ... This is not an issue with the settings,...
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...

  • Phone will not ring when called

    Hello... I just purchased the iPhone from AT&t and the phone will not ring when called.  I have gone  to settings, sounds, ringtones and all looks good.  Phone sometimes shows a caller is calling but not always and it is not ringing.  Please help>>>

    If the issue is still occuring try a restore just in case.
    If that does not solve the issue..... Take it back to where you purchased it from
    AT&T's DOA (dead on arrival policy) is 30 days from the day of purchase.
    They should be able to replace the iPhone for you as long as you ask them to within 30 days of it being purchased.

  • Laserjet cm1415 will not stop showing "Incoming Call"

    I have the fax setup in manual mode and it will not stop showing  "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
    Thanks

    The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
    If this message is showing up when no fax is being sent, then it means that there is noise on the phone line.  You can contact your phone company to discuss options in reducing the noise on your phone line.
    If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise.  It is possible that the internal fax parameters have become corrupt.  If that is the case, then you can perform a "Restore Defaults"  in order to reset them.  Note: doing this will erase all of your settings.  You can print out a configuration report before doing this so you can reset them.  A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
    This is based on my own experience with the product.
    I am an HP Employee.

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • My i4s phone does not ring on incoming calls.  The settings appear to be correct

    My i4s phone does not ring on incoming calls.  The settings appear to be correct for the phone to ring.
    Also, during a call, when I hit the speaker buttom, I can neither hear nor be heard by the other party
    Any suggestions?

    Try a factory restore, this might be a software problem so just plug into itunes and go and click the restore button. If this doesnt fix it then its a hardware problem meaning you need to head to an apple store for a replacement.

  • Why my brand new iphone 4 will not ring on a call but will play any other sounds?

    When I play music, movies or ckeck the ringtones an other alerts, it sounds.  But it will not sound when receiving calls.  Please, help

    Check the switch above the volume buttons, red is silent mode, if it isn't red you should hear it ring.

Maybe you are looking for

  • Acrobat increases size of file when no text is present

    I an using Acrobat 9.  I have a certificate returned from the printers and the size is 115Kb.  I have put 8 lines of text on the entire document and the email size increase to 2985 Kb - no images or pictures in my text.  If I remove all the text and

  • Format Changes In Chart Anlyzer Not Saved

    Post Author: Ray Brack CA Forum: Charts and Graphs I have created a vertical bar chart in CR v8.5 and have made several formatting changes using Chart Analyzer, changed the height of the graph, fonts, font rotation, etc.  However after saving the cha

  • Fwrite (junk characters)

    Hi, I have problem with this code it put the junk data in output file : #include <stdio.h> #include <string.h> int main (int argc, char *arg[]) char data[6]; char fil_date[20]; memset ( data,"ALTA",5); fp = fopen("abc.txt","w+"); sprintf(fil_data,"%5

  • My iPhone 6 shows storage full and it shouldn't be close! Running iOS8.1.3

    I got an Apple iPhone 6 recently and updated to iOS 8.1.3 and now I constantly get "device full" warnings. It says I have zero percent available but when I go to manage sstorage I have less then 1 gig actually used but it says I've used 14.1 gig... W

  • Time capsule putting files back in trash

    I have been having problems with the time capsule getting stuck on preparing back up. I managed to trash the partial backup and get it working again. Now every time it does a back up the trash fills with back up files and then empty's again when the