Will not start or wake up

Ive plugged, replugged, removed, replaced, everything i could on my ibook g4. i bought a new battery and a new powercord thinking those were the problem here, however it still will not alleviate my problem. when the cord is plugged in it will go orange and when its adjusted it goes to green, with or without the new battery. the battery will not charge if left with powercord connected even all night long. im really getting upset having to use another computer in my house with crappy windows 2000 on it & besides missing all my files which seem to be unattainable at this point. HELP!

Hi,
Can you boot off the installation CD without the battery installed?
Also, check the "prong" on the power socket of the G4 - make sure it's not crushed. It has to touch the center prong of the power jack. Everything you've described suggests the center prong of the power socket is not making contact. If you're lucky, you'll be able to straighten it out with a pair of extra-fine forceps (tweezers). Otherwise, you'll have to replace the power socket. Try www.ifixit.com if you want to fix it yourself or (sigh) Apple.

Similar Messages

Mac Pro will not shut down, wakes from sleep and will not start up in safe mode (restarts).

Wakes from sleep about every 4.5 mins, here is the log from wake from sleep:
7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
Will not shut down, restarts at end of shut down. Log:
7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face001, 0
7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
And will not start up in safe mode. I have reset PRAM and SMC. Also restarted with no startup items, no luck. Had the problem of waking from sleep and not shutting down in 10.7, updated to 10.8 hoping for fix, no luck. Any help would be appreciated.
Thanks

Hi, this log has some similarities to my ipod touch which seems to be not sleeping properly due to wireless issues. Can I check - are you using a wifi connection - if so have you tried ethernet?
log entries below ...
Sep 5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
Sep 5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:28:58 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:28:58 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 1
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 2
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48928, respLen 1152.
Sep 5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 3
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 4
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48929, respLen 1152.
Sep 5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 5
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::dumpDebugInfo(): CRITICAL ERROR: handleTransferError
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): Tx: seq 185, credit 191, flow 0x0; Rx: seq 167
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): state 0x23, sd-clk +1, sd-rate 20250000 Hz
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logClockState(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): Triggered Watchdog after 6 errors (last was SDIO Cmd Timeout)
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacketChain() Unable to wake bus; error SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 0
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::doOutputPacketChain(): Packet transmission failure: SDIO Cmd Timeout
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleWatchdogTimeout(): Watchdog timer fired
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::watchDogReset(): fStateFlags(0x140E3), thread(00040532)
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::halt()
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc11a7a00, BSSID = 00:18:4d:67:54:12, rssi = -45, rate = 54 (100%), channel = 7, encryption = 0x8, ap = 1, failures =   0, age = 39, ssid[ 9] = "polarbear"
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Sep 5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): start
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): finish
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: BCMWLAN Firmware Version: wl0: Aug 26 2011 02:34:35 version 4.221.54.22
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: nvram file version 4.221.54.22
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): country code set to XX2
Sep 5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): Packet glomming ON (mode=7)
Sep 5 00:29:36 Peters-iPod wifid[13] <Error>: WiFi:[368494176.616677]: Processing link event DOWN
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): There was an existing PNO config, reprogramming
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2469 RoamScan feature is not enabled for this platform
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): successful initialization
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(40e3)
Sep 5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
Sep 5 00:29:37 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
Sep 5 00:29:37 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:37 Peters-iPod mDNSResponder[34] <Error>: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95de0>: Error Domain=NSPOSIXErrorDomain Code=57 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -S-o-c-k-e-t -i-s -n-o-t -c-o-n-n-e-c-t-e-d-" -U-s-e-r-I-n-f-o-=-0-x-1-8-2-5-e-0 -{-}
Sep 5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95e40>: Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-k-C-F-E-r-r-o-r-D-o-m-a-i-n-C-F-N-e-t-w-o-r-k -e-r-r-o-r -2-.-)-" -U-s-e-r-I-n-f-o-=-0-x-f-e-8-e-2-4-0 -{-k-C-F-G-e-t-A-d-d-r-I-n-f-o-F-a-i-l-u-r-e-K-e-y-=-8-}
Sep 5 00:29:39 Peters-iPod wifid[13] <Error>: WiFi:[368494179.091333]: Processing link event UP
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: [139978.345418625]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc067f800, BSSID = 00:18:4d:67:54:12, rssi = -49, rate = 54 (100%), channel = 7, encryption = 0x8, ap = 1, failures =   0, age = 1, ssid[ 9] = "polarbear"
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AirPort: Link Up on en0
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: en0: BSSID changed to 00:18:4d:67:54:12
Sep 5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6, reason = 0, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:00
Sep 5 00:29:40 Peters-iPod kernel[0] <Debug>: [139980.075593458]: AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.0.95, entering powersave mode 2
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: Captive: en0: Not probing 'polarbear' (protected network)
Sep 5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
Sep 5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
Sep 5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
Sep 5 00:29:41 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1

My ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. I do?

please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?

Hey saintbless,
Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Will not turn on or screen remains dark
- Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
- If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
- If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
- If the screen remains dark and will not turn on, then your iPod may need service.
Thanks,
Matt M.

Wallstreet will not start

Looking at these forums, it seems to be the time for Wallstreet power problems...
Anyway, I wonder if anyone can offer any advice...I've already tried much of what is suggested here.
I have a 233MHz 15" Wallstreet. This morning, the lid hinges finally gave out, so I decided to have a look at the problem - flipped the keyboard, decided against it, put it back. Now, the machine will not start.
As soon as power is connected (battery or power adapter), the fan comes on. And stays on. The computer will not start. I have tried resetting the PMU with battery in, out, power adapter connected, not connected, all combinations of the above. But as soon as any power is connected, on comes the fan. I have tried disconnecting the keyboard and re-seating the PMU ribbon cable. No luck.
Any other suggestions of things I could try? I am leaving power disconnected overnight, but if that does not work it would be nice to have some other ideas!
If not, I'll be trying to but a case for the HD so that I can mount it on one of my more recent machines to get the data off it...
Many thanks,
Mark.
Powermac G3 Wallstreet Mac OS 8.6 or Earlier
Powermac G4 Mac OS X (10.3.9)

opensource,
Hearing the startup chime (bong) is a good sign; this means the powerbook has had a successful initialization of the hardware necessary to boot up.
The Wallstreet can also have a long period of inactivity after the startup chime when performing a cold start. If you have 256MB of installed RAM, for example, you may wait as long as 30-40 seconds from the startup chime to first light of the display. This is normal; the Wallstreet is performing a memory test during this period. Give her a full minute until you decide there is going to be no start.
When you connect the power adapter and get the sleep light and a brief runup of the fan, this normally indicates you have a corrupted power manager. This usually happens when there is no working or charged main battery and the powerbook is unplugged from the power adapter for a period of time. The internal, rechargeable backup battery (PRAM battery) will run down and the power manager is usually corrupted.
Here is information on the PRAM battery:
http://docs.info.apple.com/article.html?artnum=30580
Please try this series of tests:
1. Connect the power adapter, then reset the power manager with the powerbook turned off. On the Wallstreet, you simultaneously press the 'shift-fn-ctrl-power' keys. If successfully done, you will see a brief flash of the sleep light.
http://docs.info.apple.com/article.html?artnum=14449
2. Note if it has a normal startup.
3. Sleep the powerbook, then wake it. Is this normal?
4. Perform a restart and report your results.
If you leave the powerbook connected to the power adapter (and the power adapter is not turned off if connected to a power strip or switched outlet), does it always start normally?
Please also take a look in the System Profiler and see if it reports the 512K of backside L2 cache. You may have the 233MHz/0K CPU but I doubt it...it would be as slow as molasses.
There are other possible causes for your problems but let's see what turns up.

Iphone 4 will not start up...the apple icon comes on and then goes off and then comes on and goes off again continuously....any ideas?

Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?

1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
Using this article will erase everything on the device, so make sure you have a backup!
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
JW
Message was edited by: jesterwylde

My Ipod touch will not start up and the menu will stay in I tunes!

My ipod touch will not start up and the menu will stay on menu of Itunes. Who can help me?

Hi,
Have you tried a hard reset of your iPod? Press/hold the home and sleep/wake buttons down until the Apple logo appears.
Hope this helps!
---likeabird---

Hi, My iPhone will not start up . I plugged it into my iMac and it cannot find it .

Hi , My Iphone will not start up. when I plug it into my Imac , it cannot find my phone ?

Suggestions: 1. make sure you have the lates version of iTunes; 2. try resetting your iPhone before syncing (
Hold the Sleep/Wake button and the Home button together for at least ten seconds until the Apple logo appears; when you see the Apple logo let go of both buttons and your iPhone will reboot); 3. try using a different cable.

My IBOOK has shut down, and will not start back up

ok here is what has happened. yesterday my 1.2ghz g4 ibook started randomly shutting down. it would shut down and it would take a while of me pushing the power button to get it to start back up. when it would come on, it would switch between charging and not charged quite rapidly even though my power cord was in. now however, it has shut down and will not start up. the battery is fully charged. anyone have any ideas?

I'm telling you. I have lost all faith with Apple. The old iBook I had, 800MHz G4, simply worked fine with no problem waking up or starting up, although it's just a bit slow. Now, I am super frustrated when it just couldn't wake up, either with the sleep light flashing or not, ie it's black screen initially and when I press the Power button once to get it back to life, it just stays black!!!
So the only thing to do is to force power down by pressing the Power button for 10 seconds. Then I press the Power button once to start up, but it just stays black screen. I've left my iBook in that state for a day now, hoping that it will come back alife. But no! And the worst is, I had a similar problem starting up from wake just the day before. I called the Help Desk and they advised me step by step, from taking out the battery, to pressing OptionsCommand+PR, and OptionsCommand+OC, and doing Apple Hardware Test. The iBook seems to just work fine while on the phone with them. And barely 3 hours later, the thing just couldn't wake up. I've powered down and up many times now, and I've left it powering up, but still black screen till now (one day already).
Finding out about resetting PMU on the support page, I've also tried that, but it still can't work.
And you know what? I've sent this unit for repair 3 times already! First they say it's the HDD problem, so they changed that. Then when it still happened, they say it's the logic board problem, so they changed that for me. And again when it happened, they changed another logic board for me. So now, it's the fourth time, what do you think I should do? I don't think going back changing another logic board will help!
I am in fact ****** off! If Macs are great, then why me? Why my iBook? I am telling this forum that we cannot accept a big corporation giving us sub-standard products. I've since read this forum carefully and found that many of us faced the same problem! We just cannot sit down idly and let the company get away with it. This is a warning to fellow users out there that face this same problem. Let us voice out our frustrations and make Apple give us some compensation for it. I say this because I depend on my laptop iBook for presentation to clients, and this happened exactly twice when I was in front of my clients. I don't mind losing face but can Apple compensate me for my loss of business and future business from my clients?
Voice out strongly your unhappiness to Apple now!

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

HP TouchSmart application will not start

We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
HP TouchSmart Calendar has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
Reminder clock elapsed event is successfully fired.
CheckReminder() is executed successfully.
ShowReminder() is executed successfully.
After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
Cheers,
G

Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Will not start or wake up

Similar Messages

Maybe you are looking for