Will not startup unless I disconnect the battery

I'm having an strange issue with my macbook pro (2011- 2ghz i7).  It runs fine while on a/c and on battery power.  Problem occurs when I shut it down.
If I tell it to shut down it will not power back on until I remove the back plate and disconnect and reconnect the battery.  Once I do this it seems to run fine. 
I will note that my daughter tends to use it until the battery goes dead and on more than one occasion.    The battery seems to hold a charge just fine it's just that the machine will not power on after a shutdown even while plugged in a/c and full battery.

David,
which version of OS X is installed on your MacBook Pro?
Try starting up in Safe mode, log in, and then shut down. Is your MacBook Pro able to power on without disconnecting the battery then?
If you have a bootable external drive, use Startup Manager to boot from the external drive, log in, and then shut down. Is your MacBook Pro able to power on without disconnecting the battery then?
For the sake of your MacBook Pro’s battery life, your daughter should start recharging its battery when it gets down to 20%.

Similar Messages

  • Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

    Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
    It has only happened for the last month or so
    Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

    Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

  • TS1382 My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible on the screen.  The cord works fine to charge my I-Pad.

    My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible.  The cord works when charging my I-Pad.  Any ideas?

    Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
    Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
    Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

  • IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software is up to date with 6.1.6.  PLEASE  HELP!

    version 6.1.6(10B500); model#MC547LL/A; 60GB (40 used/20 avail)
    IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software states up to date with iOS 6.1.6.  PLEASE  HELP!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Birthdays noted on my calendar will not print unless I check the box "other" on the print dialogue screen.  I'm using OS Yosemite 10.10.1.

    Birthdays noted in my contacts and calendar mac screen will not print unless I check the box "other" under "calendars" in the print screen dialogue box.

    Birthdays noted in my contacts and calendar mac screen will not print unless I check the box "other" under "calendars" in the print screen dialogue box.

  • Battery drained while computer in use.  Plugged in and computer will not turn on.  Does the battery need to reach a certain charge level first?  Battery is 3 months old.

    The battery drained while using the computor so we pluged it in but computor will still not fully turn on.

    Welcome to the Apple Support Communities
    Hold the Power button for about 5 seconds to turn off the Mac (it may be turned on), and then, press it again. If it doesn't work, reset the SMC > http://support.apple.com/kb/HT3964
    If nothing works, take the Mac to an Apple Store or reseller to get your computer repaired. Also, if you have its charger connected to the computer, is the charger light turned on?

  • My ipod nano will not work unless connected to the internet - what can I do

    I have just downloaded music, pictures, etc., charged the battery and safely disconnected, but my ipod does not respond after the eject from I-tunes. What can I do to find out how to get it to work?

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Next, try doing a manual install/update using the instructions here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • HT1476 Hi there my i phone will not charge i have replaced the battery and tried different cables but still not working! what can i do now?

    Hi There my i phone will not charge all of a sudden tried using diffrent cables and now i have had the battrey replaced but still nothing. It is now completey  dead.  Not sure what ealse to do?

    Hey jojo-10!
    Here is an article for you that can help you troubleshoot this issue with your iPhone:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT201263 MY IPHONE 5 WILL NOT CHARGE AT ALL AFTER THE BATTERY RAN OUT. ITUNES IS NOT PICKING UP THE IPHONE AND TRIED SEVERAL GENUINE CHARGERS AND STILL IS NOT CHARGING JUST A BLACK SCREEN. THE PHONE HASN`T BEEN DROPPED OR GOT WATER IN IT. IT ONLY 12 MONTH

    I have the Iphone 5, it is just over 12 months old, and it was low on charge, by the time I could get to a charger it had cut out. So i plugged it in the charger like no other time, went back after 10mins and noticed the screen was still black. So i tried to turn it on but nothing still black screen, i changed the charger for my other apple charger and the same thing happened. i decided to plug it in using the usb in the computer and still the same thing has happened. Took it to the apple genuis team to be told they can`t do anything, and now its out of its 12 months warranty makes it even more difficult. Has anyone else had this issue, this is my 4th iphone since they released them and am very dissappointed to say the least that the iphone 5 for me seems to have a life span on just over 12 months and no one is prepared to take any responsiblity as i have not damaged it. One extremely dissappointed Iphone user. Any ideas on how to get it working again?

    Hey jojo-10!
    Here is an article for you that can help you troubleshoot this issue with your iPhone:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • If I bring up fire fox and not connected to internet I get and error when I shut it down and connect to the internet and bring firefox up it will not open unless I remove the prosses in task manager is this normal

    when shuting down Firefox after not being connected to the internet the processes remains and I have to go into task manager and remove the process manually or I get a message that Firefox is already started and it will not come up

    Sofar I have found (off internet),
    A)that if you go into sleep mode, the wifi shuts down or powers down.
    B)sleep mode must be disabled in order for wifi to continue.
    C)you can check this by going into wifi and seeing the iphone every 20 seconds or so looking.
    D)as far as handoff ,I still not to sure but I think BOOTH units must overlap each other in order to handoff from 1 to the other.
    Show much bs on the web that I have to filter the pages and there not enough time in the day to go thru it all.

  • G5 Dual 2.5 CPU Power PC will not boot unless I remove the Plastic Sheild.

    G5 Dual 2.5 CPU with 4 gb of memory will boot everytime if I take the plastic sheild out. I bought it from a guy who would turn it on then let it sit until the fans revved up after about 5 to ten minutes. I figured out that it would boot everytime if I removed the plastic sheild. Now I am trying to find a permanent fix for this issue.
    Thanks for any assistance anyone can give.

    I don't think its just a plastic shield and door - there is a contact switch that signals when these are removed and the fans rev up to a higher speed. My guess is its the higher speed of the fans that's keeping things cool during the power surge of the boot stage thats allowing it to startup.
    When the doors are on and the fans are kept low there must be some hardware failure that is occurring during boot up - that seems to be prevented when speeding the fans up. And after the initial boot up power surge, things run cool enough that I can safely put the plastic shield and door back on and the computer keeps running fine (it ran OK all night).
    I can think of no other logical explanation at this time.
    Any other ideas?
    What puzzles me, is I use this computer to do some heavy 3D graphic renders and have run it intensely for days at at time with absolutely no sign of failure during operation once its booted up. I've never had a freeze or anything like that. So when its so reliable during operation, why so fragile during boot up?

  • My ear buds will not work unless i hold the plug in

    Can not get my ear bud to work unless I hold the plug snug to the phone if I let go it they do not work  What is the problem ?

    the the headset connector is a common type which have been used for many many many years
    the sony walkmen in the 80's had the same connector and if you connected your iphone headset to an old 80's walkman it would work
    but if you did (or any other device with a mini jack 3.5mm connector) and it only worked if you hold the plug in then your headset is damaged and require a replacement

  • My iPad 3 64gb is in recovery mode and will not startup correctly, stuck in the boot logo loop..

    problem is iTunes wants to restore while I have no backup(i know stupid move on my part esp. since I just got back from an amazing summer trip and so....yea Ive been busy and really it is my fault.  I had bought this iPad from ebay  for a good deal tho it did have some physical damage and a small glitch. I had it for a year now and it was working just fine  up until a couple of  weeks ago. I think my kid brother tried to update to iOS 8 and it caused it to do what it is doing now. I heard people have been able to get to of the loop without restoring. I'm a college student  and so I've had little time to work on it. I tried a few ways using wondershare and some other program but nothing has worked. I'm really trying to avoid restore on iTunes so if you guys can help me get my iPad back to normal that would be great!! 
    If I do restore and then (I'm sure) it will delete all my pics (which is what I'm most worried about) then will there be some way I can get them back using a program like wondershare dr phone?? I am especially asking those who have experience with this. if it is a bit complicated, do you think I should take  it to some professional they'd be able to take care of this problem?
    thank your for your time! i do appreciate it!!

    I checked more than once.. sometimes I turn it off for different reasons
    what ***** is I planned on uploading the pics but then this happened..I'm not sure why it even went into the apple logo loop. I heard you can get out of it but I tried a few problems and was unsuccessful. If you or anyone have knowledge of any programs I could use I'd greatly appreciate it
    thanks for your response!!!

  • MacBook does not startup unless I reset the PRAM.

    Several times now I have turned on my MacBook and been greeted by a dead, blue screen. The computer does not load Mac OS X from this state. If I reset the PRAM (by forcing a shutdown and then holding CMDOPT+PR when the computer turns on) Mac OS X loads. Why does this happen?
    I have made some modifications to the computer that may have influenced its performance.
    1. Upgraded to 2GB RAM.
    2. Uninstalled extra languages using the program Monolingual.
    3. Disabled Dashboard.
    4. Disabled Spotlight.
    5. Disabled Journaling on my harddrive.
    6. Repaired disk permissions.
    7. Cleared logs and caches and ran Cron Scripts using the program Ultimate Task.

    I think I have some other information, or hypotheses which i'd love other users to share information on.
    I notice, that when i have this problem, that in System Preferences/Startup Disk that the MAC OS X system is not selected/highlighted.
    Also, I was thinking, perhaps this is due to having bootcamp/windows installed ?
    So 2 questions:
    Do users experiencing this problem have Bootcamp installed with a windows system on their mac
    and
    After getting the dark grey screen and starting up (by resetting PRAM), does the System Preferences/Startup Disk that the MAC OS X system is not selected/highlighted ?
    If this is the case, I guess we have a bit more information to go by...
    If users that are experiencing this issue do not have bootcamp installed, then at least we can rule out bootcamp (since it is a beta).
    If users are reporting the same nonselection of the system volume in system preferences, then at least we're talking about the same problem.

  • Safari will not open unless I disconnect

    Sometimes I have to disconnect & reconnect ethernet cable before Safari will open

    Yes, I did, but it didn't work. I changed to a new cable & it still does it once in a while. Could the input socket
    be bad?

Maybe you are looking for

  • How to import footage to an external hard drive in Final cut pro X

    I am having trouble importing footage from camera directly to an external hard drive in final cut pro X. When I go to import the footage, and select where I want it to be saved, my external drive is not even listed. It shows up fine on desktop and in

  • Change display settings to 1024x768 stretched?

    Hi all, I want to be able to change my display settings to 1024x768 streched? You use to be able to do in lion but the option is not there on mountain lion, and if you change it to 1024x768 it leaves the black borders on the sides instead of strechin

  • Sql loader error in offline data load

    Hi, I have done an offline schema creation using existing tablespace. I am trying to do an offline data load using sql loader.The CTL and DAT file are generated by the work bench. This is my CTL file code generated by workbench. load data infile 'Imp

  • MARS and Symantec Endpoint Protection (SAV 11.x)

    MARS uses AMS to retrieve/parse messages from older versions of Symantec Antivirus. AMS doesn't exist in the newest version (aka Symantec Endpoint Protection). Is there a way to integrate SEP messages into MARS? If not, does anyone know if Cisco has

  • Idoc DEBMAS06 in ECC 6.0

    Hi, I have the follow problem: i have an idoc DEBMAS06 in status 51 with mesagge BP00 022. The value of field GBDAT ( field of error)  20090701. Before the upgrade from 4.6 to 6.0 the  idocs were in status 53 (OK status). Where is the problem? Thanks