Will NVIDIA GeForce2 TwinView drive a 23" CHD display?

My 17" Studio Display (ADC) went completely dark (dead) yesterday and I was thinking of getting a new Apple 23" Cinema HD display (DVI). I would like some informed opinions as to whether my current G4 NVIDIA GeForce2 TwinView (64MB) card will adequately drive the 23" HD display to full resolution. If not, what limitations would I run up against? Would the Apple 20" Cinema HD (DVI) display be a better choice? If yes, why? If neither of these would work correctly, can anyone recommend a graphics card update? Genius Bar at my local Apple store said use the ADC to DVI adapter and I would have no problems but I am very suspicious of that answer. Any insights would be helpful.

Got the new monitor hooked up last night, and all is working properly.
It replaced a 21" Apple CRT that lasted nearly 9 years. It would periodically just turn off - could be after 5 hours or 5 minutes. I am guessing it's a relay in decline, which after investigation I decided was a fix I didn't want to get into either DIY or paid repair.

Similar Messages

Will Nvidia update the driver for quadro 4000 for mac? When?

Will Nvidia update the driver for quadro 4000 for mac? When?

Not sure when/if they will make an update to the Quadro 4000 driver but I've been running the current driver without any issues.
Are you experiencing any problems? If so please explain.
Here the links to the latest driver:
http://www.nvidia.com/object/macosx-cuda-5.5.28-driver.html
http://www.nvidia.com/download/driverResults.aspx/68439/en-us
Thanks,
Peter Garaway
Adobe
Premiere Pro

Will NVIDIA FX 5200 drive a 23"?

Hello-
I have a Power Mac G5 1.5, single processor, late 2004 build, with the NVIDIA GeForce FX 5200 Ultra video card as orignally spec'd. Will the card drive a new 23" cinema disply?
The specs for the card say it will support 1900x1200, and it has DVI, but I'd like to know if anyone has this setup working, are there issues I should know about, or do I need another card?
Thank you

Got the new monitor hooked up last night, and all is working properly.
It replaced a 21" Apple CRT that lasted nearly 9 years. It would periodically just turn off - could be after 5 hours or 5 minutes. I am guessing it's a relay in decline, which after investigation I decided was a fix I didn't want to get into either DIY or paid repair.

Studio Display - Family M2454 with NVIDIA GeForce2 MX

I've recently acquired an older Studio Display LCD (M2454) and would like to use it with my G4 867-MHz PowerPC G4 (Quicksilver). However, while the Mac works great with my analog CRT Studio Display, whenever I plug in the LCD display, the Mac will not start up. Starts up fine whenever the LCD ADC connector is not connected to the video card (whether the CRT display is connected or not.)
Any hints for troubleshooting this situation? Is the digital side of the NVIDIA GeForce2 MX dead? or is the LCD dead? or neither and something else needs attention? I've run the 2004 NVIDIA Firmware Update 1.1 successfully.
Power Mac G4 Mac OS X (10.4) have several other Macs

I have the same problem. I had the CPU and the display packed in suitcases and when I got home the computer won't start up with the display plugged in. It will start up normally with no display--or I assume so since I can't see anything--and I can also use it as a FireWire target drive using my G3 PowerBook. This is very frustrating.

Xorg 1.8 - nvidia 96xx legacy driver

Since a few weeks I use Archlinux and I'was happy with it until my last upgrade. After this (incl. kernel 2.6.34 and xorg 1.8) I was lost in the dark. Googling learned me that the nvidia 96xx legacy driver (I have an old Geforce card) cannot cope with xorg 1.8 (yet??). Could this be better coordinated in the future?
If not, can someone please explain (in simple terms, I'm a newbie, what to do if such things happen).
Thanks in advance.

Lets see (long post)
uname -a
Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
[ 11.364]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.364]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 11.364] X Protocol Version 11, Revision 0
[ 11.364] Build Operating System: Linux 2.6.34-ARCH i686
[ 11.364] Current Operating System: Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
[ 11.364] Kernel command line: root=/dev/sda1 ro fastboot quiet 4
[ 11.364] Build Date: 21 June 2010 11:54:27AM
[ 11.364]
[ 11.378] Current version of pixman: 0.18.2
[ 11.378] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.378] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 02:17:21 2010
[ 11.401] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.401] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.450] (==) ServerLayout "Layout0"
[ 11.450] (**) |-->Screen "Screen0" (0)
[ 11.450] (**) | |-->Monitor "Monitor0"
[ 11.450] (**) | |-->Device "Device0"
[ 11.450] (**) |-->Input Device "Keyboard0"
[ 11.450] (**) |-->Input Device "Mouse0"
[ 11.450] (==) Automatically adding devices
[ 11.450] (==) Automatically enabling devices
[ 11.503] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.503] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.521] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11.521] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.521] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.521] (WW) Disabling Keyboard0
[ 11.521] (WW) Disabling Mouse0
[ 11.521] (II) Loader magic: 0x81e9d00
[ 11.521] (II) Module ABI versions:
[ 11.521] X.Org ANSI C Emulation: 0.4
[ 11.521] X.Org Video Driver: 7.0
[ 11.521] X.Org XInput driver : 9.0
[ 11.521] X.Org Server Extension : 3.0
[ 11.531] (--) PCI:*(0:1:0:0) 10de:0181:1462:9350 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 164, Mem @ 0xfb000000/16777216, 0xf4000000/67108864, BIOS @ 0x????????/131072
[ 11.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.531] (II) LoadModule: "extmod"
[ 11.580] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.589] (II) Module extmod: vendor="X.Org Foundation"
[ 11.589] compiled for 1.8.1.902, module version = 1.0.0
[ 11.589] Module class: X.Org Server Extension
[ 11.589] ABI class: X.Org Server Extension, version 3.0
[ 11.589] (II) Loading extension MIT-SCREEN-SAVER
[ 11.589] (II) Loading extension XFree86-VidModeExtension
[ 11.589] (II) Loading extension XFree86-DGA
[ 11.591] (II) Loading extension DPMS
[ 11.591] (II) Loading extension XVideo
[ 11.591] (II) Loading extension XVideo-MotionCompensation
[ 11.591] (II) Loading extension X-Resource
[ 11.591] (II) LoadModule: "dbe"
[ 11.608] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.618] (II) Module dbe: vendor="X.Org Foundation"
[ 11.618] compiled for 1.8.1.902, module version = 1.0.0
[ 11.618] Module class: X.Org Server Extension
[ 11.618] ABI class: X.Org Server Extension, version 3.0
[ 11.618] (II) Loading extension DOUBLE-BUFFER
[ 11.619] (II) LoadModule: "glx"
[ 11.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.050] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.050] compiled for 4.0.2, module version = 1.0.0
[ 12.050] Module class: X.Org Server Extension
[ 12.050] (II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
[ 12.050] (II) Loading extension GLX
[ 12.050] (II) LoadModule: "record"
[ 12.051] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.061] (II) Module record: vendor="X.Org Foundation"
[ 12.061] compiled for 1.8.1.902, module version = 1.13.0
[ 12.061] Module class: X.Org Server Extension
[ 12.061] ABI class: X.Org Server Extension, version 3.0
[ 12.061] (II) Loading extension RECORD
[ 12.061] (II) LoadModule: "dri"
[ 12.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.074] (II) Module dri: vendor="X.Org Foundation"
[ 12.074] compiled for 1.8.1.902, module version = 1.0.0
[ 12.074] ABI class: X.Org Server Extension, version 3.0
[ 12.074] (II) Loading extension XFree86-DRI
[ 12.074] (II) LoadModule: "dri2"
[ 12.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.075] (II) Module dri2: vendor="X.Org Foundation"
[ 12.075] compiled for 1.8.1.902, module version = 1.2.0
[ 12.075] ABI class: X.Org Server Extension, version 3.0
[ 12.075] (II) Loading extension DRI2
[ 12.075] (II) LoadModule: "nvidia"
[ 12.084] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.137] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.137] compiled for 4.0.2, module version = 1.0.0
[ 12.137] Module class: X.Org Video Driver
[ 12.137] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 9.0, need < 8.0). The driver will continue to load, but may behave strangely.
[ 12.175] (II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
[ 12.176] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.176] (--) using VT number 4
[ 12.178] (II) Primary Device is: PCI 01@00:00:0
[ 12.178] (II) Loading sub module "fb"
[ 12.178] (II) LoadModule: "fb"
[ 12.178] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.189] (II) Module fb: vendor="X.Org Foundation"
[ 12.189] compiled for 1.8.1.902, module version = 1.0.0
[ 12.189] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.190] (II) Loading sub module "ramdac"
[ 12.190] (II) LoadModule: "ramdac"
[ 12.190] (II) Module "ramdac" already built-in
[ 12.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.211] (==) NVIDIA(0): RGB weight 888
[ 12.211] (==) NVIDIA(0): Default visual is TrueColor
[ 12.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.211] (**) NVIDIA(0): Option "DPI" "96x96"
[ 12.214] (**) NVIDIA(0): Enabling RENDER acceleration
[ 12.214] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 12.214] (II) NVIDIA(0): enabled.
[ 12.706] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
[ 12.706] (--) NVIDIA(0): Memory: 65536 kBytes
[ 12.706] (--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
[ 12.706] (II) NVIDIA(0): Detected AGP rate: 8X
[ 12.706] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 12.706] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
[ 12.706] (--) NVIDIA(0): PCI:1:0:0:
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0)
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0): 350.0 MHz maximum pixel clock
[ 12.707] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 12.707] (II) NVIDIA(0): Validated modes:
[ 12.707] (II) NVIDIA(0): "856x481"
[ 12.707] (II) NVIDIA(0): Virtual screen size determined to be 856 x 481
[ 12.707] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 12.707] (--) Depth 24 pixmap format is 32 bpp
[ 12.709] (II) NVIDIA(0): Initialized GART.
[ 12.720] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 12.728] (II) NVIDIA(0): Setting mode "856x481"
[ 12.813] (II) Loading extension NV-GLX
[ 12.824] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 12.840] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 12.850] (==) NVIDIA(0): Backing store disabled
[ 12.850] (==) NVIDIA(0): Silken mouse enabled
[ 12.852] (**) NVIDIA(0): DPMS enabled
[ 12.852] (II) Loading extension NV-CONTROL
[ 12.852] (==) RandR enabled
[ 12.852] (II) Initializing built-in extension Generic Event Extension
[ 12.852] (II) Initializing built-in extension SHAPE
[ 12.852] (II) Initializing built-in extension MIT-SHM
[ 12.852] (II) Initializing built-in extension XInputExtension
[ 12.852] (II) Initializing built-in extension XTEST
[ 12.852] (II) Initializing built-in extension BIG-REQUESTS
[ 12.852] (II) Initializing built-in extension SYNC
[ 12.852] (II) Initializing built-in extension XKEYBOARD
[ 12.852] (II) Initializing built-in extension XC-MISC
[ 12.852] (II) Initializing built-in extension SECURITY
[ 12.852] (II) Initializing built-in extension XINERAMA
[ 12.852] (II) Initializing built-in extension XFIXES
[ 12.852] (II) Initializing built-in extension RENDER
[ 12.852] (II) Initializing built-in extension RANDR
[ 12.852] (II) Initializing built-in extension COMPOSITE
[ 12.852] (II) Initializing built-in extension DAMAGE
[ 12.856] (II) Initializing extension GLX
[ 13.318] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 13.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.318] (II) LoadModule: "evdev"
[ 13.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.326] (II) Module evdev: vendor="X.Org Foundation"
[ 13.326] compiled for 1.8.0, module version = 2.4.0
[ 13.326] Module class: X.Org XInput Driver
[ 13.326] ABI class: X.Org XInput driver, version 9.0
[ 13.326] (**) Power Button: always reports core events
[ 13.326] (**) Power Button: Device: "/dev/input/event4"
[ 13.333] (II) Power Button: Found keys
[ 13.333] (II) Power Button: Configuring as keyboard
[ 13.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.333] (**) Option "xkb_rules" "evdev"
[ 13.333] (**) Option "xkb_model" "evdev"
[ 13.333] (**) Option "xkb_layout" "us"
[ 13.377] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.377] (**) Power Button: always reports core events
[ 13.377] (**) Power Button: Device: "/dev/input/event2"
[ 13.387] (II) Power Button: Found keys
[ 13.387] (II) Power Button: Configuring as keyboard
[ 13.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.387] (**) Option "xkb_rules" "evdev"
[ 13.387] (**) Option "xkb_model" "evdev"
[ 13.387] (**) Option "xkb_layout" "us"
[ 13.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 13.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.387] (**) Sleep Button: always reports core events
[ 13.387] (**) Sleep Button: Device: "/dev/input/event3"
[ 13.397] (II) Sleep Button: Found keys
[ 13.397] (II) Sleep Button: Configuring as keyboard
[ 13.397] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 13.397] (**) Option "xkb_rules" "evdev"
[ 13.397] (**) Option "xkb_model" "evdev"
[ 13.397] (**) Option "xkb_layout" "us"
[ 13.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.401] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.410] (II) AT Translated Set 2 keyboard: Found keys
[ 13.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 13.410] (**) Option "xkb_rules" "evdev"
[ 13.410] (**) Option "xkb_model" "evdev"
[ 13.410] (**) Option "xkb_layout" "us"
[ 13.411] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.423] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 13.424] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 13.424] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[ 13.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[tigtex@mediacenter ~]$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
7096 frames in 5.0 seconds = 1419.008 FPS
7110 frames in 5.0 seconds = 1421.859 FPS
7111 frames in 5.0 seconds = 1422.168 FPS
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
[tigtex@mediacenter ~]$ lsmod | grep nvidia
nvidia 4657813 22
i2c_core 15144 2 i2c_viapro,nvidia
agpgart 23120 2 nvidia,via_agp
[root@mediacenter tigtex]# pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
there is nothing to do
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "856x481"
EndSubSection
EndSection
pacman -Qs nvidia
local/libvdpau 0.4-1
Nvidia VDPAU library
local/nvidia-96xx 96.43.16-3
NVIDIA drivers for kernel26, 96xx branch.
local/nvidia-96xx-utils 96.43.16-1
NVIDIA drivers utilities and libraries, 96xx branch.
Good luck with the mistery.
I didn't use anything else to install nvidia-96xx, it was with pacman. nvidia-96xx is no longer on repos but it was when i made the setup. I dont see why they removed it. Works 100% good here on my SD plasma. Even with games and xbmc.
Last edited by TigTex (2010-06-28 01:36:03)

Nvidia Open GL driver error when Photoshop CC is open

New PC, bought predominantly for Photoshop use. Downloaded trial of Photoshop CC and it keeps closing with this message -
"Nvidia Open GL Driver detected a problem with the display driver and is unable to continue. Tha application must close. Error Code 3"
This has happened with Photoshop just being open, as well as when in use.
If I untick "use graphics processor", I have no problems. My use of Photoshop is fairly basic (processing and editing photographs from a Nikon D7100), so I don't know what I will miss if I don't use the graphics processor.
Intel i7-3770 Quad Core (3.4ghz 8mb cache)
16gb DDR3 1866 mhz
2GB Nvidia GeForce GTX660 graphics card
Windows 7 professional 64 bit
I have updated the graphics card driver, which made no difference. Can anyone help with suggestions of why I'm getting the error, and what I can do about it please?
Thank you
Chris

Had to re-install windows and all drivers for other reasons, and having downloaded Photoshop CC again, I no longer have the problem.
Chris

Dv6809wm nvidia Ethernet Controller driver help me please.

My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
After installing Windows 7, nvidia Ethernet Controller, driver can not find.
Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
What should I do? You help me please.

This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file.
You may also want to try one of these drivers:
http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
Use the ones labelled: 3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
Post back if you need more help with this.

Nvidia (Quadro K2000) Driver isn't installed during OSD (Task Sequence succeeded) - HP Z620

Hi everyone,
I have added a driverset (HP Z620) in SCCM for the first time using our internal procedure (Importing Drivers to SCCM, Create Driver package with specific category, apply driver package in TS using WMI to query for the model).
The Task Sequence succeeded, but the NVIDIA K2000 Graphics driver isn't installed (only HD Graphics 4000 driver).
Looking at the drivers in the Driver Package, this should normally apply since the driver is compatible with this specific GPU.
At the forums, I can see that some people have created a seperate package for the GPU driver installation using command line switches.. But looking at the environment at the customer, we have never done this and in the past, we have succesfully installed
the driver for this GPU before.
PS: The driver for the GPU in my new driver package (HP Z620) isn't the same as for previous models (HP Z220, Z230, Z600).
Could you please advise me what to do? Should I have added something in the driver sources before importing the driver to SCCM?
Thanks in advance!
Kind regards

Hi
I m installing Nvidia (Quadro K2000) Driver during OSD (Task Sequence succeeded) - HP Z420
Remove the Graphics driver for NVIDIA from the current driver database
Added below task in the existing task sequence as invidual installation based on the Condition (WMI query)
Command Line
HP_Z420_Graphics_x64\Win64_332_50\setup.exe -s -k -clean -noeula
This will install the desired driver and related configurable components
WMI Query
select * from win32_ComputerSystem where manufacturer like '%hewlett%' and model like '%z420%'
Currently I m looking out for the Errors codes needed to add to this task . Success codes 3010 and 0 already added

Temperature increase in nvidia tab w/ driver change

I have a MSI FX5900SP VTD128. I installed the msi drivers that came w/ the card. The information on temperature on the nvidia tab in display advanced properties was about normal 40-41 idle in windows and 56 on load. The thing is I changed the msi driver to a nvidia latest driver 53.03, but when looking at the same temperature tab it reads now 56 when idle. I dont know which information is correct or what is the problem, Iwould appreciate if someone can help!
Thanks!

I have the same card. I used 53.03 at once so I do not know if there is a differens in temp but I did get 60 at idle and 85 under load. So i put on a Zalman ZM80C-HP which removed about 20 degrees which made me happy.
However that is an interesting issue. Perhaps if I get some time I will try the MSI driver to see if it shows a different temperature.
But surley there must be someone who has already done it?
/Nerd

Cannot install NVIDIA MCP55 System Driver 9.16

NVIDIA MCP55 System Driver 9.16 will not install. Anyone know why?

Quote from: Kujis on 03-August-06, 12:53:12
Hello!
I have same problem. I have tried to update it whit live-updata and for manually. When I install it, everything seems to goes okay, but after installing live-update shows that I still got v. 9.15.
I have allmost same mainboard than you, but ultra version. ( MSI nF570 ultra )
I have to ask, do you have had some problems while downloading? I have some problem in dual lan circuit. My computer shuts down if I download something in fast bit rate and do some browsing at the same time.
No, I'm not having the downloading problem.

(SOLVED) nvidia GT 650M driver 331.38 problem with bumblebee

Hello people. Since i updated my system to nvidia 338.38-3 via pacman the bumblebee service stopped working and now i have the following error when i started something with primusrun or optirun:
[ 2070.640091] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card
[ 2070.640141] [ERROR]Aborting because fallback start is disabled.
My bumblebee.conf it's like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
My xorg.conf.nvidia it's like this:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "falsa"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
If someone could enlighten me i would apreciate it..Thanks in advance
Last edited by CyberNhull (2014-03-12 10:50:32)

skualito wrote:
Try booting with this kernel parameter:
rcutree.rcu_idle_gp_delay=1
Thanks for the reply, i tried that and the error changed to:
[ 297.499172] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
I will post my log since it appears the graphics now is at least detected but not inicialized:
sudo cat /var/log/Xorg.8.log
[ 294.111]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 294.111] X Protocol Version 11, Revision 0
[ 294.111] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 294.111] Current Operating System: Linux Nhull-Greyk 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 294.111] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw rcutree.rcu_idle_gp_delay=1
[ 294.111] Build Date: 09 January 2014 08:47:24AM
[ 294.111]
[ 294.111] Current version of pixman: 0.32.4
[ 294.111] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 294.111] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 294.111] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Mar 11 10:51:03 2014
[ 294.111] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 294.111] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 294.111] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 294.111] (==) ServerLayout "Layout0"
[ 294.111] (==) No screen section available. Using defaults.
[ 294.111] (**) |-->Screen "Default Screen Section" (0)
[ 294.111] (**) | |-->Monitor "<default monitor>"
[ 294.111] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 294.111] (**) | |-->Device "DiscreteNvidia"
[ 294.111] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 294.111] (**) Option "AutoAddDevices" "false"
[ 294.111] (**) Option "AutoAddGPU" "false"
[ 294.111] (**) Not automatically adding devices
[ 294.111] (==) Automatically enabling devices
[ 294.111] (**) Not automatically adding GPU devices
[ 294.111] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 294.111] Entry deleted from font path.
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 294.111] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 294.112] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 294.112] (==) |-->Input Device "<default pointer>"
[ 294.112] (==) |-->Input Device "<default keyboard>"
[ 294.112] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 294.112] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 294.112] (II) Loader magic: 0x804c80
[ 294.112] (II) Module ABI versions:
[ 294.112] X.Org ANSI C Emulation: 0.4
[ 294.112] X.Org Video Driver: 15.0
[ 294.112] X.Org XInput driver : 20.0
[ 294.112] X.Org Server Extension : 8.0
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 294.112] setversion 1.4 failed: Permission denied
[ 294.113] (--) PCI:*(0:1:0:0) 10de:0fd1:144d:c0d1 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 294.113] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 294.113] Initializing built-in extension Generic Event Extension
[ 294.113] Initializing built-in extension SHAPE
[ 294.113] Initializing built-in extension MIT-SHM
[ 294.113] Initializing built-in extension XInputExtension
[ 294.113] Initializing built-in extension XTEST
[ 294.113] Initializing built-in extension BIG-REQUESTS
[ 294.113] Initializing built-in extension SYNC
[ 294.113] Initializing built-in extension XKEYBOARD
[ 294.113] Initializing built-in extension XC-MISC
[ 294.114] Initializing built-in extension SECURITY
[ 294.114] Initializing built-in extension XINERAMA
[ 294.114] Initializing built-in extension XFIXES
[ 294.114] Initializing built-in extension RENDER
[ 294.114] Initializing built-in extension RANDR
[ 294.114] Initializing built-in extension COMPOSITE
[ 294.114] Initializing built-in extension DAMAGE
[ 294.114] Initializing built-in extension MIT-SCREEN-SAVER
[ 294.114] Initializing built-in extension DOUBLE-BUFFER
[ 294.114] Initializing built-in extension RECORD
[ 294.114] Initializing built-in extension DPMS
[ 294.114] Initializing built-in extension Present
[ 294.114] Initializing built-in extension DRI3
[ 294.114] Initializing built-in extension X-Resource
[ 294.114] Initializing built-in extension XVideo
[ 294.114] Initializing built-in extension XVideo-MotionCompensation
[ 294.114] Initializing built-in extension XFree86-VidModeExtension
[ 294.114] Initializing built-in extension XFree86-DGA
[ 294.114] Initializing built-in extension XFree86-DRI
[ 294.114] Initializing built-in extension DRI2
[ 294.114] (II) "glx" will be loaded by default.
[ 294.114] (II) LoadModule: "dri2"
[ 294.114] (II) Module "dri2" already built-in
[ 294.114] (II) LoadModule: "glamoregl"
[ 294.114] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 294.135] (II) Module glamoregl: vendor="X.Org Foundation"
[ 294.135] compiled for 1.15.0, module version = 0.6.0
[ 294.135] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.135] (II) LoadModule: "glx"
[ 294.135] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 294.196] (II) Module glx: vendor="NVIDIA Corporation"
[ 294.197] compiled for 4.0.2, module version = 1.0.0
[ 294.197] Module class: X.Org Server Extension
[ 294.197] (II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
[ 294.197] Loading extension GLX
[ 294.197] (II) LoadModule: "nvidia"
[ 294.197] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 294.200] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 294.200] compiled for 4.0.2, module version = 1.0.0
[ 294.200] Module class: X.Org Video Driver
[ 294.200] (II) LoadModule: "mouse"
[ 294.200] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 294.201] (II) Module mouse: vendor="X.Org Foundation"
[ 294.201] compiled for 1.15.0, module version = 1.9.0
[ 294.201] Module class: X.Org XInput Driver
[ 294.201] ABI class: X.Org XInput driver, version 20.0
[ 294.201] (II) LoadModule: "kbd"
[ 294.201] (WW) Warning, couldn't open module kbd
[ 294.201] (II) UnloadModule: "kbd"
[ 294.201] (II) Unloading kbd
[ 294.202] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 294.202] (II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
[ 294.202] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 294.202] (--) using VT number 7
[ 294.202] (II) Loading sub module "fb"
[ 294.202] (II) LoadModule: "fb"
[ 294.202] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 294.203] (II) Module fb: vendor="X.Org Foundation"
[ 294.203] compiled for 1.15.0, module version = 1.0.0
[ 294.203] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.203] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 294.203] (II) Loading sub module "wfb"
[ 294.203] (II) LoadModule: "wfb"
[ 294.203] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 294.204] (II) Module wfb: vendor="X.Org Foundation"
[ 294.204] compiled for 1.15.0, module version = 1.0.0
[ 294.204] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.204] (II) Loading sub module "ramdac"
[ 294.204] (II) LoadModule: "ramdac"
[ 294.204] (II) Module "ramdac" already built-in
[ 294.204] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 294.204] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 294.204] (==) NVIDIA(0): RGB weight 888
[ 294.204] (==) NVIDIA(0): Default visual is TrueColor
[ 294.204] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 294.204] (**) NVIDIA(0): Option "NoLogo" "true"
[ 294.204] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 294.204] (**) NVIDIA(0): Option "UseEDID" "false"
[ 294.204] (**) NVIDIA(0): Option "UseDisplayDevice" "Screen1"
[ 294.204] (**) NVIDIA(0): Enabling 2D acceleration
[ 294.204] (**) NVIDIA(0): Ignoring EDIDs
[ 297.471] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 297.472] (II) NVIDIA(0): NVIDIA GPU GeForce GT 650M (GK107) at PCI:1:0:0 (GPU-0)
[ 297.472] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 297.472] (--) NVIDIA(0): VideoBIOS: 80.07.6a.00.0a
[ 297.472] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 297.475] (--) NVIDIA(0): Valid display device(s) on GeForce GT 650M at PCI:1:0:0
[ 297.475] (--) NVIDIA(0): CRT-0
[ 297.475] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 297.475] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
[ 297.475] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
[ 297.475] (EE) NVIDIA(0): to start anyway
[ 297.493] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 297.493] (II) UnloadModule: "nvidia"
[ 297.493] (II) UnloadSubModule: "wfb"
[ 297.493] (II) UnloadSubModule: "fb"
[ 297.493] (EE) Screen(s) found, but none have a usable configuration.
[ 297.493] (EE)
Fatal server error:
[ 297.493] (EE) no screens found(EE)
[ 297.493] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 297.493] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 297.493] (EE)
[ 297.493] (EE) Server terminated with error (1). Closing log file.
Last edited by CyberNhull (2014-03-11 10:59:41)

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600)

Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolution

Hi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L

10.4.10 will show external hard drive in Disk Utility (in turn, mount)

Here's the problem in a nutshell. When I'm running 10.4.10 my Seagate Barracuda 7200.10 (installed in an external enclosure) will not show up in Disk Utility (in turn also unable to mount). My DVD-RW burner will work, the enclosure is fine. When I boot off of the Mac OS X Install CD and run Disk Utility the drive and its partitions display. I did an archive and install and they were back in Mac OS X (10.4.7). - Rather than using Software Update, I decided to download the 10.4.10 Combo update manually and install (with the drive ejected and unplugged of course). Same issue once booting in Mac OS X 10.4.10...
Before I do an archive and install again, and revert to 10.4.9 indefinitely, is there anything I can try. I did googling, deleted some preference/cache files with no success.

This bug popped up after 10.4.9 was released and many folks (myself included) have experienced the same problem - after the install external hard drives, both FireWire and USB, are no longer accessible or visible.
In fact, I'm searching the discussion boards now to see if the 10.4.10 update fixed this. Apparently it has not.
Here are some other threads about this and 10.4.9 that might be of use to you:
http://discussions.apple.com/thread.jspa?threadID=897541
http://discussions.apple.com/thread.jspa?threadID=892387
I finally reverted to 10.4.8, which perfectly recognizes my external drives, and will not update until I know this bug has been fixed. As far as I know, reverting is unfortunately the only way to fix this issue.:(

DIsk Utility will not recognize my drive to erase.

Hello,
I am trying to erase my hard drive to install a new OS. I will be installing either OS 8.6 onto the 12 GIG ATA internal hard drive - the original hard drive.
I am using an OS 10.1 installer CD.
(I thought that DIsk Utility would be a better hard drive formatting utility than OS 8's drive setup utility.)
I first started up from the OS 10.1 installer CD and it first takes me through a few basic questions about the language (I chose English) and then a licencing question and I clicked agree. When it asks me which volume I would like to choose, both of my hard drives are shown but they are greyed-out (dimmed). When I hover over them with the mouse pointer, a small message appears to the left that says something like:
"This hard drive is dimmed because the CD installs all the languages"
This doesn't seem to make any sense. I was booted form the CD.
Why can I not use this installer to erase my hard drive?
This is a retail version of OSX with a white label. It came with two disks: OS9 and 10.1. The symptoms described above happened with the 10.1 disk. Next I will try OS 9. However I would like to know why my DIsk Utility on the OS 10.1 CD didn't show my drive as available. Any suggestions why the hard dirves were grayed out?
Thanks

Thanks Lau for you comments.
I need to install os8 because I need to run some old apps and I am using my os 9 for another computer I have.
By the way, the HFS+ file system was suuported from OS 8.1 and after and so that is not an issue. Good idea though.
And so I am back at my original question. It would appear that my OS X install disk doesn't like my blue and white G3's internal 12 GIG ATA drive and so I cannot format it with OSX Disk Utility. I would like to know why but for now I will just use OS 9 or OS8 drive setup. And so I have two choices: OS9 drive setup or OS8.5 Drive setup. Does it matter which I use? In other words is one better than the other? I will be later installing OS 8.6 onto this drive - and maybe OS 9 in the far future. I will try OS9's drive setup first.
Yes, and so this is my most immediate question at this point:
is there a difference between OS8.5 drive setup and OS9's Drive setup? (in terms or formatting a drive to install OS 8, 9 or even X maybe one day?) I will be using HFS+.
And then my second question is my original question which is why doesn't my OS 10.1.5 Disk Utility select my 12 GIG ATA drive? (its greyed out - dimmed?)
Thanks

I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things

I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things. And secondly does RAM memory cards go bad. Here's the info on my IMac:
Model Name:          iMac
Model Identifier:          iMac6,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM61.0093.B07
SMC Version (system):          1.10f2

I need to erase my hard drive and start anew
Why do you feel you need to do this? That is such a 'Windows thing' to do!
And secondly does RAM memory cards go bad
Very rarely, but nothing in life is guaranteed (except death and taxes)! If you purchased RAM from a reputable source like Crucial or OWC it will carry a lifetime warranty.

Will NVIDIA GeForce2 TwinView drive a 23" CHD display?

Similar Messages

Maybe you are looking for